journal article·2016-10

Effect of Element Substitution at V site on Thermoelectric Properties of Aurivillius Phase Bi2VO5.5

Hitoshi Kohri, Takayoshi Yagasaki

Journal of Electronic Materials· Volume 45· Issue 10
Publisher page

Abstract

Thermoelectric oxides are suitable at the high temperature range because of chemical stability. Aurivillius compounds are bismuth layered oxides, and known as oxygen ion conductors. The Aurivillius compounds consist of Perovskite layers and Bi-O layers. It is expected that nano-layered structure shows high Seebeck coefficients due to the quantum confinement of carriers in Perovskite layers. It was reported that the Seebeck coefficient of hot pressed specimens for Aurivillius phase Bi2VO5.5 was a high value of −28.3 mVK−1 at 1010 K, and the electrical resistivity of one was also a high value of 0.033 Ωm at 1010 K. In this paper, the effect of element substitution at the V site on thermoelectric properties of Aurivillius phase Bi2VO5.5 was investigated. Bi2V1−x M x O5.5 (M = Cr, Mo, W x = 0, 0.05, 0.1, 0.2) were prepared by solid-state reaction. The electrical resistivity of Cr-substituted specimens were indicated at larger values than the ones for unsubstituted specimens over the measurement temperature range. The resistivity above 800 K was reduced by substitution of W or Mo. W as a substituted element was effective for reducing the thermal conductivity of Bi2VO5.5. The maximum value of the dimensionless figure of merit ZT was 0.05 at 799 K for Bi2V0.8Mo0.2O5.5 and at 902 K for Bi2V0.8W0.1O5.5. The maximum ZT of an unsubstituted sample was 0.02 at 993 K. From these results, it was found that tungsten or molybdenum substitution was effective to improve ZT for Aurivillius phase Bi2VO5.5.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Gas Sensing Nanomaterials and Sensors · Magnetic and transport properties of perovskites and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. T. Uesugi, H. Kohri, I. Shiota, M. Kato, and I.J. Ohsugi, Adv. Sci. Technol. 54, 211 (2008).10.4028/www.scientific.net/AST.54.211 ↗
2. H. Kohri, I. Shiota, M. Kato, and I.J. Ohsugi, Adv. Sci. Technol. 54, 195 (2008).10.4028/www.scientific.net/AST.54.195 ↗
3. T. Uesugi, H. Kohri, I. Shiota, M. Kato, and I.J. Ohsugi, Mater. Sci. Forum 631–632, 489 (2010).
4. L.D. Hicks and M.S. Dresselhaus, Phys. Rev. B 47, 12727 (1993).10.1103/PhysRevB.47.12727 ↗
5. Y. Suge, Netsudenhandoutai (Thermoelectric Semiconductor) (Maki Shoten: Tokyo, 1966), 284.
6. K.R. Kendall, C. Navas, J.K. Thomas, and H.-C. zur Loye, Chem. Mater. 8, 642 (1996).10.1021/cm9503083 ↗
7. R.N. Vannier, G. Mairesse, F. Abraham, G. Nowogrocki, E. Pernot, M. Anne, M. Bacmann, P. Strobel, and J. Fouletier, J. Fouletier Solid State Ionics 78, 183 (1995).10.1016/0167-2738(95)00110-R ↗
