Crystallographic Orientation Identification in Multicrystalline Silicon Wafers Using NIR Transmission Intensity
Source abstract
Abstract
Near-infrared (NIR) polariscopy is a technique used for the non-destructive evaluation of the in-plane stresses in photovoltaic silicon wafers. Accurate evaluation of these stresses requires correct identification of the stress-optic coefficient, a material property which relates photoelastic parameters to physical stresses. The material stress-optic coefficient of silicon varies with crystallographic orientation. This variation poses a unique problem when measuring stresses in multicrystalline silicon (mc-Si) wafers. This paper concludes that the crystallographic orientation of silicon can be estimated by measuring the transmission of NIR light through the material. The transmission of NIR light through monocrystalline wafers of known orientation were compared with the transmission of NIR light through various grains in mc-Si wafers. X-ray diffraction was then used to verify the relationship by obtaining the crystallographic orientations of these assorted mc-Si grains. Variation of transmission intensity for different crystallographic orientations is further explained by using planar atomic density. The relationship between transmission intensity and planar atomic density appears to be linear.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. K. Skenes, Ph.D. thesis, School of Mechanical Engineering, Georgia Institute of Technology (2014).
2. A. Kumar, K. Skenes, R.G.R. Prasath, C. Yang, S.N. Melkote, and S. Danyluk, in Proceedings of the 28th European Photovoltaic Solar Energy Conference and Exhibition, pp. 1474–1476 (2013).
3. A. Kumar, R.G.R. Prasath, V. Pogue, K. Skenes, C. Yang, S.N. Melkote, and S. Danyluk, Proc. Manuf. 5, 1382 (2016).
4. V. Ganapati, S. Schoenfelder, S. Castellanos, S. Oener, R. Koepge, A. Sampson, M. Marcus, B. Lai, H. Morhenn, G. Hahn, J. Bagdahn, and T. Buonassisi, J. Appl. Phys. (2010). https://doi.org/10.1063/1.3468404 .10.1063/1.3468404 ↗
5. A. Kumar, S.N. Melkote, S. Kaminski, and C. Arcona, J. Am. Ceram. Soc. 100, 1350 (2017).10.1111/jace.14732 ↗
6. A. Kumar, A. Kovalchenko, V. Pogue, E. Pashchenko, and S.N. Melkote, Proc. CIRP 45, 147 (2016).10.1016/j.procir.2016.02.341 ↗
7. A. Kumar, S.N. Melkote, S. Kaminski, and C. Arcona, in Proceedings of the 32nd European Photovoltaic Solar Energy Conference and Exhibition, pp. 1053–1056 (2016).
8. E. Cai, B. Tang, W.R. Fahrner, and L. Zhou, in Proceedings of the 26th European Photovoltaic Solar Energy Conference and Exhibition, pp. 1884–1886 (2011).
9. A. Kumar, S. Kaminski, S.N. Melkote, and C. Arcona, Wear 364, 163 (2016).10.1016/j.wear.2016.07.009 ↗
10. A. Kumar and S.N. Melkote, Appl. Phys. Lett. (2017). https://doi.org/10.1063/1.4991536 .10.1063/1.4991536 ↗
11. A. Kumar and S.N. Melkote, Proc. Manuf. 6, (in press) (2017).
12. D. Marshall and B.R. Lawn, J. Mater. Sci. 14, 2001 (1979).10.1007/BF00551043 ↗
13. A.S. Budiman, G. Illya, V. Handara, W.A. Caldwell, C. Bonelli, M. Kunz, N. Tamura, and D. Verstraeten, Sol. Energy Mater. Sol. Cells 130, 303 (2014).10.1016/j.solmat.2014.07.029 ↗
14. I. De Wolf, Semicond. Sci. Technol. 11, 139 (1996).10.1088/0268-1242/11/2/001 ↗
15. J. Lim, M. Ratnam, I. Azid, and D. Mutharasu, Exp. Mech. 50, 1051 (2010).10.1007/s11340-009-9307-9 ↗
16. S.K. Tippabhotla, I. Radchenko, K.N. Rengarajan, G. Illya, V. Handara, M. Kunz, N. Tamura, and A.S. Budiman, Proc. Eng. 139, 123 (2016).10.1016/j.proeng.2015.09.241 ↗
17. M.C. Brito, J.M. Alves, J.M. Serra, R.M. Gamboa, C. Pinto, and A.M. Vallera, Sol. Energy Mater. Sol. Cells 87, 311 (2005).10.1016/j.solmat.2004.07.028 ↗
18. A. Augusto, D. Pera, H.J. Choi, P. Bellanger, M.C. Brito, J. Maia Alves, A.M. Vallêra, T. Buonassisi, and J.M. Serra, J. Appl. Phys. (2013). https://doi.org/10.1063/1.4793319 .10.1063/1.4793319 ↗
19. S.K. Tippabhotla, I. Radchenko, W.J.R. Song, G. Illya, V. Handara, M. Kunz, N. Tamura, A.O. Tay, and A.S. Budiman, Prog. Photovolt. Res. Appl. 25, 791 (2017).10.1002/pip.2891 ↗
20. V.A. Handara, I. Radchenko, S.K. Tippabhotla, K.R. Narayanan, G. Illya, M. Kunz, N. Tamura, and A.S. Budiman, Sol. Energy Mater. Sol. Cells 162, 30 (2017).10.1016/j.solmat.2016.12.028 ↗
21. I. Radchenko, S. Tippabhotla, N. Tamura, and A. Budiman, J. Electron. Mater. 45, 6222 (2016).10.1007/s11664-016-5012-5 ↗
22. F. Jagailloux, V. Valle, J.C. Dupré, J.D. Penot, and A. Chabli, Strain 52, 355 (2016).10.1111/str.12185 ↗
23. S. He, T. Zheng, and S. Danyluk, J. Appl. Phys. 96, 3103 (2004).10.1063/1.1774259 ↗
24. K. Skenes, F. Li, and S. Danyluk, in Proceedings of the 26th European Photovoltaic Solar Energy Conference and Exhibition, pp. 2082–2085 (2011).
