Study on the Thermoelectric Properties of CVD SiC Deposited with Inert Gases
Source abstract
Abstract
We deposited silicon carbide (SiC) by the chemical vapor deposition (CVD) method using the inert gases Ar and He. It was confirmed that SiC deposited with inert gases had a porous microstructure and high carbon content. We also studied the thermoelectric properties. SiC deposited with He gas had lower electrical and thermal conductivity compared with SiC deposited with Ar gas. Both samples using Ar and He exhibited a negative Seebeck coefficient, indicating n-type semiconductor behavior. The calculated figure of merit (Z) of SiC deposited with inert gases was improved compared with SiC deposited with H2 or N2 gas. The value for SiC deposited with He was higher than that for SiC deposited with Ar. The thermoelectric properties of porous silicon carbide deposited with inert gases were also compared with those of silicon carbide deposited with hydrogen or nitrogen gas.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon Carbide Semiconductor Technologies · Thermal properties of materials · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. H. Morkoc, S. Strite, G.B. Gao, M.E. Lin, B. Sverdlov, and M. Burns, J. Appl. Phys. 76, 1363 (1994).10.1063/1.358463 ↗
2. D.P. Stinton, T.M. Besmann, and R.A. Lowden, Ceram. Bull. 67, 350 (1988).
3. W.R. Haigis and M.A. Pickering, Mater. Des. 14, 130 (1992).10.1016/0261-3069(93)90007-I ