journal article·2016-12

Pd and Au Contacts to SnS: Thermodynamic Predictions and Annealing Study

Ramya L. Gurunathan, Joseph Nasr, Jacob J. Cordell, Rona A. Banai, Michael Abraham, Kayla A. Cooley, Mark Horn, Suzanne E. Mohney

Journal of Electronic Materials· Volume 45· Issue 12
Publisher page

Abstract

Tin(II) sulfide (SnS) is emerging as an attractive p-type absorber layer material for thin film photovoltaics, which motivates the search for Ohmic, low-resistance contacts for SnS. In this study, Pd and Au contacts were prepared on sputter-deposited SnS films and electrically characterized both as-deposited and after annealing of the contacts. Ternary phase diagrams were also calculated to help predict whether the chosen metals would react with the SnS film. Pd was expected to react with the SnS film, while Au was expected to be in thermodynamic equilibrium. The Pd contacts appeared reactive, and their resistance was minimized with post-deposition annealing at 400°C, while the Au contacts showed little change upon annealing and remained unreactive.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Semiconductor materials and interfaces · Quantum Dots Synthesis And Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. P. Sinsermsuksakul, L. Sun, S. Lee, H. Park, S. Kim, C. Yang, and R. Gordon, Adv. Energy Mater. 4, 15 (2014)10.1002/aenm.201400496 ↗
2. R. Banai, H. Lee, M. Lewinsohn, M. Motyka, R. Chandrasekharan, N. Podraza, J. Brownson, and M. Horn, in IEEE 39th Photovolt. Specialists Conference (PVSC) (2013)
3. J. Andrade-Arvizu, M. Courel-Piedrahita, and O. Vigil-Galán, J. Mater. Sci. Mater. Electron. 26, 7 (2015)10.1007/s10854-015-3050-z ↗
4. M. Patel, and A. Ray, A.C.S. Appl, Mater. Interfaces 6, 13 (2014)
5. O. Vigil-Galán, M. Courel, J. Andrade-Arvizu, Y. Sánchez, M. Espíndola-Rodrguez, E. Saucedo, D. Seuret-Jiménez, and M. Titsworth, J. Mater. Sci. Mater. Electron. 26, 8 (2014)
6. B. Ghosh, M. Das, P. Banerjee, and S. Das, Solid State Sci. 11, 461 (2009)10.1016/j.solidstatesciences.2008.09.007 ↗
7. N. Reddy, M. Devika, and K. Gunasekhar, Thin Solid Films 558, 326–329 (2014)10.1016/j.tsf.2014.02.083 ↗
8. M. Devika, N. Reddy, F. Patolsky, and K. Gunasekhar, J. Appl. Phys. 104, 12 (2008)10.1063/1.3041622 ↗
9. M. Sheah, Kaye & Laby: Tables␣of Physical & Chemical Constants. (National Physical Laboratory, 2015) http://www.kayelaby.npl.co.uk/ . Accessed 25 May 2016
10. R.C. Sharma, and Y.A. Chang, Bull. Alloy Phase Diagr. 7, 269 (1986)10.1007/BF02869004 ↗
11. H. Okamoto, Binary Alloy Phase Diagrams, Chap Pd-Sn (Palladium-Tin) (Materials Park, ASM International, 1990)
12. H. Okamoto, J. Phase Equilib. 13, 106 (1992)10.1007/BF02645396 ↗
13. V. Grolier, and R. Schmid-Fetzer, Int. J. Mater. Res. 98, 797 (2007)10.3139/146.101544 ↗
14. H. Okamoto, and T.B. Massalski, Bull. Alloy Phase Diagr. 6, 518 (1985)10.1007/BF02887147 ↗
15. F. Boer, Cohesion in Metals (North Holland, Amsterdam, 1996), p. 720–746
16. O. Kubaschewski, C. Alcock, and P. Spencer, Materials Thermochemistry (Pergamon Press, Oxford, 1993)
17. H. Gamsajäger, T. Gajda, J. Sangster, S. Saxena, and W. Voigt, Chemical Thermodynamics of Tin, vol. 12 (OECD Publishing, Paris, 2012), pp. 209–224
18. G. Ghosh, J. Mater. Res. 23, 5 (2008)10.1557/JMR.2008.0175 ↗
19. R. Banai, Ph.D. dissertation, The Pennsylvania State University, University Park, PA, 2015
20. J. Nasr, Master’s thesis, The Pennsylvania State University, University Park, PA, 2016