Low-Temperature Sintering and Enhanced Dielectric Properties of BaZr0.2Ti0.8O3-Based Y5V Ceramics with Li2CO3 to Reduce the Sintering Temperature
Source abstract
Abstract
We synthesized BaTi0.8Zr0.2O3 (BZT)-based powders using the sol–gel method, and introduced Li2CO3 with a low melting point (723°C) as a source of the liquid phase to reduce the sintering temperature (Ts) and improve the dielectric properties of the BZT-based ceramics. The x-ray powder diffractometer patterns exhibited a perovskite structure in all samples. The scanning electron microscope images revealed that the sinterability of the BZT-based ceramics was improved by adding an appropriate amount (3.0 wt.%) of Li2CO3; Ts decreased from 1280°C to 1100°C. The BZT-based ceramics sintered at 1100°C with 3.0 wt.% Li2CO3 met the Y5V requirements, with good electrical properties: emax = 17987, er = 15950, and tan δ = 0.02. The results indicated that Li2CO3 can improve the dielectric properties and reduce the Ts of BZT-based ceramics. Our method therefore represents a less expensive approach for developing materials suitable for use in multilayer capacitors.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Dielectric properties of ceramics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. J. Qi, Z. Gui, Y.L. Wang, Q. Li, and L. Li, J. Mater. Sci. Lett. 21, 405 (2002).10.1023/A:1014975721600 ↗
2. X. Chou, J. Zhai, J. Sun, and X. Yao, Ceram. Int. 4, 911 (2008).10.1016/j.ceramint.2007.09.056 ↗
3. J. Hong and H. Lu, J. Am. Ceram. Soc. 97, 2256 (2014).10.1111/jace.12896 ↗
4. X. Zhang, Z. Yue, B. Peng, Z. Xie, L. Yuan, and J. Zhang, J. Am. Ceram. Soc. 97, 2921 (2014).10.1111/jace.13078 ↗
5. Y.L. Wang, L.T. Li, J.Q. Qi, and Z. Gui, Ceram. Int. 28, 657 (2002).10.1016/S0272-8842(02)00023-8 ↗
6. Y.C. Wu, J.S. Lee, H.Y. Lu, and C.L. Hu, J. Electroceram. 18, 13 (2007).10.1007/s10832-007-9003-z ↗
7. K. Miao, X. Wang, D. Hu, Y. Wang, and J. Xiao, Ceram. Int. 43, 9099 (2017).10.1016/j.ceramint.2017.04.056 ↗
8. J. Wang, S.L. Jiang, D. Jiang, J. Tian, Y. Li, and Y. Wang, Ceram. Int. 38, 5853 (2012).10.1016/j.ceramint.2012.04.036 ↗
9. Y. Wang, K. Miao, and R. Ma, Ceram. Int. 42, 14627 (2016).10.1016/j.ceramint.2016.06.083 ↗
10. Y. Wang, B. Cui, L. Zhang, Z. Hu, and Y. Wang, Ceram. Int. 40, 11681 (2014).10.1016/j.ceramint.2014.03.177 ↗
11. H.S. Mohanty, T. Dam, H. Borkar, D.K. Pradhan, K.K. Mishra, A. Kumar, B. Sahoo, P.K. Kulriya, C. Cazorla, J.F. Scott, and D.K. Pradhan, J. Phys. Condens. Matter 31, 075401 (2019).10.1088/1361-648X/aaf405 ↗
12. H.S. Mohanty, A. Kumar, B. Sahoo, P.K. Kurliya, and D.K. Pradhan, J. Mater. Sci. Mater. 29, 6966 (2018).10.1007/s10854-018-8683-2 ↗
13. M. Valant, D. Suvorov, R.C. Pullar, K. Sarma, and N.M. Alford, J. Eur. Ceram. Soc. 26, 2777 (2006).10.1016/j.jeurceramsoc.2005.06.026 ↗
14. J.J. Ruiz-Valdés, A.V. Gorokhovsky, and J.I. Escalante-García, J. Eur. Ceram. Soc. 24, 1505 (2004).10.1016/S0955-2219(03)00531-4 ↗
15. H.I. Hsiang, C.S. His, C.C. Huang, and S.L. Fu, J. Alloys Compd. 459, 307 (2008).10.1016/j.jallcom.2007.04.218 ↗
16. H. Sun, Y. Zhang, X. Liu, Y. Liu, and W. Chen, Ceram. Int. 41, 555 (2015).10.1016/j.ceramint.2014.08.104 ↗
17. W.G. Yang, B.P. Zhang, N. Ma, and L. Zhao, J. Eur. Ceram. Soc. 32, 899 (2012).10.1016/j.jeurceramsoc.2011.10.054 ↗
18. W.Y. Hee and K.J. Hyuk, Integr. Ferroelectr. 86, 59 (2006).10.1080/10584580601085131 ↗
19. L. Zhao, B.P. Zhang, and P.F. Zhou, J. Eur. Ceram. Soc. 35, 533 (2015).10.1016/j.jeurceramsoc.2014.08.042 ↗
20. L. Zhao, B.P. Zhang, and P.F. Zhou, J. Am. Ceram. Soc. 97, 2164 (2014).10.1111/jace.12939 ↗
21. G.H. Chen and Y. Yang, J. Mater. Sci. Mater. Electron. 24, 1012 (2012).10.1007/s10854-012-0868-5 ↗
22. Y.D. Hou, M.K. Zhu, H. Wang, B. Wang, C.S. Tian, and H. Yan, J. Eur. Ceram. Soc. 24, 3731 (2004).10.1016/j.jeurceramsoc.2003.12.022 ↗
23. X. Chen, X. Ruan, K. Zhao, X. He, J. Zeng, and Y. Li, J. Alloys Compd. 632, 103 (2015).10.1016/j.jallcom.2015.01.088 ↗
24. Y.D. Hou, L.M. Chang, M.K. Zhu, X.M. Song, and H. Yan, J. Appl. Phys. 102, 084507 (2007).10.1063/1.2800264 ↗
25. J. Bian and Y. Ding, Mater. Res. Bull. 49, 245 (2014).
26. P. Wang, Y. Li, and Y. Lu, J. Eur. Ceram. Soc. 31, 2005 (2011).10.1016/j.jeurceramsoc.2011.04.023 ↗
27. X. Liu, M. Zhu, Z. Chen, B. Fang, J. Ding, and X. Zhao, J. Alloys Compd. 613, 219 (2014).10.1016/j.jallcom.2014.06.046 ↗
28. S.K. Ye, J.Y.H. Fuh, and L. Lu, Appl. Phys. Lett. 100, 1153 (2012).
29. V. Buscaglia, M.T. Buscaglia, M. Viviani, L. Mitoseriu, P. Nanni, and V. Trefiletti, J. Eur. Ceram. Soc. 26, 2889 (2006).10.1016/j.jeurceramsoc.2006.02.005 ↗
30. Z. Sun, L. Li, H. Zheng, S. Yu, and D. Xu, Ceram. Int. 41, 12158 (2015).10.1016/j.ceramint.2015.06.035 ↗