Fabrication by Annealing at Approximately 1030°C and Electrical Characterization of Lead-Free (1 − x)Bi0.5K0.5TiO3–xBa(Fe0.5Nb0.5)0.05Ti0.95O3 Piezoelectric Ceramics
Source abstract
Abstract
Sintered (1 − x)Bi0.5K0.5TiO3–xBa(Fe0.5Nb0.5)0.05Ti0.95O3 [(1 − x)BKT–xBFNT] piezoelectric ceramics have been fabricated by conventional annealing at 1000°C to 1050°C. X-ray diffraction (XRD) analysis revealed that the 0.9BKT–0.1BFNT ceramic sintered at 1030°C showed high transition temperature of TC = 514°C due to presence of Bi4Ti3O12 in solid solution. Although the P–E ferroelectric loop was not yet saturated, the remanent polarization and coercive electric field of the 0.9BKT–0.1BFNT showed good values of Pr = 18.5 μC/cm2 and Ec = 4.3 kV/cm, respectively. The piezoelectric parameters of the ceramic included planar-mode electromechanical coupling factor of kp = 0.17 and mechanical quality factor of Qm = 145, larger than the values of 0.17 and 57, respectively, obtained for BKT ceramic.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Multiferroics and related materials · Dielectric properties of ceramics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. B. Jafe, W. Cook, and H. Jafe, eds., Piezoelectric Ceramics (New York: Academic, 1971).
2. Y. Xu, Ferroelectric Materials and Their Applications (Amsterdam: Elsevier Science, 1991).
3. N.T. Tho, A. Inoue, M. Noda, and M. Okuyama, IEEE Trans. Ultrason. Ferroelectr. Freq. Control 54, 2603 (2007).10.1109/TUFFC.2007.586 ↗
4. L. Simon-Seveyrat, A. Hajjaji, Y. Emziane, B. Guiffard, and D. Guyomar, Ceram. Int. 33, 35 (2007).10.1016/j.ceramint.2005.07.019 ↗
5. C.F. Buhrer, J. Chem. Phys. 36, 798 (1962).10.1063/1.1732613 ↗
6. K. Tabuchi, H. Nagata, and T. Takenaka, J. Ceram. Soc. Jpn. 121, 623 (2013).10.2109/jcersj2.121.623 ↗
7. J. König, M. Spreitzer, B. Jancar, D. Suvorov, Z. Samardzija, and A. Popovic, J. Eur. Ceram. Soc. 29, 1695 (2009).10.1016/j.jeurceramsoc.2008.10.002 ↗
8. T. Wada, A. Fukui, and Y. Matsuo, Jpn. J. Appl. Phys. 41, 7025 (2002).10.1143/JJAP.41.7025 ↗
9. H. Takahashi, Y. Numamoto, J. Tani, K. Matsuta, J. Qiu, and S. Tsurekawa, Jpn. J. Appl. Phys. 45, L30 (2006).10.1143/JJAP.45.L30 ↗
10. M.M. Vijatovic, J.D. Bobic, and B.D. Stojanovic, Sci. Sinter. 40, 235 (2008).10.2298/SOS0803235V ↗
11. W.R. Buessem and M. Kahn, J. Am. Ceram. Soc. 54, 458 (1971).10.1111/j.1151-2916.1971.tb12385.x ↗
12. E.V. Ramana, S.M. Yang, R. Jung, M.H. Jung, B.W. Lee, and C.U. Jung, J. Appl. Phys. 113, 187219 (2013).10.1063/1.4801965 ↗
13. H. Shulman, D. Damjanovic, and N. Setter, J. Am. Ceram. Soc. 83, 528 (2000).10.1111/j.1151-2916.2000.tb01229.x ↗
14. X.Q. Chen, F.J. Yang, W.Q. Cao, H. Wang, C.P. Yang, D.Y. Wang, and K. Chen, Solid State Commun. 150, 1221 (2010).10.1016/j.ssc.2010.04.002 ↗
15. K. Fukai, K. Hidaka, M. Aoki, and K. Abe, Ceram. Int. 16, 285 (1990).10.1016/0272-8842(90)90041-D ↗
16. G. Arlt, D. Henningsand, and G. deWith, J. Appl. Phys. 58, 1619 (1985).10.1063/1.336051 ↗
17. H. Bea, M. Bibes, A. Barthelemy, K. Bouzehouane, E. Jacquet, A. Khodan, J.P. Contour, S. Fusil, F. Wyczisk, A. Forget, D. Lebeugle, D. Colson, and M. Viret, Appl. Phys. Lett. 87, 072508 (2005).10.1063/1.2009808 ↗
18. N. Truong Tho, T. Kanashima, and M. Okuyama, Jpn. J. Appl. Phys. 49, 095803 (2010).10.1143/JJAP.49.095803 ↗
19. N. Truong Tho, T. Kanashima, M. Sohgawa, D. Ricinschi, M. Noda, and M. Okuyama, Jpn. J. Appl. Phys. 49, 5 (2010).10.1143/JJAP.49.095803 ↗
20. IRE Standards on Piezoelectric, IEEE Standard 179-1961 (New York: Institute of Electrical and Electronic Engineers, 1961).