Laser Drilling and Conducting Film Formation of Vias in Silicon
Source abstract
Abstract
Smaller vias are required to connect interlayers in semiconductor devices, glass interposers, and printed circuit boards. However, plating metals on the inner walls of these fine holes is becoming difficult. We demonstrate that laser illumination of stacked materials results in laser drilling and spontaneous coating of the inner surface. This process drilled through the upper materials of the stack and then evaporated the lower material, which re-deposited on the inner surface of the upper materials. Laser illumination of samples composed of stacked borosilicate glass, silicon, and copper formed vias with diameters of ∼15 μm in the silicon wafer (thickness of 100 μm) and spontaneously deposited the copper film on the inner surface. We observed the inner surfaces of the drilled holes in the silicon wafer with a field-emission scanning electron microscope equipped with an energy-dispersive x-ray spectroscope accessory. The conductivity of the vias was ∼100 Ω. We expect that, by changing the lower material, various materials could be deposited on the upper material, making this technique useful in many applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Integrated Circuits and Semiconductor Failure Analysis · Laser Material Processing Techniques · 3D IC and TSV technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (11)
Show source-provided references
1. V.F. Pavlidis and E.G. Friedman, in Three-dimensional Integrated Circuit Design (Burlington: Morgan Kaufmann, 2008), pp. 56–59.
2. V. Sukumaran, Q. Chen, F. Liu, N. Kumbhat, T. Bandyopadhyay, H. Chan, S. Min, C. Nopper, V. Sundaram, and R. Tummala, in 2010 Electronic Components and Technology Conference (2010), p. 557.
3. H. Nakagawa, K. Ogawa, A. Kihara, and T. Hirogaki, J. Mater. Process. Technol. 191, 293 (2007).10.1016/j.jmatprotec.2007.03.025 ↗
4. I. Koiwa, Y. Wakuda, T. Suzuki, T. Tamura, A. Fujisaki, K. Koiwa, T. Yamada, S. Ando, and A. Matsuno, in 2009 Electronic Components and Technology Conference (2009), p. 879.
5. A. Kestenbaum, J.F. D’Amico, B.J. Blumenstock, and M.A. Deangelo, IEEE Trans. Compon. Hybrids Manuf. Technol. 13, 1990 (1055).
6. A. Luft, U. Franz, A. Emsermann, and J. Kaspar, Appl. Phys. A 63, 93 (1996).10.1007/BF01567635 ↗
7. S. Döring, T. Ullsperger, F. Heisler, S. Richter, A. Tünnermann, and S. Nolte, Phys. Proc. 41, 431 (2013).10.1016/j.phpro.2013.03.099 ↗
8. N. Morita, T. Watanabe, and Y. Yoshida, Appl. Phys. Lett. 54, 1974 (1989).10.1063/1.101188 ↗
9. J.K. Lumpp and S.D. Allen, IEEE Trans. Compon. Packag. Manuf. Technol. B 20, 241 (1997).10.1109/96.618223 ↗
10. H. Hidai, S. Matsusaka, A. Chiba, and N. Morita, Appl. Phys. A 120, 357 (2015).10.1007/s00339-015-9196-y ↗
11. F. Zhang, S. Wenham, and M.A. Green, IEEE Trans. Electron Devices 42, 144 (1995).10.1109/16.370024 ↗