8. J. Yan and M. Greenblatt, Solid State Ionics 81, 225 (1995).10.1016/0167-2738(95)00187-B ↗
9. Y. Taninouchi, T. Uda, T. Ichitsubo, Y. Awakura, and E. Matsubara, Solid State Ionics 181, 1279 (2010).10.1016/j.ssi.2010.06.052 ↗
10. Y. Taninouchi, T. Uda, T. Ichitsubo, Y. Awakura, and E. Matsubara, Solid State Ionics 181, 719 (2010).10.1016/j.ssi.2010.04.005 ↗
11. R.N. Vannier, E. Pernot, M. Anne, O. Isnard, G. Nowogrocki, and G. Mairesse, Solid State Ionics 157, 147 (2003).10.1016/S0167-2738(02)00202-3 ↗
12. F. Abraham, M.F. Debreuille-Gresse, G. Mairesse, and G. Nowogrocki, Solid State Ionics 1, 28 (1988).
13. R.N. Vannier, R.J. Chater, S.J. Skinner, J.A. Kilner, and G. Mairesse, Solid State Ionics 160, 327 (2003).10.1016/S0167-2738(03)00206-6 ↗
14. C. Pirovano, R.N. Vannier, E. Capoen, G. Nowogrocki, J.C. Boivin, G. Mairesse, M. Anne, E. Dooryhee, and P. Strobel, Solid State Ionics 159, 167 (2003).10.1016/S0167-2738(03)00077-8 ↗
15. T. Iharada, A. Hammouche, J. Fouletier, M. Kleitz, J.C. Boivin, and G. Mairesse, Solid State Ionics 48, 257 (1991).10.1016/0167-2738(91)90040-I ↗
16. J.C. Boivin, C. Pirovano, G. Nowogrocki, G. Mairesse, Ph Labrune, and G. Lagrange, Solid State Ionics 113–115, 639 (1998).10.1016/S0167-2738(98)00330-0 ↗
17. E. Capoen, M.C. Steil, G. Nowogrocki, M. Malys, C. Pirovano, A. Loefberg, E. Bordes-Richard, J.C. Boivin, G. Mairesse, and R.N. Vannier, Solid State Ionics 177, 483 (2006).10.1016/j.ssi.2005.12.015 ↗
18. H.S. Cho, G. Sakai, K. Shimanoe, and N. Yamazoe, Sens. Actuators B 109, 307 (2005).10.1016/j.snb.2004.12.062 ↗
19. K.B.R. Varma, G.N. Subbanna, K. Guru RowTN, and C.N.R. Rao, J. Mater. Res. 5, 2718 (1990).10.1557/JMR.1990.2718 ↗
20. F. Abraham, J.C. Boivin, G. Mairesse, and G. Nowogrocki, Solid State Ionics 40–41, 934 (1990).10.1016/0167-2738(90)90157-M ↗
21. A. Watanabe and K. Das, J. Solid State Chem. 163, 224 (2002).10.1006/jssc.2001.9396 ↗
22. H. Kohri, M. Kato, I.J. Ohsugi, and I. Shiota, Adv. Sci. Technol. 74, 72 (2010).10.4028/www.scientific.net/AST.74.72 ↗
23. H. Kohri and T. Yagasaki, Adv. Sci. Technol. 77, 285 (2013).10.4028/www.scientific.net/AST.77.285 ↗
24. R.N. Vannier, G. Mairesse, F. Abraham, and G. Nowogrocki, Solid State Ionics 80, 11 (1995).10.1016/0167-2738(95)00123-N ↗
25. Y. Taninouchi, T. Uda, Tetsu Ichitsubo, Yasuhiro Awakura, and Eiichiro Matsubara, J. Alloys Compd. 509, 5833 (2011).10.1016/j.jallcom.2011.02.137 ↗
26. G.Q. Shao, Y. Xiao-Hua, W. Cai, G. Hong-Xing, J. Li, B. Li, W. Bo-Lin, and S.X. Ouyang, Solid State Ionics 219, 20 (2012).10.1016/j.ssi.2012.05.001 ↗
27. G. Mairesse, P. Roussel, R.N. Vannier, M. Anne, C. Pirovano, and G. Nowogrocki, Solid State Sci. 5, 851 (2003).10.1016/S1293-2558(03)00015-3 ↗
28. G. Mairesse, P. Roussel, R.N. Vannier, M. Anne, and G. Nowogrocki, Solid State Sci. 5, 861 (2003).10.1016/S1293-2558(03)00016-5 ↗