journal article·2020-11

Device Characteristics of E-mode GaN HEMTs with a Second Gate Connected to the Source

Chih-Wei Chen, Wei-Chen Ho, Yue-Ming Hsin, Jerry Tzou, Wen-Hsien Huang, Chang-Hong Shen, Jia-Ming Shieh, Wen-Kuan Yeh, Wen-Ta Hsu, Sze-Ching Liu

Journal of Electronic Materials· Volume 49· Issue 11
Publisher page

Abstract

In this study, the device characteristics of dual-gate GaN high-electron-mobility transistors (HEMTs) were determined. The research investigated an enhancement-mode (E-mode) GaN HEMT with a second gate connected to the source and located between the main gate and drain. Two dual-gate GaN HEMTs with different second-gate designs, using Schottky or metal–insulator–semiconductor (MIS) contacts, were simulated and fabricated, and the direct current of the devices was investigated. In device simulation, p-GaN gates were used to achieve E-mode operation in HEMTs. Technology computer-aided design (TCAD) simulation indicated that the saturation drain current (ID, sat) of devices with Schottky and MIS second gates was 88% and 38% lower than that of a single gate structure, while increasing on resistance (Ron) by 31% and 8%, respectively. In device fabrication, a Schottky and MIS second gate were respectively added to an E-mode p-GaN gate HEMT and an E-mode recesses-gate GaN MIS-HEMT. Compared with single-gate structures, the devices with a Schottky and MIS second gates reduced ID, sat by 75% and 32%, respectively, while increasing Ron by 25% and 6%, respectively. The measured electrical characteristics indicate the same trend obtained from TCAD simulation: The dual-gate design can improve the short-circuit capability of GaN HEMTs by reducing the ID, sat under on-state and high-current conditions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: GaN-based semiconductor devices and materials · Silicon Carbide Semiconductor Technologies · Semiconductor Quantum Structures and Devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (9)

Show source-provided references
1. W. Saito, Y. Takada, M. Kuraguchi, K. Tsuda, and I. Omura, IEEE Trans. Electron Devices 53, 356 (2006).10.1109/TED.2005.862708 ↗
2. Kevin J. Chen, L. Yuan, M.J. Wang, H. Chen, S. Huang, Q. Zhou, C. Zhou, B.K. Li, and J.N. Wang, IEEE IEDM (2011). https://doi.org/10.1109/iedm.2011.6131585.10.1109/iedm.2011.6131585 ↗
3. Ki-Sik Im, Ryun-Hwi Kim, Ki-Won Kim, Dong-Seok Kim, Chun Sung Lee, Sorin Cristoloveanu, and Jung-Hee Lee, IEEE Electron Device Lett. 34, 27 (2013).10.1109/LED.2012.2222861 ↗
4. Giuseppe Greco, Ferdinando Iucolano, and Fabrizio Roccaforte, Mater. Sci. Semicond. Process. 78, 96 (2018).10.1016/j.mssp.2017.09.027 ↗
5. M. Fernández, X. Perpiñà, J. Roig, M. Vellvehi, F. Bauwens, X. Jordà, and M. Tack, IEEE Electron Device Lett. 38, 505 (2017).10.1109/LED.2017.2665163 ↗
6. Youngshin Eum, Kazuhiro Oyama, Nobuyuki Otake, and Shinichi Hoshi, Int. Symp. Power Semicond. Devices ICs (2017). https://doi.org/10.23919/ISPSD.2017.7988921.10.23919/ISPSD.2017.7988921 ↗
7. S. Bhalla, J. Shekhawat, J. Gladish, J. Yedinak, and G. Dolny, Int. Symp. Power Semicond. Devices ICs (1998). https://doi.org/10.1109/ispsd.1998.702679.10.1109/ispsd.1998.702679 ↗
8. M. Landel, C. Gautier, D. Labrousse, and S. Lefebvre, Microelectron. Reliab. 64, 560 (2016).10.1016/j.microrel.2016.07.042 ↗
9. Manuel Fernández, Xavier Perpiñà, Jaume Roig-Guitart, Miquel Vellvehi, Filip Bauwens, Marnix Tack, and Xavier Jordà, IEEE Trans. Ind. Electron. 64, 9012 (2017).10.1109/TIE.2017.2719599 ↗