High-Insulating Nature Induced by the Effect of Nickel Doping in (Ba0.7La0.3)(Ti1−xNix)O3 Ceramics
Source abstract
Abstract
As a lead-free ceramic, lanthanum-modified barium titanate (BLT) has attracted significant attention among researchers in recent years due to its interesting ferroelectric and piezoelectric properties and insulating behavior, which can be improved by the doping effect. For that, (Ba0.7La0.3) (Ti1−xNix)O3 (where x = 0%, 1%, 3%, 5%, 7% or 10%), denoted as BLTNx, were synthesized via the sol-gel process. The effect of the divalent ion Ni2+ on the structural, microstructural and dielectric properties was investigated by x-ray diffraction (XRD) and Fourier transform infrared (FTIR), Raman, and impedance spectroscopy (IS). Surface morphology analysis is done by scanning electronic microscopy (SEM). Dielectric properties were determined in the ranges 28°C to 400°C and 1 kHz to 2 MHz. The results showed that a low doping amount of Ni (x < 5%) increases the dielectric constant. The sample with x = 5% exhibited, at 400°C, a relatively high dielectric constant (ɛ′ = 2202), the sample with x = 3% exhibited, at 100°C, low dielectric loss (tan(δ) = 0.009), and high insulating character, indicating a suitable material for multilayer ceramic capacitors (MLCCs) and energy storage.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Multiferroics and related materials · Microwave Dielectric Ceramics Synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. J. Rödel, K.G. Webber, R. Dittmer, W. Jo, M. Kimura, and D. Damjanovic, Transferring leadfree piezoelectric ceramics into application J. Eur. Ceram. Soc. 35, 1659 (2015). https://doi.org/10.1016/j.jeurceramsoc.2014.12.013.10.1016/j.jeurceramsoc.2014.12.013 ↗
2. D.F.K. Hennings, B.S. Schrenemacher, and H. Schrenemacher, Solid-state preparation of BaTiO3 based dielectrics, using ultrafine raw materials J. Am. Ceram. Soc. 84, 2777 (2001). https://doi.org/10.1111/j.1151-2916.2001.tb01094.x.10.1111/j.1151-2916.2001.tb01094.x ↗
3. M. Acosta, N. Novak, V. Rojas, S. Patel, R. Vaish, J. Koruza, G.A. Rossetti, and J. Rödel, BaTiO3-based piezoelectrics: fundamentals, current status, and perspectives Appl. Phys. Rev. 4, 041305 (2017). https://doi.org/10.1063/1.4990046.10.1063/1.4990046 ↗
4. Y. Luo, X. Liu, X. Li, and J. Cheng, PTCR behaviour of Ba2LaBiO6-doped BaTiO3 ceramics J. Alloys Compd. 452, 397 (2008). https://doi.org/10.1016/j.jallcom.2006.11.011.10.1016/j.jallcom.2006.11.011 ↗
5. G. Li, X. Kuang, S. Tian, F. Liao, X. Jing, Y. Uesu, and K. Kohn, Structure and conductivity of perovskites Sr1−xLaxTi1−xCrxO3 J. Solid State Chem. 165, 381 (2002). https://doi.org/10.1006/jssc.2002.9561.10.1006/jssc.2002.9561 ↗
6. A. Salhi, S. Sayouri, B. Jaber, and L.H. Omari, Effect of microwaves on the synthesis, structural and dielectric properties of Ca-modified BaTiO3 ceramics Appl. Phys. A 124, 389 (2018). https://doi.org/10.1007/s00339-018-1794-z.10.1007/s00339-018-1794-z ↗
7. O. Prakash, H.S. Tewari, L. Pandey, R. Kumar, and D. Kumar, Preparation, structure, and dielectric properties of the system Ba1−xLaxTi1−xNixO3 J. Am. Ceram. Soc. 72, 1520 (1989). https://doi.org/10.1111/j.1151-2916.1989.tb07695.x.10.1111/j.1151-2916.1989.tb07695.x ↗
