Effect of Pr3+ Addition on the Electrical Properties of 0.94(Bi0.5Na0.5)TiO3-0.06(Ba0.9Ca0.1)TiO3 Ceramic Obtained by Pechini Method
Source abstract
Abstract
Abstract The influence of Pr3+ addition on the structure and electrical properties of (Bi,Na)TiO3-(Ba,Ca)TiO3 solid solution was investigated. In this work, 0.94(Bi0.5−xNa0.5)TiO3-0.06(Ba0.9Ca0.1)TiO3:xPr3+ (BNBCT6:xPr) with x = 0, 0.1, 0.3, 0.5, and 0.7 mol% ceramics were prepared via a polymeric complex synthesis (Pechini method). Optimal sintering parameters were chosen in order to obtain dense ceramic microstructures. X-ray diffraction confirmed the presence of a perovskite-like structure in all the synthetized powders and sintered samples. As Pr3+ content increased, a large reduction in grain size was observed. BNBCT6:xPr ceramics showed a phase transition from the field-induced ferroelectric to the relaxor phase at ~ 110 °C and a local maximum around 250 °C. Dielectric permittivity was reduced as Pr3+ doping increased. For x = 0.5 mol%, maximum piezoelectric values (d33 = 115 pC/N, − d31 = 27 pC/N, kp = 25%, and kt = 34%) were obtained, while for x = 0.7 mol%, ferroelectric characteristics (Pr = 14 µC/cm2, and Ec = 34.7 kV/cm) were enhanced. Bulk conductivities extracted from the impedance spectra for BNBCT6:xPr were low, consistent with the insulating characteristic of (Bi,Na)TiO3. The achieved electrical properties suggest that BNBCT6:xPr ceramics are a potential candidate for energy transition applications.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Multiferroics and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. M.E. Villafuerte-Castrejón, E. Morán, A. Reyes-Montero, R. Vivar-Ocampo, J.A. Peña-Jiménez, S.O. Rea-López, and L. Pardo, Towards lead-free piezoceramics: facing a synthesis challenge. Materials 9, 21 (2016).10.3390/ma9010021 ↗
2. P.K. Panda and B. Sahoo, PZT to lead free piezo ceramics: a review. Ferroelectrics 474(1), 128 (2015).10.1080/00150193.2015.997146 ↗
3. X. Zhou, G. Xue, H. Luo, C.R. Bowen, and D. Zhang, Phase structure and properties of sodium bismuth titanate lead-free piezoelectric ceramics. Prog. Mater. Sci. 122, 100836 (2021).10.1016/j.pmatsci.2021.100836 ↗
4. R. Machado, V.B. dos Santos, D.A. Ochoa, E. Cerdeiras, L. Mestres, and J.E. García, Elastic, dielectric and electromechanical properties of (Bi0.5Na0.5)TiO3-BaTiO3 piezoceramics at the morphotropic phase boundary region. J. Alloys Compd. 690, 568 (2017).10.1016/j.jallcom.2016.08.116 ↗
5. L. Pardo, A. García, K. Brebøl, E. Mercadelli, and C. Galassi, Enhanced properties for ultrasonic transduction phase transitions and thermal depoling in 0.96(Bi0.5Na0.5)TiO3-0.04BaTiO3 submicrometre-structured ceramics. J. Phys. D 44, 335404 (2011).10.1088/0022-3727/44/33/335404 ↗
6. R. Vivar-Ocampo, L. Pardo, D. Ávila, E. Morán, A.M. González, L. Bucio, and M.E. Villafuerte-Castrejón, Piezoelectric ceramics of the (1–x)Bi0.50Na0.50TiO3-xBa0.90Ca0.10TiO3 lead-free solid solution: chemical shift of the morphotropic phase boundary, a case study for x=0.06. Materials 10, 736 (2017).10.3390/ma10070736 ↗
7. J. Canche-Tello, M.E. Montero-Cabrera, M.E. Fuentes-Montero, L. Pardo, H.E. Esparza-Ponce, H. Castillo-Michel, I. Castillo-Sandoval, J.M. Nápoles-Duarte, S.D. Juárez-Escamilla, and L.E. Fuentes-Cobas, Oxygen vacancy micrometric enrichment in high-performance lead-free piezoelectric ceramic (Bi0.5Na0.5)0.94Ba0.06TiO3: a synchrotron radiation study. J. Eur. Ceram. Soc. 39(4), 1020 (2019).10.1016/j.jeurceramsoc.2018.10.010 ↗
8. W. Jo, R. Ditmer, M. Acosta, J. Zang, C. Groh, E. Sapper, K. Wang, and J. Rödel, Giant electric-field-induced strains in lead-free ceramics for actuator applications—status and perspective. J. Electroceram. 29, 71 (2012).10.1007/s10832-012-9742-3 ↗
