Electrical Characterization Induced by Structural Modulation in␣(Ca0.28Ba0.72)2.5–0.5x (Na0.5K0.5) x Nb5O15 Ceramics
Source abstract
Abstract
(Ca0.28Ba0.72)2.5–0.5x (Na0.5K0.5) x Nb5O15 ceramics (CBNKN, 0.0 ≤ x ≤ 0.4) with ‘unfilled’ tungsten bronze structure were prepared by the conventional solid-state reaction method. Effects of alkalis-introducing concentration in A-sites on the microstructure, dielectric and ferroelectric properties were investigated in detail. Pure tungsten bronze structure could be obtained in all compositions according to the x-ray diffraction patterns. Raman spectroscopy results showed that co-introducing Na+ and K+ in A sites to decrease the structural vacancy could enhance the dielectric and ferroelectric properties, which was attributed to the stronger interaction inside NbO6 octahedron and large distortion degree of NbO6 polar unit. Traditional temperature dependence of dielectric characteristics and well-saturated ferroelectric hysteresis loops were observed for all CBNKN ceramics. The better comprehensive dielectric and ferroelectric properties were obtained at x = 0.2 due to the bigger distortion degree of NbO6 polar unit and the highest densification. Whereas higher alkalis-introducing concentration would deteriorate the physical and electrical properties due to the poor sintering behavior. In addition, the frequency dependence of e around transition temperature (T c) and the temperature dependence of ferroelectric properties were discussed to further clarify the relationship between composition and performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Multiferroics and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. J.G. Wu, D.Q. Xiao, and J.G. Zhu, Chem. Rev. 115, 2559 (2015).10.1021/cr5006809 ↗
2. X.P. Wang, J.G. Wu, D.Q. Xiao, J.G. Zhu, X.J. Cheng, T. Zheng, B.Y. Zhang, X.J. Lou, and X.J. Wang, J. Am. Chem. Soc. 136, 2905 (2014).10.1021/ja500076h ↗
3. W.L. Gao, H.J. Zhang, S.Q. Xia, B.B. Huang, D. Liu, J.Y. Wang, M.H. Jiang, L.M. Zheng, J.F. Wang, and C.J. Lu, Mater. Res. Bull. 45, 1209 (2010).10.1016/j.materresbull.2010.05.024 ↗
4. K. Chandramouli and R. Koduri, J. Mater. Sci. 44, 1793 (2009).10.1007/s10853-009-3265-6 ↗
5. J. Gardner and F.D. Morrison, Dalton Trans. 43, 11687 (2014).10.1039/C4DT00126E ↗
6. Y.J. Qi and C.J. Lu, Appl. Phys. Lett. 87, 082904 (2005).10.1063/1.2010614 ↗
7. X.K. Han, L.L. Wei, Z.P. Yang, and T. Zhang, Ceram. Int. 39, 4853 (2013).10.1016/j.ceramint.2012.11.078 ↗
8. M. Muehlberg and M. Burianek, J. Cryst. Growth 310, 2288 (2008).10.1016/j.jcrysgro.2007.12.023 ↗
9. C. Duran, G.L. Messing, and S. Trolier-Mckinstry, J. Electron. Mater. 37, 5041 (2002).
10. M. Said, T.S. Velayutham, W.C. Gan, and W.H. Abd Majid, Ceram. Int. 5, 7119 (2015).10.1016/j.ceramint.2015.02.023 ↗
11. H.Y. Lee and R. Freer, J. Appl. Phys. 81, 376 (1997).10.1063/1.364122 ↗
12. A. Torres-Pardo, R. Jiménez, J.M. González-Calbet, and E. Garcĺa-González, Inorg. Chem. 50, 12091 (2011).10.1021/ic2016098 ↗
13. K. Li, X.L. Zhu, X.Q. Liu, and X.M. Chen, Appl. Phys. Lett. 102, 112912 (2013).10.1063/1.4796135 ↗
14. L.L. Wei, Z.P. Yang, R. Gu, and H.M. Ren, J. Am. Ceram. Soc. 93, 1984 (2010).10.1111/j.1551-2916.2010.03684.x ↗
15. K. Li, X.L. Zhu, X.Q. Liu, and X.M. Chen, Appl. Phys. Lett. 101, 042906 (2012).10.1063/1.4739841 ↗
16. S. Lanfredi, C. Darie, F.S. Bellucci, C.V. Colin, and M.A.L. Nobre, Dalton Trans. 43, 10983 (2014).10.1039/C4DT00623B ↗
17. S. Lanfredi, M.A.L. Nobre, P.G.P. Moraes, and J. Matos, Ceram. Int. 7, 9525 (2014).10.1016/j.ceramint.2014.02.026 ↗
18. K. Lin, Y.C. Rong, H. Wu, Q.Z. Huang, L. You, Y. Ren, L.L. Fan, J. Chen, and X.R. Xing, Inorg. Chem. 53, 9174 (2014).10.1021/ic501189n ↗
19. K. Lin, H. Wu, F.F. Wang, Y.C. Rong, J. Chen, J.X. Deng, R.B. Yu, L. Fang, Q.Z. Huang, and X.R. Xing, Dalton Trans. 43, 7037 (2014).10.1039/C3DT53340A ↗
20. B. Yang, L.L. Wei, X.L. Chao, Z.M. Wang, and Z.P. Yang, J. Alloys Compd. 632, 268 (2015).
21. B. Yang, P. Yang, L.L. Wei, Z.M. Wang, Z.Y. Yang, X.L. Chao, and Z.P. Yang, Ceram. Int. 41, 13988 (2015).10.1016/j.ceramint.2015.07.011 ↗
22. Y.B. Yao and C.L. Mak, J. Alloys Compd. 544, 87 (2012).10.1016/j.jallcom.2012.07.038 ↗
23. N.N. Zhang, W.L. Gao, H.J. Zhang, X.B. Hu, J.Y. Wang, C.C. Santos, A.P. Ayala, and I. Guedes, Vib. Spectrosc. 58, 74 (2012).10.1016/j.vibspec.2011.10.001 ↗
24. Y.B. Yao, C.L. Mak, and B. Ploss, J. Eur. Ceram. Soc. 32, 4353 (2012).10.1016/j.jeurceramsoc.2012.07.034 ↗
25. B.N. Parida and P.R. Das, J. Alloys Compd. 585, 234 (2014).10.1016/j.jallcom.2013.09.170 ↗
26. Y. Zhi and A. Chen, J. Appl. Phys. 91, 794 (2002).10.1063/1.1421033 ↗
27. B.N. Parida, P.R. Das, R. Padhee, and R.N.P. Choudhary, J. Alloys Compd. 540, 267 (2012).10.1016/j.jallcom.2012.06.077 ↗
28. B. Jimenez, C. Alemany, J. Mendiola, and E. Maurer, J. Phys. Chem. Sol. 46, 1383 (1985).10.1016/0022-3697(85)90076-9 ↗
29. R. Padhee, P.R. Das, and B.N. Parida, J. Electron. Mater. 3, 426 (2013).10.1007/s11664-012-2376-z ↗
30. G.S. Gong, G. Zerihum, Y.J. Fang, S. Huang, C.Y. Yin, and S.L. Yuan, J. Am. Ceram. Soc. 98, 109 (2015).10.1111/jace.13256 ↗
31. L. Jin, F. Li, and S.J. Zhang, J. Am. Ceram. Soc. 97, 1 (2014).10.1111/jace.12773 ↗