journal article·2001-09

Interfacial reactions between a Pb-Free solder and die backside metallizations

G. Ghosh, M. J. Pfeifer

Journal of Electronic Materials· Volume 30· Issue 9
Publisher page

Abstract

The interfacial reactions between Sn-3.0 Ag-0.7 Cu solder and backside metallizations on two semiconductor devices, field-effect transistors (FET) and diode, are studied. The metallizations on both devices were vacuum evaporated Ti/Ni/Ag. The intermetallic compounds (IMC) formed near the diode/solder and FET/solder joints during reflow, and the interdiffusion processes during solid state aging are characterized by the quantitative energy dispersive x-ray analysis and the x-ray mapping technique in a scanning electron microscope. Two different intermetallic compounds are found near the diode/solder interface. Both are in the form of particles, not a continuous layer, and are referred to as IMC-I and IMC-II. IMC-I corresponds to Ni3Sn4, with Cu atoms residing on the Ni sublattice. It is uncertain whether IMC-II is Cu6Sn5 or a Cu-Ni-Sn ternary phase. Near the as-reflowed FET/solder interface, both isolated scallops and a skeleton-like layer of Ni3Sn4 are observed. The primary microstructural dynamics during solid-state aging are the coarsening of IMCs and the reactions involving the Ni-and Ti-layer with Sn and Au. While the reaction with the Ni-layer yields only Ni3Sn4 intermetallic, the reaction involving the Ti-layer suggests the formation of Ti-Sn and Au-Sn-Ti intermetallics. The latter is due to the diffusion of Au from the substrate side to the die side. It is postulated that the kinetics of the Au-Sn-Ti layer is primarily governed by the diffusion of Au through the Ni3Sn4 layer by a grain boundary mechanism.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Intermetallics and Advanced Alloy Properties · Metallurgical and Alloy Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (11)

Show source-provided references
1. H.N. Keller, IEEE Trans. CHMT 9, 433 (1986).
2. S.K. Kang, R.S. Rai and S. Purushothaman, J. Electron. Mater. 25, 1113, (1996).10.1007/BF02659912 ↗
3. P.G. Kim, J.W. Wang, T.Y. Lee, and K.N. Tu, J. Appl. Phys. 86, 6746 (1999).10.1063/1.371751 ↗
4. S. Bader, W. Gust, and H. Heiber, Acta Met. Mater. 43, 329 (1995).
5. S.K. Kang and V. Ramachandran, Scripta Met. 14, 421 (1980).10.1016/0036-9748(80)90338-5 ↗
6. W.K. Choi and H.M. Lee, J. Electron. Mater. 28, 1251 (1999).10.1007/s11664-999-0164-1 ↗
7. G. Ghosh, Acta Mater. 48, 3719 (2000).10.1016/S1359-6454(00)00165-8 ↗
8. G. Ghosh, J. Electron. Mater. 29, 1182 (2000).10.1007/s11664-000-0011-x ↗
9. G. Ghosh, J. Appl. Phys. 88, 6887 (2000).10.1063/1.1321791 ↗
10. W.G. Bader, Welding J., Research Suppl. 48, 551-s, (1969).
11. T.B. Massalski, P.R. Subramaniam, H. Okamoto, and L. Kacprzak, eds., Binary Alloy Phase Diagrams, 2nd ed., Vol. 1 (Materials Park, OH: ASM Int., 1990).