8. K.-T. Kim, and C.-I. Kim, The effect of Cr doping on the microstructural and dielectric properties of (Ba0.6Sr0.4)TiO3 thin films Thin Solid Films 472, 26 (2005). https://doi.org/10.1016/j.tsf.2004.05.128.10.1016/j.tsf.2004.05.128 ↗
9. F.D. Morrison, D.C. Sinclair, and A.R. West, Doping mechanisms and electrical properties of La-doped BaTiO3 ceramics Int. J. Inorg. Mater. 3, 1205 (2001). https://doi.org/10.1016/S1466-6049(01)00128-3.10.1016/S1466-6049(01)00128-3 ↗
10. M. Ganguly, S.K. Rout, T.P. Sinha, S.K. Sharma, H.Y. Park, C.W. Ahn, and I.W. Kim, Characterization and rietveld refinement of A-site deficient lanthanum doped barium titanate J. Alloys Compd. 579, 473 (2013). https://doi.org/10.1016/j.jallcom.2013.06.104.10.1016/j.jallcom.2013.06.104 ↗
11. S. Saparjya, S. Behera, T. Badapanda, R. Padhee, and P.R. Das, Effects of La3+ addition on the phase transition, microstructure, and electrical properties of Ba0.85Ca0.15Zr0.1Ti0.9O3 ceramics J. Mater. Sci.: Mater. Electron. 31, 8116 (2020). https://doi.org/10.1007/s10854-020-03352-4.10.1007/s10854-020-03352-4 ↗
12. A. El Ghandouri, S. Sayouri, T. Lamcharfi, and A. Elbasset, Structural, microstructural and dielectric properties of Ba1–xLaxTi(1–x/4)O3 prepared by sol gel method J. Adv. Dielect. 9, 1950026 (2019). https://doi.org/10.1142/S2010135X19500267.10.1142/S2010135X19500267 ↗
13. A. Nfissi, Y. Ababou, M. Belhajji, S. Sayouri, and T. Lamcharfi, Structural and dielectric properties of sol–gel processed Ce-doped BaTi0.97Y0.03O3 ceramics J. Adv. Dielect. 11, 2150003 (2021). https://doi.org/10.1142/S2010135X2150003x.10.1142/S2010135X2150003x ↗
14. Y.C. Huang, S.S. Chen, and W.H. Tuan, Process window of BaTiO3–Ni ferroelectric-ferromagnetic composites J. Am. Ceram. Soc. 90, 1438 (2007). https://doi.org/10.1111/j.1551-2916.2007.01624.x.10.1111/j.1551-2916.2007.01624.x ↗
15. S.K. Das, R.N. Mishra, and B.K. Roul, Magnetic and ferroelectric properties of Ni doped BaTiO3 Solid State Commun. 191, 19 (2014). https://doi.org/10.1016/j.ssc.2014.04.001.10.1016/j.ssc.2014.04.001 ↗
16. Y.C. Huang, and W.H. Tuan, Exaggerated grain growth in Ni-doped BaTiO3 ceramics Mater. Chem. Phys. 105, 320 (2007). https://doi.org/10.1016/j.matchemphys.2007.04.075.10.1016/j.matchemphys.2007.04.075 ↗
17. P.T. Phong, B.T. Huy, Y.-I. Lee, and I.-J. Lee, Polymorphs and dielectric properties of BaTi1−xNixO3 J. Alloys Compd. 583, 237 (2014). https://doi.org/10.1016/j.jallcom.2013.08.190.10.1016/j.jallcom.2013.08.190 ↗
18. J.A. Dawson, C.L. Freeman, J.H. Harding, and D.C. Sinclair, Phase stabilization of hexagonal barium titanate doped with transition metals: a computational study J. Solid State Chem. 200, 310 (2013). https://doi.org/10.1016/j.jssc.2013.01.043.10.1016/j.jssc.2013.01.043 ↗
19. N. Sharma, A. Gaur, U.K. Gaur, and R.K. Kotnala, Multiferroicity in Ba0.97La0.03Ti1−xNixO3 (0.03 ≤ x ≤ 0.07) ceramics J. Alloys Compd. 615, 135 (2014). https://doi.org/10.1016/j.jallcom.2014.06.147.10.1016/j.jallcom.2014.06.147 ↗
20. Y. Kumar, M.-A. Mohiddon, A. Srivastava, and K.L. Yadav, Effect of Ni doping on structural and dielectric properties of BaTiO3 Indian J. Eng. Mater. Sci. 16, 390 (2009).
