journal article·2021-01

Contact Corrosion of Metals under Low Amplitude Fretting

V. V. Shevelya, A. L. Ganzjuk, G. S. Kalda, Yu. S. Sokolan

Journal of Friction and Wear· Volume 42· Issue 1
Publisher page

Abstract

This article discusses fretting corrosion of different friction couples with the consideration of mechanical properties, chemical activity of contacted materials, effect of gaseous environment composition, and external electric current. It has been demonstrated that the fretting wear rate of materials of a friction couple depends on the difference of their electrode potentials. On the basis of the electron theory of adsorption and catalysis on semiconductors (oxides), the physical and chemical formation of a corrosive medium in the area of frictional contact, promoting development of electrochemical processes, have been analyzed. It is mentioned that the catalytic action of an oxide interlayer in fine dispersion is exposed in chemosorption acceleration of oxygen and moisture in a reactive radical in ion radical forms. It has been demonstrated that the existence of cathodic impurities in the alloy and an increase in cathodic depolarizer content (oxygen) in the friction area increases corrosion loss stipulated by electrochemical processes. Relative contribution of chemical and electrochemical corrosion of the friction contact is estimated during the progress of fretting. It is mentioned that the factors delaying the electrochemical processes are efficient for minimization of the fretting wear rate. Opportunities of application of cathodic and anodic electrochemical protection against fretting corrosion are considered.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Mechanical stress and fatigue analysis · Electrical Contact Performance and Analysis · Lubricants and Their Additives

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. Golego, N.L., Alyab’ev, A.Ya., and Shevelya, V.V., Fretting-korroziya metallov (Fretting Corrosion of Metals), Kiev: Tekhnika, 1974.
2. Waterhouse von, R.B., Fretting Corrosion, Oxford: Pergamon, 1972.
3. Shevelya, V.V. and Kalda, G.S., Fretting-ustalost’ metallov (Fretting Fatigue of Metals), Khmelnytskyi: Podillya, 1998.
4. Shevelya, V.V. and Oleksandrenko, V.P., Tribokhimiya i reologiya iznosostoikosti (Tribochemistry and Rheology of Wear Resistance), Khmelnytskyi: Khmeln. Nats. Univ., 2006.
5. Zhu, M.H. and Zhou, Z.R., On the mechanisms of various fretting wear modes, Tribol. Int., 2011, vol. 44, no. 11, pp. 1378–1388.10.1016/j.triboint.2011.02.010 ↗
6. Varenberg, M., Halperin, G., and Etsion, I., Different aspects of the role of wear debris in fretting wear, Wear, 2002, vol. 252, pp. 902–910.10.1016/S0043-1648(02)00044-3 ↗
7. Zhuk, N.P., Kurs teorii korrozii i zashchity metallov (Theoretical Course on Corrosion and Protection of Metals), Moscow: Metallurgiya, 1976.
8. Wright, K.H.R., An investigation of fretting corrosion, Proc. Inst. Mech. Eng., 1953, vol. 167, no. 1B, pp. 556–574.10.1177/002034835316701b34 ↗
9. Soda, N. and Aoki, A., On fretting corrosion: Part 1. Nature of fretting corrosion, Trans. Jpn. Soc. Mech. Eng., 1959, vol. 25, no. 158, pp. 995–1004.10.1299/kikai1938.25.995 ↗
10. Endo, K. and Goto, H., Effect of environment on fretting fatigue, Wear, 1978, vol. 48, no. 10, pp. 347–367.10.1016/0043-1648(78)90232-6 ↗
11. Ahmadi, A., Sadeghi, F. and Shaffer, S., In-situ friction and fretting wear measurements of Inconel 617 at elevated temperatures, Wear, 2018, vols. 410–411, pp. 110–118.10.1016/j.wear.2018.06.007 ↗
12. Pearson, S.R., Shipwaj, P.H., Abere, J.O., and Hewitt, R.A.A., The effect of temperature on wear and friction of a high strength steel in fretting, Wear, 2013, vol. 303, pp. 622–631.10.1016/j.wear.2013.03.048 ↗
13. Guo, X., Lai, P., Tang, L., et al., Effects of sliding amplitude and normal load on the fretting wear behavior of alloy 690 tube exposed to high temperature water, Tribol. Int., 2017, vol. 116, pp. 155–163.10.1016/j.triboint.2017.07.001 ↗
14. GOST (State Standard) 23.211–80: Products Wear Resistance Assuring. Testing of Materials for Wear under Fretting and Fretting-Corrosion Conditions, Moscow: Izd. Standartov, 1982.
15. Vol’kenshtein, F.F., Elektronnye protsessy na poverkhnosti poluprovodnikov pri khemosorbtsii (Electron Processes on the Surface of Semiconductors during Chemisorption), Moscow: Nauka, 1987.
16. Kiselev, V.F. and Krylov, O.V., Adsorbtsionnye protsessy na poverkhnosti poluprovodnikov i dielektrikov (Adsorption Processes on the Surface of Semiconductors and Dielectrics), Moscow: Nauka, 1978.
17. Krylov, O.V. and Kiselev, V.F., Adsorbtsiya i kataliz na perekhodnykh metallakh i ikh oksidakh (Adsorption and Catalysis on Transition Metals and Their Oxides), Moscow: Nauka, 1981.
18. Morrison, S.R., The Chemical Physics of Surfaces, New York: Springer-Verlag, 1990, 2nd ed.10.1007/978-1-4899-2498-8 ↗
19. Shluger, M.A., Azhogin, F.F., and Efimov, E.A., Korroziya i zashchita metallov (Corrosion and Protection of Metals), Moscow: Metallurgiya, 1981.