Effects of Bi2O3, TiO2, and Bi4Ti3O12 Seeding Layers on the Structural and Electrical Properties of Bi3.25La0.75Ti3O12 Thin Films Grown by a Sol–Gel Method
Source abstract
Abstract
Ferroelectric Bi3.25La0.75Ti3O12 (BLT) thin films with Bi2O3, TiO2, and Bi4 Ti3O12 (BTO) seeding layers were prepared on Pt/TiO2/SiO2/Si (100) substrate by a sol–gel technique. The effects of the different seeding layers on the structural and electrical properties of the BLT films were investigated. X-ray diffraction indicated that the predominant orientation of the BLT thin film on the BTO seeding layer was (117). Growth of films with the Pt/BLT/Bi2O3/Pt structure was oriented differently from that of films with the Pt/BLT/TiO2/Pt and Pt/BLT/Pt structures. In addition, in comparison with the BLT film deposited directly on Pt, the TiO2 layer substantially enhanced the leakage current resistance of the BLT film. The ferroelectric nature of the BLT thin film was substantially improved by use of a BTO seeding layer. In an applied field of 750 kV/cm, the remnant polarization (2P r) of the Pt/BLT/BTO/Pt capacitor was 61.5 μC/cm2. After 1010 switching cycles, 2P r of the BLT, BLT/Bi2O3, BLT/TiO2, and BLT/BTO films was degraded by approximately 13, 11, 1, and 2%, respectively, indicating that all the capacitors with the different seeding layers had good polarization fatigue characteristics.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Multiferroics and related materials · Acoustic Wave Resonator Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. J.F. Scott and C.A. Araujo, Science 246, 1400 (1989).10.1126/science.246.4936.1400 ↗
2. T. Mikolajick and C. Dehm, Microelectron. Reliab. 41, 947 (2001).10.1016/S0026-2714(01)00049-X ↗
3. B.H. Park and B.S. Kang, Nature 40, 682 (1999).10.1038/44352 ↗
4. T.W. Noh, B.S. Kang, and Y.W. So, J. Korean Phys. Soc. 39, 35 (2001).
5. A.Z. Simões and R.F. Pianno, J. Appl. Phys. 100, 084106 (2006).10.1063/1.2356096 ↗
6. J. Yu, B. Yang, and J. Li, J. Phys. D Appl. Phys. 41, 035304 (2008).10.1088/0022-3727/41/3/035304 ↗
7. Y.Y. Yao and C.H. Song, J. Appl. Phys. 95, 3126 (2004).10.1063/1.1649456 ↗
8. C.J. Lu, Y. Qiao, and Y.J. Qi, Appl. Phys. Lett. 87, 222901 (2005).10.1063/1.2135386 ↗
9. S. Yamauchi and M. Yoshimaru, Jpn. J. Appl. Phys. 35, 1553 (1996).10.1143/JJAP.35.1553 ↗
10. K. Aoki and Y. Fukuda, Jpn. J. Appl. Phys. 35, 2210 (1996).10.1143/JJAP.35.2210 ↗
11. S.T. Kim, H.H. Kim, M.Y. Lee, and W.J. Lee, Jpn. J. Appl. Phys. 36, 294 (1997).10.1143/JJAP.36.294 ↗
12. P. Muralt and T. Maeder, J. Appl. Phys. 83, 3835 (1998).10.1063/1.366614 ↗
13. Q. Wang and M. Shen, Thin Solid Films 473, 74 (2005).10.1016/j.tsf.2004.07.012 ↗
14. K.T. Kim and C. Kim, Thin Solid Films 447–448, 413 (2004).10.1016/S0040-6090(03)01117-9 ↗
15. J. Li, J. Yu, and G. Peng, J. Am. Ceram. Soc. 90, 3220 (2007).10.1111/j.1551-2916.2007.01880.x ↗
16. R. Bouregba, G. Poullain, and B. Vilquin, Mater. Res. Bull. 35, 1381 (2000).10.1016/S0025-5408(00)00354-8 ↗
17. Y.Y. Wu, D.M. Zhang, J. Yu, and Y.B. Wang, J. Appl. Phys. 105, 061613 (2009).10.1063/1.3055362 ↗
18. M.W. Chu, M. Ganne, and M.T. Caldes, Phys. Rev. B 61, 014102 (2003).10.1103/PhysRevB.68.014102 ↗
19. D.H. Bao, T.W. Chiu, and W. Naokiya, J. Appl. Phys. 93, 497 (2003).10.1063/1.1524708 ↗
20. M. Yamaguchi, T. Nagomoto, and O. Omoto, Thin Solid Films 300, 299 (1997).10.1016/S0040-6090(96)09456-4 ↗
21. Z. Chen and C. Yang, Mater. Lett. 60, 1559 (2006).10.1016/j.matlet.2005.11.075 ↗
22. Y. Sun, Y. Chen, and J. Gan, Appl. Phys. Lett. 81, 3221 (2002).10.1063/1.1516234 ↗
23. J.T. Dawley, R. Radspinner, B.J. Zelinski, and D.R. Uhlmann, J. Sol Gel Sci. Technol. 20, 85 (2001).10.1023/A:1008780701687 ↗
24. T. Hayashi, D. Togawa, and W. Sakamoto, J. Eur. Ceram. Soc. 24, 1621 (2004).10.1016/S0955-2219(03)00395-9 ↗
25. A.Z. Simões, A. Ries, F.M. Filho, J.A. Varela, and E. Longo, Appl. Phys. Lett. 85, 5962 (2004).10.1063/1.1834999 ↗
26. S. Ren, C. Lu, and J. Liu, Phys. Rev. B 54, R14337 (1996).10.1103/PhysRevB.54.R14337 ↗
27. M. Nagata, D.P. Vijay, X. Zhang, and S.B. Desu, Phys. Status. Solidi. A 157, 75 (1996).10.1002/pssa.2211570110 ↗
28. H.N. Lee, D. Hesse, and N. Zakharov, Science 296, 2006 (2002).10.1126/science.1069958 ↗
29. Y. Sun, Y. Chen, J. Gan, and J. Hwang, Jpn. J. Appl. Phys. 41, L892 (2002).10.1143/JJAP.41.L892 ↗
30. W. Li, K. Chen, and Y. Yao, Appl. Phys. Lett. 85, 4717 (2004).10.1063/1.1823583 ↗
31. H. Watanabe, T. Mihara, H. Yoshimori, and C.A. Araujo, Jpn. J. Appl. Phys. 34, 5240 (1995).10.1143/JJAP.34.5240 ↗
32. M.M. Kumar and Z.G. Ye, J. Appl. Phys. 90, 934 (2001).10.1063/1.1383267 ↗
33. H.N. Lee and D. Hesse, Appl. Phys. Lett. 80, 1040 (2002).10.1063/1.1447321 ↗
34. K.T. Kim and C.I. Kim, Surf. Coat. Tech. 177–178, 770 (2004).10.1016/j.surfcoat.2003.08.020 ↗
35. W. Shin and S. Yoon, Appl. Phys. Lett. 79, 1519 (2001).10.1063/1.1400077 ↗
36. H.N. Al-Shareef, B.A. Tuttle, and W.L. Warren, J. Appl. Phys. 79, 1013 (1996).10.1063/1.360888 ↗
37. C.A. Araujo, J.D. Cuchlaro, L.D. Mcmillan, M.C. Scott, and J.F. Scott, Nature 374, 627 (1995).10.1038/374627a0 ↗