Rapid Thermal Annealing for Solution Synthesis of Transparent Conducting Aluminum Zinc Oxide Thin Films
Source abstract
Abstract
Transparent conducting oxide films with optimized dopant molar ratio have been prepared with limited pre- and postdeposition annealing duration of 10 min. Multiple aluminum zinc oxide (AZO) layers were spin-coated on ordinary glass substrates. The predeposition consolidation temperature and dopant molar ratio were optimized for electrical conductivity and optical transparency. Next, a group of films were deposited on Corning glass substrates from precursor solutions with the optimized dopant ratio, followed by postdeposition rapid thermal annealing (RTA) at different temperatures and in controlled environments. The lowest resistivity of 10.1 × 10−3 Ω cm was obtained for films receiving RTA at 600°C for 10 min each in vacuum then in N2-5%H2 environment, while resistivity of 20.3 × 10−3 Ω cm was obtained for films subjected to RTA directly in N2-5%H2. Optical measurements revealed average total transmittance of about 85% in the visible region. A direct allowed transition bandgap was determined based on the absorption edge with a value slightly above 3.0 eV, within the typical range for semiconductors. RTA resulted in desorption of oxygen with enhanced carrier concentration and crystallinity, which increased the carrier mobility with decreased bulk resistivity while maintaining the required optical transparency.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: ZnO doping and properties · Semiconductor materials and devices · Gas Sensing Nanomaterials and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. D.S. Ginley and J.D. Perkins, in Handbook of Transparent Conductors, ed. D.S. Ginley (New York: Springer, 2010), pp. 1–25.10.1007/978-1-4419-1638-9_1 ↗
2. Ü. Özgür, D. Hofstetter, and H. Morkoc, Proc. IEEE 98, 1255 (2010).10.1109/JPROC.2010.2044550 ↗
3. F. Fumagalli, J. Marti-Rujas, and F. Di Fonzo, Thin Solid Films 569, 44 (2014).10.1016/j.tsf.2014.08.023 ↗
4. H.J. Cho, S.U. Lee, B. Hong, Y.D. Shin, J.Y. Ju, H.D. Kim, M. Park, and W.S. Choi, Thin Solid Films 518, 2941 (2010).10.1016/j.tsf.2009.10.130 ↗
5. Y.-C. Cheng, Appl. Surf. Sci. 258, 604 (2011).10.1016/j.apsusc.2011.07.124 ↗
6. P. Gondoni, M. Ghidelli, F. Di Fonzo, V. Russo, P. Bruno, J. Marti-Rujas, C.E. Bottani, A. Li Bassi, and C.S. Casari, Thin Solid Films 520, 4707 (2012).10.1016/j.tsf.2011.10.072 ↗
7. R.B.H. Tahar and N.B.H. Tahar, J. Mater. Sci. 40, 5285 (2005).10.1007/s10853-005-0522-1 ↗
8. V. Kumar, R.G. Singh, F. Singh, and L.P. Purohit, J. Alloys Compd. 544, 120 (2012).10.1016/j.jallcom.2012.07.124 ↗
9. K.Y. Cheong, N. Muti, and S.R. Ramanan, Thin Solid Films 410, 142 (2002).10.1016/S0040-6090(02)00286-9 ↗
10. C.-Y. Tsay, W. Chun-Wei, C.-M. Lie, F.-S. Chen, and C.-K. Lin, Thin Solid Films 519, 1516 (2010).10.1016/j.tsf.2010.08.170 ↗
11. E.J. Luna-Arredondo, A. Maldonado, R. Asomoza, D.R. Acosta, M.A. Meléndez-Lira, and M. de la L. Olvera, Thin Solid Films 490, 132 (2005).10.1016/j.tsf.2005.04.043 ↗
12. S.-Y. Lee and B.-O. Park, Thin Solid Films 484, 184 (2005).10.1016/j.tsf.2005.03.007 ↗
13. M.-C. Jun and J.-H. Koh, J. Electr. Eng. Technol. 8, 163 (2013).10.5370/JEET.2013.8.1.163 ↗
14. S.-Y. Kuo, W.-C. Chen, F.-I. Lai, C.-P. Cheng, H.-C. Kuo, S.-C. Wang, and W.-F. Hsieh, J. Cryst. Growth 287, 78 (2006).10.1016/j.jcrysgro.2005.10.047 ↗
15. J.-H. Lee and B.-O. Park, Thin Solid Films 426, 94 (2003).10.1016/S0040-6090(03)00014-2 ↗
16. M.-C. Jun and J.-H. Koh, J. Nanosci. Nanotechnol. 13, 3403 (2013).10.1166/jnn.2013.7314 ↗
17. V. Shelke, M.P. Bhole, and D.S. Patil, Mater. Chem. Phys. 141, 81 (2013).10.1016/j.matchemphys.2013.04.027 ↗
18. W.H. Hirschwald, Acc. Chem. Res. 18, 228 (1985).10.1021/ar00116a001 ↗
19. H. Tong, Z. Deng, Z. Liu, C. Huang, J. Huang, H. Lan, C. Wang, and Y. Cao, Appl. Surf. Sci. 257, 4906 (2011).10.1016/j.apsusc.2010.12.144 ↗
20. S. Major, A. Banerjee, and K.L. Chopra, Thin Solid Films 122, 31 (1984).10.1016/0040-6090(84)90376-6 ↗
21. H. Deng, J.J. Russell, R.N. Lamb, B. Jiang, Y. Li, and X.Y. Zhou, Thin Solid Films 458, 43 (2004).10.1016/j.tsf.2003.11.288 ↗
22. H. Wang, X. Mu-hui, X. Ji-wen, M.-f. Ren, and L. Yang, J. Mater. Sci. Mater. Electron. 21, 589 (2010).10.1007/s10854-009-9962-8 ↗
23. S. Ullah, F. De Matteis, R. Branquinho, E. Fortunato, R. Martins, and I. Davoli, IEEE 15th International Conference on Nanotechnology (IEEE-NANO) (Rome, 2015), p. 144.10.1109/NANO.2015.7388919 ↗
24. K.W. Liu, M. Sakurai, and M. Aono, J. Appl. Phys. 108, 043516 (2010).10.1063/1.3464229 ↗
25. M.S. Kim, K.G. Yim, S. Kim, G. Nam, D.-Y. Lee, J.S. Kim, J.S. Kim, and J.-Y. Lee, Acta Phys. Pol. A 121, 217 (2012).10.12693/APhysPolA.121.217 ↗
26. D.-K. Kim and H.B. Kim, Curr. Appl. Phys. 13, 2001 (2013).10.1016/j.cap.2013.08.008 ↗
27. E. Burstein, Phys. Rev. 93, 632 (1954).10.1103/PhysRev.93.632 ↗
28. J. Tauc, R. Grigorovici, and A. Vancu, Phys. Status Solidi 15, 627 (1966).10.1002/pssb.19660150224 ↗
29. S.K. Choi and J.I. Lee, J. Vac. Sci. Technol. A19, 2043 (2001).10.1116/1.1371326 ↗