25. V. Ramakrishnan and K. Ramesh, Measurement 87, 13 (2016).10.1016/j.measurement.2016.03.014 ↗
26. K. Ramesh, Digital Photoelasticity, 1st ed. (Bristol: IOP Publishing, 2000), pp. 1–46.10.1007/978-3-642-59723-7 ↗
27. J. Dally and W. Riley, Experimental Stress Analysis, 1st ed. (New York: McGraw-Hill, Inc, 1965).
28. F. Li, Ph.D. thesis, School of Mechanical Engineering, Georgia Institute of Technology (2010).
29. A. Banerjee and D. Das, Appl. Surf. Sci. 330, 134 (2015).10.1016/j.apsusc.2014.12.177 ↗
30. V. Randle and O. Engler, Introduction to Texture Analysis: Macrotexture, Microtexture and Orientation Mapping, 2nd ed. (Boca Raton: CRC Press, 2009), pp. 153–189.
31. T. Lehmann, M. Trempa, E. Meissner, M. Zschorsch, C. Reimann, and J. Friedrich, Acta Mater. 69, 1 (2014).10.1016/j.actamat.2014.01.050 ↗
32. C.Y. Khoo, H. Liu, W.A. Sasangka, R.I. Made, N. Tamura, M. Kunz, A.S. Budiman, C.L. Gan, and C.V. Thompson, J. Mater. Sci. 51, 1864 (2016).10.1007/s10853-015-9493-z ↗
33. A.S. Budiman, G. Lee, M.J. Burek, D. Jang, S.M.J. Han, N. Tamura, M. Kunz, J.R. Greer, and T.Y. Tsui, Mater. Sci. Eng. A 538, 89 (2012).10.1016/j.msea.2012.01.017 ↗
34. A.S. Budiman, H.-A.-S. Shin, B.-J. Kim, S.-H. Hwang, H.-Y. Son, M.-S. Suh, Q.-H. Chung, K.-Y. Byun, N. Tamura, M. Kunz, and Y.-C. Joo, Microelectron. Reliab. 52, 530 (2012).10.1016/j.microrel.2011.10.016 ↗
35. M.J. Burek, A.S. Budiman, Z. Jahed, N. Tamura, M. Kunz, S. Jin, S.M.J. Han, G. Lee, C. Zamecnik, and T.Y. Tsui, Mater. Sci. Eng. A 528, 5822 (2011).10.1016/j.msea.2011.04.019 ↗
36. G. Lee, J.-Y. Kim, A.S. Budiman, N. Tamura, M. Kunz, K. Chen, M.J. Burek, J.R. Greer, and T.Y. Tsui, Acta Mater. 58, 1361 (2010).10.1016/j.actamat.2009.10.042 ↗
37. A.S. Budiman, W.D. Nix, N. Tamura, B.C. Valek, K. Gadre, J. Maiz, R. Spolenak, and J.R. Patel, Appl. Phys. Lett. 88, 233515 (2006).10.1063/1.2210451 ↗
38. K. Skenes, G. Prasath, and S. Danyluk, in Proceedings of the 39th IEEE Photovoltaic Specialist Conference, pp. 0519–0522 (2013).10.1109/PVSC.2013.6744203 ↗
39. W.H. Bragg and W.L. Bragg, in Proceedings of the Royal Society of London. Series A, Containing Papers of a Mathematical and Physics. Character 88, 428 (1913).10.1098/rspa.1913.0040 ↗
40. J. Schaffer, A. Saxena, S. Antolovich, T. Sanders, and S. Warner, The Science and Design of Engineering Materials, 2nd ed. (New York: McGraw-Hill Inc, 1999).