9. H. Simons, J.E. Daniels, J. Glaum, A.J. Studer, J.L. Jones, and M. Hoffman, Origin of large recoverable strain in 0.94(Bi0.5Na0.5)TiO3-0.06BaTiO3 near the ferroelectric-relaxor transition. Appl. Phys. Lett. 102(6), 062902 (2013).10.1063/1.4790285 ↗
10. C.M. Lau, X.W. Xu, and K.W. Kwok, Photoluminescence, ferroelectric, dielectric and piezoelectric properties of Er-doped BNT–BT multifunctional ceramics. Appl. Surf. Sci. 336, 314 (2015).10.1016/j.apsusc.2014.12.105 ↗
11. U. Chon and J.S. Shim, Ferroelectric properties and crystal structure of praseodymium-modified bismuth titanate. J. Appl. Phys. 93, 4769 (2003).10.1063/1.1561585 ↗
12. R.W. Wolfe and R.E. Newnham, Rare earth bismuth titanates. J. Electrochem. Soc. 116, 832 (1969).10.1149/1.2412072 ↗
13. Y. Zhang and J.F. Li, Review of chemical modification on potassium sodium niobate lead-free piezoelectrics. J. Mater. Chem. C 7, 4284 (2019).10.1039/C9TC00476A ↗
14. A. Deng and J. Wu, Enhanced strain and electrostrictive properties in lead-free BNT-based ceramics via rare earth doping. J. Materiomics 8(2), 401 (2022).10.1016/j.jmat.2021.08.002 ↗
15. A. Nesterović, J. Vukmirović, I. Stijepović, M. Milanović, B. Bajac, E. Tóth, Ž Cvejić, and V. Srdić, Structure and dielectric properties of (1-x)Bi0.5Na0.5TiO3–xBaTiO3 piezoceramics prepared using hydrothermally synthesized powders. R. Soc. Open Sci. 8, 202365 (2021).10.1098/rsos.202365 ↗
16. T. Schulz, V. Veerapandiyan, M. Deluca, and J. Töpfer, Synthesis and properties of lead-free BNT-BT-xCZ ceramics as high-temperature dielectrics. Mater. Res. Bull. 145, 111560 (2022).10.1016/j.materresbull.2021.111560 ↗
17. F. Yang, M. Li, L. Li, P. Wu, E. Pradal-Velázquez, and D.C. Sinclair, Defect chemistry and electrical properties of sodium bismuth titanate perovskite. J. Mater. Chem. A 6(13), 5234 (2018).10.1039/C7TA09245H ↗
18. A. Gadelmawla, K. Riess, J. Birkenstock, M. Hinterstein, K.G. Webber, and N.H. Khansur, Effect of varying Bi content on the temperature-dependent mechanical, dielectric, and structural properties of nominal Na1/2Bi1/2TiO3. J. Appl. Phys. 130, 185106 (2021).10.1063/5.0070594 ↗
19. T. Liu, H. Zhang, J. Zhou, A. Chang, and H. Jiang, Novel thermal-sensitive properties of NBT-BZT composites ceramics for high-temperature NTC thermistors. J. Am. Ceram. Soc. 103(1), 48 (2019).10.1111/jace.16774 ↗
20. F. Li, J. Zhai, B. Shen, X. Liu, K. Yang, Y. Zhang, P. Li, B. Liu, and H. Zeng, Influence of structural evolution on energy storage properties in Bi0.5Na0.5TiO3-SrTiO3-NaNbO3 lead-free ferroelectric ceramics. J. Appl. Phys. 121, 054103 (2017).10.1063/1.4975409 ↗
21. H. Qi and R. Zuo, Linear-like lead-free relaxor antiferroelectric (Bi0.5Na0.5)TiO3–NaNbO3 with giant energy-storage density/efficiency and super stability against temperature and frequency. J. Mater. Chem. A 7, 3971 (2019).10.1039/C8TA12232F ↗
22. M. Chandrasekhar, Y. Govinda Reddy, and P. Kumar, Dielectric, ferroelectric, and strain study of BNT-BT-BKT ceramics for actuator applications. J. Electron. Mater. 49, 7238 (2020).10.1007/s11664-020-08493-0 ↗
23. R. Kumari, N. Ahlawat, A. Agarwal, S. Sanghi, and M. Sindhu, Structural transformation and investigation of dielectric properties of Ca substituted (Na0.5Bi0.5)0.95−xBa0.05CaxTiO3 ceramics. J. Alloys Compd. 695, 3282 (2017).10.1016/j.jallcom.2016.11.200 ↗
24. M. Acosta, J. Zang, W. Jo, and J. Rödel, High-temperature dielectrics in CaZrO3-modified Bi1/2Na1/2TiO3-based lead-free ceramics. J. Eur. Ceram. Soc. 32(16), 4327 (2012).10.1016/j.jeurceramsoc.2012.06.011 ↗
25. C. Alemany, A.M. González, L. Pardo, B. Jimenez, F. Carmona, and J. Mendiola, Automatic determination of complex constants of piezoelectric lossy materials in the radial mode. J. Phys. D. Appl. Phys. 28(5), 945 (1995).10.1088/0022-3727/28/5/017 ↗
