journal article·2015-11

Effects of Electric Discharge Plasma Treatment on the Thermal Conductivity of Polymer–Metal Nitride/Carbide Composites

Levent Parali, Mirza A. Kurbanov, Azad A. Bayramov, Farida N. Tatardar, Ramazanova I. Sultanakhmedova, Huseynova Gulnara Xanlar

Journal of Electronic Materials· Volume 44· Issue 11
Publisher page

Abstract

High-density polymer composites with semiconductor or dielectric fillers such as aluminum nitride (AIN), aluminum oxide (Al2O3), titanium carbide (TiC), titanium nitride (TiN), boron nitride (BN), silicon nitride (Si3N4), and titanium carbonitride (TiCN) were prepared by the hot pressing method. Each powder phase of the composites was exposed to an electric discharge plasma process before composite formation. The effects of the electric discharge plasma process and the filler content (volume fraction) on the thermal conductivity, volt–ampere characteristics, thermally stimulated depolarization current, as well as electrical and mechanical strength were investigated. The results of the study indicate that, with increasing filler volume fraction, the thermal conductivity of the samples also increased. Furthermore, the thermal conductivity, and electrophysical and mechanical properties of the high-density polyethylene + 70% BN composite modified using the electric discharge plasma showed improvement when compared with that without electric discharge plasma treatment.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Dielectric materials and actuators · Advanced ceramic materials synthesis · High voltage insulation and dielectric phenomena

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. R.R. Tummala, J. Am. Ceram. Soc. 74, 895 (1991).10.1111/j.1151-2916.1991.tb04320.x ↗
2. S.Z. Yu, P. Hing, and X. Hu, J. Appl. Phys. 88, 398 (2000).10.1063/1.373672 ↗
3. Y. Zhou, H. Wang, L. Wang, K. Yu, Z. Lin, L. He, and Y. Bai, Mater. Sci. Eng. B 177, 892 (2012).10.1016/j.mseb.2012.03.056 ↗
4. S.H. Xie, B.K. Zhu, J.B. Li, X.Z. Wei, and Z.K. Xu, Polym. Test. 23, 797 (2004).10.1016/j.polymertesting.2004.03.005 ↗
5. P. Bujard, JP. Anserment, Proceeding Fifth IEEE SEMI-Therm Symposium, pp. 126–130 (1989).10.1109/STHERM.1989.76077 ↗
6. L. Li and D.D.L. Chung, J. Electron. Mater. 23, 557 (1994).10.1007/BF02670659 ↗
7. R.F. Hill, Proceedings of the Technical Program. National Symposium on Emerging Packing Technologies, pp. 125–131 (1996).
8. H. Ishida and S. Rimdst, Thermochim. Acta 320, 177 (1998).10.1016/S0040-6031(98)00463-8 ↗
9. H. Hatta, M. Taya, F.A. Kulacki, and J.F. Harder, J. Compos. Mater. 26, 2 (1992).10.1177/002199839202600501 ↗
10. M. Ohashi, S. Kawakami, and Y. Yokogawa, J. Am. Ceram. Soc. 88, 2615 (2005).10.1111/j.1551-2916.2005.00456.x ↗
11. S. Yu, P. Hing, and X. Hu, Compos. Part A Appl. Sci. 33, 289 (2002).10.1016/S1359-835X(01)00107-5 ↗
12. Q. Mu, S. Feng, and G. Diao, Polym. Compos. 28, 125 (2007).10.1002/pc.20276 ↗
13. J. Gu, Q. Zhang, J. Dang, J. Zhang, and Z. Yang, Polym. Eng. Sci. 49, 1030 (2009).10.1002/pen.21336 ↗
14. H. Zhou, S. Zhang, and M. Yang, Compos. Sci. Technol. 67, 1035 (2007).10.1016/j.compscitech.2006.06.004 ↗
15. G. Hass, M.H. Francombe, and R.W. Hoffman, Physics of Thin Films: Advances in Research and Development (New York: Academic, 1975), p. 359.
16. M.H. Brodsky, Amorphous Semiconductors, Topics in Applied Physics (New York: Springer, 1979), p. 419.
17. G. Harbeke, Polycrystalline Semiconductors, Physical Properties and Applications (Berlin: Springer, 1985), p. 341.10.1007/978-3-642-82441-8 ↗
18. W. Heywang, Amorphe und Polykristalline Halbleiter (Berlin: Springer, 1984), p. 160.10.1007/978-3-642-95447-4 ↗
19. G.M. Sessler, Electrets (Berlin: Springer, 1980), p. 486.10.1007/978-3-540-34846-7 ↗
20. M.K. Kerimov, M.A. Kurbanov, A.A. Bayramov, A.I. Mamedov, Nanocomposites and Polymers with Analytical Methods, 3rd ed. (INTECH Open Access Publisher, 2011), pp. 375–404.
21. B. Eliasson and U. Kogelschatz, IEEE Trans. Plasma Sci. 19, 309 (1991).10.1109/27.106829 ↗
22. B. Eliasson, W. Egli, and U. Kogelschatz, Pure Appl. Chem. 66, 1275 (1994).10.1351/pac199466061275 ↗
23. L. Paralı, J. Electrostat. 76, 89 (2015).10.1016/j.elstat.2015.05.012 ↗
24. B.S. Kolupaev, Relaxation and Thermal Properties of Filled Polymer Systems (Lviv: Vitsa School, 1980), p. 200.
25. A.G. Milnes and D.L. Feucht, Heterojunctions and Metal–Semiconductor Junctions (New York: Academic, 1970), p. 432.
26. E. Plyudemana, The Interface in Polymer Composite (Peace, Moscow, 1976), p. 299.
27. E.H. Roderick, Metal–Semiconductor Contact (Oxford: Clarendon, 1982), p. 208.
28. P.A. Tipler and G. Moscaj, Physics for Scientists and Engineers, 6th ed. (New York: Worth, 2008), p. 434.
29. A.S Freidin, R.A. Trusov, Properties and Calculation of Adhesive Joints (M. Chemistry, 1990), p. 255 (in Russia).
30. M. Razeghi, Technology of Quantum Devices (New York: Springer Science & Business Media, 2009), p. 321.
31. W.J. Brennan, J. Lowell, M.C. O’Neil, and M.P.W. Wilson, J. Phys. D Appl. Phys. 25, 1513 (1992).10.1088/0022-3727/25/10/018 ↗
32. N. Tsutsumi, Y. Ueda, and T. Kiyotsukuri, Polymer 33, 3305 (1992).10.1016/0032-3861(92)90253-S ↗
33. O. Engstom, S. Bengtssonn, J.G. Andersson, O.M. Andersson, and A. Jauhiainen, J. Electrochem. Soc. 139, 3638 (1992).10.1149/1.2069135 ↗
34. G. Varma, R. Singh, S.C. Datt, R. Singh, Proceeding 33rd Solid State Physics Symposium, vol. 33 (Bombay, 1991) p. 362.