Optimization of Nanoparticle Organic Photovoltaic Device Performance using SCAPS Software
Source abstract
Abstract
The fabrication of nanoparticle (NP) organic photovoltaic (OPV) solar cells has attracted great interest due to the possibility of controlling the morphology of the active layer and eliminating harmful solvents. However, NP OPV devices exhibit low efficiency compared with bulk heterojunction devices. The solar cell capacitance simulator (SCAPS) simulation package using a framework based on a one-dimensional drift–diffusion model is applied in the current work to improve the efficiency of NP OPV devices with a poly(3-hexylthiophene) (P3HT):phenyl C61 butyric acid methyl ester (PCBM) active layer. The optimization results confirm that the best thickness for the active layer is 100 nm to 120 nm and that the device reaches its highest performance in this thickness range but low efficiency for thicknesses above 120 nm. Changing the electron mobility (in the range of 1 × 10−3 cm2/V-s < µe < 1 × 10−4 cm2/V-s) is found to have no impact on the device efficiency, whereas the device performance is improved by 27% when the hole mobility is varied in this range (1 × 10−3 cm2/V-s < µh < 1 × 10−4 cm2/V-s). Additionally, the donor and acceptor density (ND and NA) are optimized, revealing that the best values of 1 × 1015 cm−3 and 1 × 1018 cm3, respectively, lead to an improvement in the device efficiency by about 60%. The current findings indicate that the performance of NP OPV devices can indeed be enhanced by optimizing the morphology of the active layer.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. E.K. Chiew, M. Yahaya, and A.P. Othman, Int. J. Comput. Mater. Sci. Eng. 01, 1250004 (2012).
2. S.B. Hacène, and T. Benouaz, Phys. Status Solidi 211, 862 (2014).10.1002/pssa.201330320 ↗
3. C.J. Brabec, S. Gowrisanker, J.J. Halls, D. Laird, S. Jia, and S.P. Williams, Adv. Mater. 22, 3839 (2010).10.1002/adma.200903697 ↗
4. B. Maennig, J. Drechsel, D. Gebeyehu, P. Simon, F. Kozlowski, A. Werner, F. Li, S. Grundmann, S. Sonntag, and M. Koch, Appl. Phys. A 79, 1 (2004).10.1007/s00339-003-2494-9 ↗
5. R. Søndergaard, M. Helgesen, M. Jørgensen, and F.C. Krebs, Adv. Energy Mater. 1, 68 (2011).10.1002/aenm.201000007 ↗
6. F.C. Krebs, Sol. Energy Mater. Sol. Cells 93, 394 (2009).10.1016/j.solmat.2008.10.004 ↗
7. E.J. Luber, and J.M. Buriak, ACS Nano 7, 4708 (2013).10.1021/nn402883g ↗
8. J.L. Delgado, P.-A. Bouit, S. Filippone, M.Á. Herranz, and N. Martín, Chem. Commun. 46, 4853 (2010).10.1039/c003088k ↗
9. N.S. Sariciftci, L. Smilowitz, A.J. Heeger, and F. Wudl, Science 258, 1474 (1992).10.1126/science.258.5087.1474 ↗
10. M.A. Green, Y. Hishikawa, W. Warta, E.D. Dunlop, D.H. Levi, J. Hohl-Ebinger, and A.W. Ho-Baillie, Prog. Photovolt. Res. Appl. 25, 668 (2017).10.1002/pip.2909 ↗
11. T. Kietzke, D. Neher, K. Landfester, R. Montenegro, R. Güntner, and U. Scherf, Nat. Mater. 2, 408 (2003).10.1038/nmat889 ↗
12. M.C. Scharber, and N.S. Sariciftci, Prog. Polym. Sci. 38, 1929 (2013).10.1016/j.progpolymsci.2013.05.001 ↗
13. A. Stapleton, B. Vaughan, B. Xue, E. Sesa, K. Burke, X. Zhou, G. Bryant, O. Werzer, A. Nelson, A.L. David Kilcoyne, L. Thomsen, E. Wanless, W. Belcher, and P. Dastoor, Solar Energy Mater. Sol. Cells 102, 114 (2012).10.1016/j.solmat.2012.03.016 ↗
14. A.M. Ruder, Ann. N. Y. Acad. Sci. 1076, 207 (2006).10.1196/annals.1371.050 ↗
15. E.M. Ward, P.A. Schulte, K. Straif, N.B. Hopf, J.C. Caldwell, T. Carreón, D.M. DeMarini, B.A. Fowler, B.D. Goldstein, and K. Hemminki, Environ. Health Perspect. 118, 1355 (2010).10.1289/ehp.0901828 ↗
16. K. Feron, S. Ulum, N.P. Holmes, A.L.D. Kilcoyne, W.J. Belcher, X. Zhou, C.J. Fell, and P.C. Dastoor, Appl. Phys. Lett. 103, 19 (2013).10.1063/1.4829152 ↗
17. M.F. Al-Mudhaffer, M.J. Griffith, K. Feron, N.C. Nicolaidis, N.A. Cooling, X. Zhou, J. Holdsworth, W.J. Belcher, and P.C. Dastoor, Sol. Energy Mater. Sol. Cells 175, 77 (2018).10.1016/j.solmat.2017.09.007 ↗
18. S.R. Forrest, MRS Bull. 30, 28 (2005).10.1557/mrs2005.5 ↗
19. M. Mandoc, L.J.A. Koster, and P.W. Blom, Appl. Phys. Lett. 90, 133504 (2007).10.1063/1.2711534 ↗
20. A. Wagenpfahl, C. Deibel, and V. Dyakonov, IEEE J. Sel. Top. Quantum Electron. 16, 1759 (2010).10.1109/JSTQE.2010.2042142 ↗
21. K.S. Nalwa, R.C. Mahadevapuram, and S. Chaudhary, Appl. Phys. Lett. 98, 50 (2011).10.1063/1.3560483 ↗
22. M. Burgelman (2019).10.5465/AMBPP.2019.11864abstract ↗
23. E.H. Rhoderick, IEE Proc. I Solid-State Electron Dev. 129, 1 (1982).10.1049/ip-i-1.1982.0001 ↗
24. E.K. Chiew, M. Yahaya and A. Othman, Presented at the Advanced Materials Research, 2013.
25. W. Theiss.
26. D. Wynands, M. Levichkova, K. Leo, C. Uhrich, G. Schwartz, D. Hildebrandt, M. Pfeiffer, and M. Riede, Appl. Phys. Lett. 97, 1 (2010).10.1063/1.3475766 ↗