21. L. Radonjić, M. Todorović, and J. Miladinović, Structural evolution of nanostructured barium titanate thin film sol–gel derived J. Sol-Gel Sci. Technol. 45, 125 (2008). https://doi.org/10.1007/s10971-007-1664-1.10.1007/s10971-007-1664-1 ↗
22. M.B. Chamekh, Z.B. Achour, A. Thamri, R. Chtourou, E. Dhahri, and O. Touayar, Structural and electrical characterization of strontium doped barium titanate for radiometric measurement Chem. Phys. Lett. 761, 138008 (2020). https://doi.org/10.1016/j.cplett.2020.138008.10.1016/j.cplett.2020.138008 ↗
23. N.P. Samantray, and R.N.P. Choudhary, Studies of structural, dielectric and impedance spectroscopy of Ca/Zr modified BiFeO3 ceramics Mater. Chem. Phys. 260, 124115 (2021). https://doi.org/10.1016/j.matchemphys.2020.124115.10.1016/j.matchemphys.2020.124115 ↗
24. S. Fabbiyola, V. Sailaja, L. John Kennedy, M. Bououdina, and J. Judith Vijaya, Optical and magnetic properties of Ni-doped ZnO nanoparticles J. Alloys Compd. 694, 522 (2017). https://doi.org/10.1016/j.jallcom.2016.10.022.10.1016/j.jallcom.2016.10.022 ↗
25. R. Ravanamma, K.M. Reddy, K.V. Krishnaiah, and N. Ravi, Structure and morphology of yttrium doped barium titanate ceramics for multi-layer capacitor applications Mater. Today: Proc. 46, 259 (2021). https://doi.org/10.1016/j.matpr.2020.07.646.10.1016/j.matpr.2020.07.646 ↗
26. V. Kavitha, J. Mayandi, P. Mahalingam, and N. Sethupathi, Structural, optical and electrical studies on zinc doped barium strontium titanate as photo-anode for DSSC device Mater. Today: Proc. 35, 48 (2021). https://doi.org/10.1016/j.matpr.2019.05.437.10.1016/j.matpr.2019.05.437 ↗
27. S. Vuttivong, S. Niemcharoen, P. Seeharaj, W.C. Vittayakorn, and N. Vittayakorn, Sonochemical synthesis of spherical BaTiO3 nanoparticles Ferroelectrics 457, 44 (2013). https://doi.org/10.1080/00150193.2013.847332.10.1080/00150193.2013.847332 ↗
28. V.S. Puli, D.K. Pradhan, W. Pérez, and R.S. Katiyar, Structure, dielectric tunability, thermal stability and diffuse phase transition behavior of lead free BZT–BCT ceramic capacitors J. Phys. Chem. Solids. 74, 466 (2013). https://doi.org/10.1016/j.jpcs.2012.11.012.10.1016/j.jpcs.2012.11.012 ↗
29. Y. Shiratori, C. Pithan, J. Dornseiffer, and R. Waser, Raman scattering studies on nanocrystalline BaTiO3 Part I – isolated particles and aggregates J. Raman Spectrosc. 38, 1288 (2007). https://doi.org/10.1002/jrs.1764.10.1002/jrs.1764 ↗
30. R. Kumar, K. Asokan, S. Patnaik, and B. Birajdar, Evolution of microstructure and relaxor ferroelectric properties in (LazBa1−z)(Ti0.80Sn0.20)O3 J. Alloys Compd. 687, 197 (2016). https://doi.org/10.1016/j.jallcom.2016.06.049.10.1016/j.jallcom.2016.06.049 ↗
31. Z. Deng, Y. Dai, W. Chen, X. Pei, and J. Liao, Synthesis and characterization of bowl-like single-crystalline BaTiO3 nanoparticles Nanoscale Res. Lett. 5, 1217 (2010). https://doi.org/10.1007/s11671-010-9629-7.10.1007/s11671-010-9629-7 ↗
32. B.D. Begg, K.S. Finnie, and E.R. Vance, Raman study of the relationship between room-temperature tetragonality and the curie point of barium titanate J. Am. Ceram. Soc. 79, 2666 (1996). https://doi.org/10.1111/j.1151-2916.1996.tb09032.x.10.1111/j.1151-2916.1996.tb09032.x ↗
33. S. Singh, P. Singh, O. Parkash, and D. Kumar, Structural and relaxor behavior of (Ba1−xLax)(Ti0.85Sn0.15)O3 ceramics obtained by solid state reaction J. Alloys Compd. 493, 522 (2010). https://doi.org/10.1016/j.jallcom.2009.12.148.10.1016/j.jallcom.2009.12.148 ↗