26. Q. Xu, T. Li, H. Hao, S. Zhang, Z. Wang, M. Cao, Z. Yao, and H. Liu, Enhanced energy storage properties of NaNbO3 modified Bi0.5Na0.5TiO3 based ceramics. J. Eur. Ceram. Soc. 35(2), 545 (2015).10.1016/j.jeurceramsoc.2014.09.003 ↗
27. J. Zidani, M. Zannen, M. Hadouchi, H.A.H. Alzahrani, E. Birks, H. Khemakhem, M. Majdoub, M. El Marssi, and A. Lahmar, Structural, electrical and optical properties of lanthanide-doped Na0.4K0.1Bi0.5TiO3 ceramics. Phys. B Condens. Matter 653, 414680 (2023).10.1016/j.physb.2023.414680 ↗
28. M. Benyoussef, M. Zannen, J. Belhadi, B. Manoun, Z. Kutnjak, D. Vengust, M. Spreitzer, M. El Marssi, and A. Lahmar, Structural, dielectric, and ferroelectric properties of Na0.5(Bi1-xNdx)0.5TiO3 ceramics for energy storage and electrocaloric applications. Ceram. Int. 47(18), 26539 (2021).10.1016/j.ceramint.2021.06.068 ↗
29. Y. Liu, Y. Lu, and S. Dai, Hydrothermal synthesis of monosized Bi0.5Na0.5TiO3 spherical particles under low alkaline solution concentration. J. Alloys Compd. 484, 801 (2009).10.1016/j.jallcom.2009.05.033 ↗
30. M. Vögler, N. Novak, F.H. Shader, and J. Rödel, Temperature-dependent volume fraction of polar nanoregions in lead-free (1-x)(Bi0.5Na0.5)TiO3-xBaTiO3 ceramics. Phys. Rev. B 95, 024104 (2017).10.1103/PhysRevB.95.024104 ↗
31. W. Jo, S. Schaab, E. Sapper, L.A. Schmitt, H.-J. Kleebe, A.J. Bell, and J. Rödel, On the phase identity and its thermal evolution of lead free (Bi1/2Na1/2)TiO3-6 mol% BaTiO3. J. Appl. Phys. 110, 074106 (2011).10.1063/1.3645054 ↗
32. D. Lin and K.W. Kwok, Structure, ferroelectric, and piezoelectric properties of (Bi0.5Na0.5)1−x−y−z(Bi0.5K0.5)xBaySrzTiO3 lead-free ceramics. J. Am. Ceram. Soc. 93(3), 806 (2010).10.1111/j.1551-2916.2009.03473.x ↗
33. A. Reyes-Montero, F. Rubio-Marcos, L.E. Fuentes-Cobas, A. Del Campo, R. Castañeda-Guzmán, M.E. Villafuerte-Castrejón, and L. Pardo, Confocal Raman microscopy, synchrotron X-ray diffraction, and photoacoustic study of Ba0.85Ca0.15Ti0.90Zr0.10O3: understanding structural and microstructural response to the electric field. ACS Appl. Electron. Mater. 3(7), 2966 (2021).10.1021/acsaelm.1c00103 ↗
34. A. Reyes-Montero, L. Pardo, A. García, A.M. González, and M.E. Villafuerte-Castrejón, Ba1-xCaxTi0.90Zr0.10O3 shear properties and their frequency dependence determined from ceramic plates by an effective method for resonance decoupling. J. Alloys Compd. 806, 428 (2019).10.1016/j.jallcom.2019.07.210 ↗
35. Q. Yao, F. Wang, C. Jin, Y. Tang, T. Wang, and W. Shi, Piezoelectric/photoluminescence effects in rare-earth doped lead-free ceramics. Appl. Phys. A 113, 231 (2013).10.1007/s00339-012-7524-z ↗
36. J. Yang, P. Liu, X. Bian, H. Jing, Y. Wang, Y. Zhang, Y. Wu, and W. Song, Dielectric, ferroelectric and piezoelectric properties of Bi0.5Na0.5TiO3–(Ba0.7Ca0.3)TiO3 ceramics at morphotropic phase boundary composition. Mater. Sci. Eng. B 176, 260 (2011).10.1016/j.mseb.2010.12.007 ↗
37. F. Yang, J.S. Dean, Q. Hu, P. Wu, E. Pradal-Velázquez, and D.C. Sinclair, From insulator to oxide-ion conductor by a synergistic effect from defect chemistry and microstructure: acceptor-doped Bi-excess sodium bismuth titanate Na0.5Bi0.51TiO3.015. J. Mater. Chem. A 8, 25120 (2020).10.1039/D0TA10071D ↗
38. Y. An, C. He, C. Deng, Z. Chen, H. Chen, T. Wu, Y. Lu, X. Gu, J. Wang, Y. Liu, and Z. Li, Poling effect on optical and dielectric properties of Pr3+-doped Na0.5Bi0.5TiO3 ferroelectric single crystal. Ceram. Int. 46(4), 4664 (2020).10.1016/j.ceramint.2019.10.197 ↗
39. T. Yamatoh, H. Fujimori, and M. Arimura, Polymerizable complex synthesis of lead-free ferroelectric Na0.5Bi0.5TiO3 suppressing evaporation of sodium and bismuth. J. Ceram. Soc. Jpn. 123, 978 (2015).10.2109/jcersj2.123.978 ↗