Low-Temperature Processing of PZT Thick Film by Seeding and High-Energy Ball Milling and Studies on Electrical Properties
Source abstract
Abstract
Lead zirconate titanate thick film with molecular formula PbZr0.52Ti0.42O3 (PZT) was prepared by a modified conventional sol–gel method through seeding and high-energy ball milling, resulting in perovskite phase formation at lower temperatures. The ball-milling time was optimized by keeping the seed particle loading (5 wt.%) constant in the sol–gel solution. This methodology helped in reduction of the crystalline phase formation temperature to 300°C, which is much lower than that reported in the literature (450°C). The well-established perovskite phase was confirmed by x-ray diffraction (XRD) analysis. Scanning electron microscopy (SEM) of PZT films revealed uniform and crystalline microstructure. Film prepared by this methodology showed higher spontaneous polarization (2.22 μC/cm2), higher capacitance (1.17 nF), and low leakage current density (18 μA/cm2). The results obtained from ferroelectric characterization showed a strong correlation with the XRD and SEM results.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Dielectric materials and actuators · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. H. Kueppers, T. Leueres, U. Schnakenberg, W. Mokwa, M. Hoffmann, T. Schneller, U. Boettger, and R. Waser, Sens. Actuators A 97, 680 (2002).10.1016/S0924-4247(01)00850-0 ↗
2. Z. Wang, J. Miao, and W. Zhu, J. Eur. Ceram. Soc. 27, 3759 (2007).10.1016/j.jeurceramsoc.2007.02.067 ↗
3. D.L. Corker, Q. Zhang, R.W. Whatmore, and C. Perrin, J. Eur. Ceram. Soc. 22, 383 (2002).10.1016/S0955-2219(01)00260-6 ↗
4. S.K. Pandey, A.R. James, R. Raman, S.N. Chatterjee, A. Goyal, C. Prakash, and T.C. Goel, Phys. B 369, 135 (2005).10.1016/j.physb.2005.08.024 ↗
5. F. Tyholdt, R.A. Dorey, R. Bredesen, and H. Raeder, J. Electroceram. 19, 315 (2007).10.1007/s10832-007-9318-9 ↗
6. G. Jian, H. Qingxian, L. Sheng, D. Zhou, and F. Qiuyun, Proc. Appl. Ceram. 6, 215 (2012).10.2298/PAC1204215J ↗
7. M. Dietze and M. Es-Souni, Sens. Actuators A. 143, 329 (2008).10.1016/j.sna.2007.11.016 ↗
8. Y.-H. Chu, C.-W. Liang, S.-J. Lin, K.-S. Liu, and I.-N. Lin, Jpn. J. Appl. Phys. 43, 5409 (2004).
9. M. Lebedev, J. Akedo, and Y. Akiyama, Jpn. J. Appl. Phys. 39, 5600 (2000).10.1143/JJAP.39.5600 ↗
10. J. Akedo and M. Lebedev, Jpn. J. Appl. Phys. 40, 5528 (2001).10.1143/JJAP.40.5528 ↗
11. C.-C. Chou, S.-D. Tsai, W.-H. Tu, Y.-E. Yeh-Liu, and H.-L. Tsai, J. Sol-Gel Sci. Technol. 42, 315 (2007).10.1007/s10971-007-0768-y ↗
12. Z.J. Wang, Z.P. Cao, Y. Otsuka, N. Yoshikawa, H. Kokawa, and S. Taniguchi, Appl. Phys. Lett. 92, 222905 (2008).10.1063/1.2938876 ↗
13. M. Ferrari, V. Ferrari, M. Guizzetti, and D. Marioli, Sensors and Microsystems: AISEM 2009 Proceedings. Lecture Notes in Electrical Engineering, Vol. 54. doi: 10.1007/978-90-481-3606-3_12 .10.1007/978-90-481-3606-3_12 ↗
14. D.A. Barrow, T.E. Petroff, and M. Sayer, Surf. Coat. Technol. 76, 113 (1995).10.1016/0257-8972(95)02562-6 ↗
15. D.A. Barrow, T.E. Petroff, R.P. Tandon, and M. Sayer, J. Appl. Phys. 81, 876 (1997).10.1063/1.364172 ↗
16. Y.Z. Chen., J. Ma, L.B. Kong, and R.F. Zhang. Mater. Chem. Phys. 75, 225 (2005).
17. X.G. Tang, A.L. Ding, Y. Ye, and W.X. Chen, Thin Solid Films 423, 13 (2003).10.1016/S0040-6090(02)00504-7 ↗
18. A. Bardaine, P. Boy, P. Belleville, O. Acher, and F. Levassort, J. Eur. Ceram. Soc. 28, 1649 (2008).10.1016/j.jeurceramsoc.2007.10.014 ↗
19. X.N. Jiang, C. Sun, X. Zhang, B. Xu, and Y.H. Ye, Sens. Actuators A 87, 72 (2000).10.1016/S0924-4247(00)00467-2 ↗
20. B.G. Chae, Y.S. Yang, S.H. Lee, M.S. Jang, S.J. Lee, S.H. Kim, W.S. Baek, and S.C. Kwon, Thin Solid Films 410, 107 (2002).10.1016/S0040-6090(02)00254-7 ↗
21. Q.L. Zhao, M.S. Cao, J. Yuan, R. Lu, D.W. Wang, and D.Q. Zhang, Mater. Lett. 64, 632 (2010).10.1016/j.matlet.2009.12.028 ↗
22. L.N. Gao, S.N. Song, J.W. Zhai, X. Yao, and Z.K. Xu, J. Cryst. Growth 310, 1245 (2008).10.1016/j.jcrysgro.2007.12.015 ↗
23. L. Zhou, X.-F. Wang, Q. Han, J.-C. Wu, and Z.-Y. Li, Appl. Phys. Lett. 96, 063301 (2010).10.1063/1.3310023 ↗
24. S.H. Hu, G.J. Hu, X.J. Meng, G.S. Wang, J.L. Sun, S.L. Guo, J.H. Chu, and N. Dai, J. Cryst. Growth 260, 109 (2004).10.1016/S0022-0248(03)01592-6 ↗
25. B.A. Boukamp, M.T.N. Pham, D.H.A. Blan, and H.J.M. Bouwmeester, Solid State Ionics 170, 239 (2004).10.1016/j.ssi.2004.03.005 ↗