34. N. Baskaran, and H. Chang, Effect of Sn doping on the phase transformation properties of ferroelectric BaTiO3 J. Mater. Sci. Mater. Electron. 12, 527 (2001). https://doi.org/10.1023/A:1012453526652.10.1023/A:1012453526652 ↗
35. R.S. Devan, Y.D. Kolekar, and B.K. Chougule, Magnetoelectric effect and electrical properties in BTO + Ni0.93Co0.02Cu0.05Fe2O4 particulate composites J. Alloys Compd. 461, 678 (2008). https://doi.org/10.1016/j.jallcom.2007.07.087.10.1016/j.jallcom.2007.07.087 ↗
36. N. Kumari, V. Kumar, and S.K. Singh, Structural, dielectric and magnetic investigations on Al3+ substituted Zn-ferrospinels RSC Adv. 5, 37925 (2015). https://doi.org/10.1039/C5RA03745J.10.1039/C5RA03745J ↗
37. N. Singh, P. Kumar, A. Kumar, and S. Sharma, Dielectric relaxation, electrical conductivity and impedance response of barium titanate (BT) and strontium titanate (ST) doped Ba (Fe0.5Nb0.5)O3 ceramics J. Eng. Technol. Res. 4, 104 (2012). https://doi.org/10.5897/JETR12.002.10.5897/JETR12.002 ↗
38. M.S. Alkathy, and K.C.J. Raju, Structural, dielectric, electromechanical, piezoelectric, elastic and ferroelectric properties of lanthanum and sodium co-substituted barium titanate ceramics J. Alloys Compd. 737, 464 (2018). https://doi.org/10.1016/j.jallcom.2017.12.121.10.1016/j.jallcom.2017.12.121 ↗
39. Y. Wang, W. Rao, M. Wang, G. Li, Y. Li, J. Gao, W. Zhou, and J. Yu, Dielectric, ferromagnetic and ferroelectric properties of the (1–x)Ba0.8Sr0.2TiO3–xCoFe2O4 multiferroic particulate ceramic composites J. Mater. Sci. Mater. Electron. 23, 1064 (2012). https://doi.org/10.1007/s10854-011-0548-x.10.1007/s10854-011-0548-x ↗
40. M. Nadeem, M.J. Akhtar, A.Y. Khan, R. Shaheen, and M.N. Haque, AC study of 10% Fe-doped La0.65Ca0.35MnO3 material by impedance spectroscopy Chem. Phys. Lett. 366, 433 (2002). https://doi.org/10.1016/S0009-2614(02)01662-7.10.1016/S0009-2614(02)01662-7 ↗
41. K.S. Rao, P.M. Krishna, D.M. Prasad, T.S. Latha, and M. Hussain, Frequency dependent electrical characteristics of ferroelectric Pb4.0K1.0Li1.0Nb10O30 ceramics Eur. Phys. J. Appl. Phys. 39, 237 (2007). https://doi.org/10.1051/epjap:2007125.10.1051/epjap:2007125 ↗
42. C.L. Fan, D. Ciardullo, and W. Huebner, Synthesis of modified PbTiO3 powders and fibers by a liquid mix process Mater. Sci. Eng. B. 100, 1 (2003). https://doi.org/10.1016/S0921-5107(02)00405-1.10.1016/S0921-5107(02)00405-1 ↗
43. L.H. Omari, R. Moubah, A. Boutahar, L. Hajji, and R. El Ouatib, Analysis of electrical properties using complex impedance spectroscopy in solid solutions (PbTiO3)0.97-(LaFeO3)0.03 prepared by sol-gel technique J. Electroceram. 44, 23 (2020). https://doi.org/10.1007/s10832-020-00199-3.10.1007/s10832-020-00199-3 ↗
44. L.H. Omari, S. Sayouri, T. Lamcharfi, A. Yacoubi, K. Bouayad, and L. Hajji, Effect of Fe and/or La on the structural and dielectric properties of PbTiO3 Phys. Chem. News 43, 7 (2008).
45. O. Raymond, R. Font, N. Suárez-Almodovar, J. Portelles, and J.M. Siqueiros, Frequency-temperature response of ferro-electromagnetic Pb(Fe1∕2Nb1∕2)O3 ceramics obtained by different precursors. Part I. Structural and thermo-electrical characterization J. Appl. Phys. 97, 084108 (2005). https://doi.org/10.1063/1.1870099.10.1063/1.1870099 ↗