journal article·2015-11

Effect of Oxygen Annealing on the Electrical Properties of PBLZST Anti-ferroelectric Ceramics

Jinqiao Yi, Xue Xiong, Sisi Liu, Shenglin Jiang

Journal of Electronic Materials· Volume 44· Issue 11
Publisher page

Abstract

The effect of oxygen annealing on the electrical properties of (Pb0.97−xBax La0.02)(Zr0.6Sn0.32Ti0.08)O3 (PBLZST) anti-ferroelectric (AFE) ceramics has been investigated through measuring its phase structure, electric field-induced polarization and dielectric properties. The oxygen annealing process can significantly improve the stability of the AFE phase and decrease the dielectric constant peaks. The saturation polarization of the PBLZST samples annealed in O2 increases gradually when x 0.085. Compared with the conventional sintering method, the hysteresis switch fields of samples annealed in O2 maintains the consistent stability, and the dielectric constant peaks drop drastically and are simultaneously broadened, except at x = 0.095. The Curie temperature decreases greatly after oxygen annealing when x is smaller than 0.08, but increases slightly when x is greater than 0.08. When x = 0.085, the difference of c/a ratios between the samples processed by the two methods reaches a maximum of about 0.00614, and the increment of the saturation polarization is 7 μC/cm2.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Acoustic Wave Resonator Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. O. Essig, P. Wang, M. Hartweg, P. Janker, H. Nafe, and F. Aldinger, J. Eur. Ceram. Soc. 19, 1223 (1999).10.1016/S0955-2219(98)00407-5 ↗
2. Y.H. Xu, H.Z. Guo, X.M. Liu, Y.J. Feng, and X.L. Tan, J. Am. Ceram. Soc. 97, 206 (2014).10.1111/jace.12585 ↗
3. P.J.Q. Cortes and J. Phillips, J. Electron. Mater. 44, 1367 (2015).10.1007/s11664-015-3641-8 ↗
4. Q.F. Zhang, S.L. Jiang, Y.K. Zeng, M.Y. Fan, G.Z. Zhang, and Y.Y. Zhang, J. Appl. Phys. 109, 124111 (2011).10.1063/1.3596577 ↗
5. H.L. Zhang, X.F. Chen, F. Cao, G.S. Wang, X.L. Dong, and Y. Gu, J. Appl. Phys. 108, 086105 (2010).10.1063/1.3476284 ↗
6. Q.N. Zheng, T.Q. Yang, Y.W. Luo, and X. Yao, Ferroelectrics 403, 51 (2010).10.1080/00150191003750861 ↗
7. S.L. Jiang, L. Zhang, G.Z. Zhang, S.S. Liu, J.Q. Yi, X. Xiong, Y. Yu, J.G. He, and Y.K. Zeng, Ceram. Int. 39, 5571 (2013).10.1016/j.ceramint.2012.12.071 ↗
8. L. Zhang, S.L. Jiang, B.Y. Fan, and G.Z. Zhang, Ceram. Int. 41, 1139 (2015).10.1016/j.ceramint.2014.09.041 ↗
9. L. Zhang, S.L. Jiang, B.Y. Fan, and G.Z. Zhang, J. Alloys Compd. 622, 162 (2015).10.1016/j.jallcom.2014.09.171 ↗
10. Z.P. Yang, Y.T. Hou, H. Pan, and Y.F. Chang, J. Alloys Compd. 480, 246 (2009).10.1016/j.jallcom.2009.02.030 ↗
11. M.J. Pan, S. Park, K.A. Markowski, W.S. Hackenberger, S. Yoshikawa, and L.E. Cross, Ferroelectrics 215, 153 (2010).10.1080/00150199808229559 ↗
12. C.R. Zhou, X.Y. Liu, W.Z. Li, and C.L. Yuan, J. Alloys Compd. 478, 381 (2009).10.1016/j.jallcom.2008.11.057 ↗
13. K.K. Misshra, V. Sivasubramanian, A.K. Arora, and R.M. Sarguna, J. Alloys Compd. 550, 514 (2013).10.1016/j.jallcom.2012.10.135 ↗
14. M. Ye, Q. Sun, X.Q. Chen, Z.H. Jiang, and F.P. Wang, J. Am. Ceram. Soc. 94, 3234 (2011).10.1111/j.1551-2916.2011.04814.x ↗
15. S.E. Park, K. Markowski, S. Yoshikawa, and L.E. Cross, J. Am. Ceram. Soc. 80, 407 (1997).10.1111/j.1151-2916.1997.tb02845.x ↗
16. G.Z. Zhang, S.S. Liu, Y. Yu, Y.K. Zeng, Y.Y. Zhang, X. Hu, and S.L. Jiang, J. Eur. Ceram. Soc. 33, 113 (2013).10.1016/j.jeurceramsoc.2012.08.011 ↗
17. C.L. Mao, S. Cao, C.H. Yao, F. Cao, K. Li, W. Liu, G.S. Wang, X.L. Dong, X. Hu, and C.L. Yang, J. Am. Ceram. Soc. 94, 2003 (2011).10.1111/j.1551-2916.2011.04621.x ↗
18. W. Sebastian, F. Stefan, B. Olaf, and E. Wolfgang, J. Alloys Compd. 548, 38 (2013).10.1016/j.jallcom.2012.08.099 ↗
19. J.H. Moon and H.M. Jang, J. Am. Ceram. Soc. 76, 549 (1993).10.1111/j.1151-2916.1993.tb03825.x ↗
20. S. Budak, M. Baker, J. Lassiter, C. Smith, C. Muntele, and R.B. Johnson, J. Electron. Mater. 44, 1420 (2015).10.1007/s11664-014-3386-9 ↗
21. W.Z. Lu, Y. Wang, G.F. Fan, X.H. Wang, and F. Liang, J. Alloys Compd. 509, 2738 (2011).10.1016/j.jallcom.2010.10.041 ↗
22. M. Hamme and M.J. Hoffmann, J. Am. Ceram. Soc. 81, 3277 (1998).10.1111/j.1151-2916.1998.tb02768.x ↗
23. C. Elissalde, U.C. Chung, A. Artemenko, C. Estourne`s, R. Costes, M. Pate′, J.P. Ganne, S. Waechter, and M. Maglione, J. Am. Ceram. Soc. 95, 3239 (2012).10.1111/j.1551-2916.2012.05311.x ↗
24. Q.N. Zheng, T.Q. Yang, Y.W. Luo, and X. Yao, Ferroelectrics 403, 54 (2012).10.1080/00150191003750861 ↗