Synthesis and Characterization of Melt-Spun Metastable Al6Ge5
Source abstract
Abstract
The electronic structure and thermoelectric (TE) properties of metastable Al6Ge5 were investigated. The crystal structure with nominal composition Al6Ge5 is identified as isostructural to the high-performance TE material Zn4Sb3. The calculated density of states (DOS) shows that Al6Ge5 is a semiconductor with small bandgap of E g = 0.44 eV. Moreover, as Al6Ge5 has sharp edges in the DOS near the Fermi energy, high Seebeck coefficient (S) values are expected. Ribbon samples of Al6Ge5 were prepared using a single-roll melt-spinning method. We developed a process to prepare Al6Ge5 as the main component using this method under various optimal conditions, mainly cooling rate. Room-temperature values for S and electrical conductivity are −17.5 μV K−1 and 2.64 × 104 Ω−1 m−1, respectively. The κ value of around 0.5 W m−1 K−1 at room temperature is considerably low. Although Al6Ge5 has potential to be a good TE material, the S value of the prepared samples is low, like metals, mainly due to impurities existing in the samples. High zT is considered obtainable by preparing high-purity single-phase Al6Ge5 with optimized carrier concentration.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. C.J. Vineis, A. Shakouri, A. Majumdar, and M.G. Kanatzidis, Adv. Mater. 22, 3970 (2010).10.1002/adma.201000839 ↗
2. G. Joshi, H. Lee, Y. Lan, X. Wang, G. Zhu, D. Wang, R.W. Gould, D.C. Cuff, M.Y. Tang, M.S. Dresselhaus, G. Chen, and Z. Ren, Nano Lett. 8, 4670 (2008).10.1021/nl8026795 ↗
3. J. Tani and H. Kido, Phys. B 364, 218 (2005).10.1016/j.physb.2005.04.017 ↗
4. T. Laoui and M.J. Kaufman, Metall. Trans. A 22, 2141 (1991).10.1007/BF02669882 ↗
5. M.J. Kaufman and H.L. Fraser, Acta Metall. 33, 191 (1985).10.1016/0001-6160(85)90137-3 ↗
6. R. Vincent and D.R. Exelby, Acta Cryst. A 51, 801 (1995).10.1107/S0108767395006404 ↗
7. T. Caillat, J.-P. Fleurial, and A. Borshchevsky, J. Phys. Chem. Solids 58, 1119 (1997).10.1016/S0022-3697(96)00228-4 ↗
8. J.P. Perdew, K. Burke, and M. Ernzerhof, Phys. Rev. Lett. 77, 3865 (1996).10.1103/PhysRevLett.77.3865 ↗
9. P.E. Blochl, Phys. Rev. B 50, 17953 (1994).10.1103/PhysRevB.50.17953 ↗
10. G. Kresse and D. Joubert, Phys Rev. B 59, 1758 (1999).10.1103/PhysRevB.59.1758 ↗
11. G. Kresse and J. Hafner, Phys. Rev. B 47, 558 (1993).10.1103/PhysRevB.47.558 ↗
12. G. Kresse and J. Furthmuller, Comput. Mater. Sci. 6, 15 (1996).10.1016/0927-0256(96)00008-0 ↗
13. G. Kresse and J. Furthmuller, Phys. Rev. B 54, 11169 (1996).10.1103/PhysRevB.54.11169 ↗
14. H.J. Monkhorst and J.D. Pack, Phys. Rev. B 13, 5188 (1976).10.1103/PhysRevB.13.5188 ↗
15. N. Uchida, T. Tada, Y. Ohishi, Y. Miyazaki, K. Kurosaki, and S. Yamanaka, J. Appl. Phys. 114, 134311 (2013).10.1063/1.4823814 ↗
16. A.S. Mikhaylushkin, J. Nylen, and U. Haussermann, Chem. Eur. J. 11, 4912 (2005).10.1002/chem.200500020 ↗
17. V.T. Swamy, K. Chattopadhyay, and S. Ranganathan, Mater. Sci. Eng. A 123, 247 (1990).10.1016/0921-5093(90)90290-J ↗
18. G. Swanson and K. Tatge, Natl. Bur. Stand. Circ. 1, 18 (1951).
19. H.M. Otte, J. Appl. Phys. 32, 1536 (1961).10.1063/1.1728392 ↗
20. E. Kim, Z.-T. Jiang, and K. No, Jpn. J. Appl. Phys. 39, 4820 (2000).10.1143/JJAP.39.4820 ↗
21. J. Tauc, R. Grigorovici, and A. Vancu, Phys. Status Solidi 15, 627 (1966).10.1002/pssb.19660150224 ↗
22. E.A. Davis and N.F. Mott, Philos. Mag. 22, 903 (1970).10.1080/14786437008221061 ↗
23. W. Bludau, A. Onton, and W. Heinke, J. Appl. Phys. 45, 1846 (1974).10.1063/1.1663501 ↗
24. J.W. Precker and M.A. Silva, Am. J. Phys. 70, 1150 (2002).10.1119/1.1512658 ↗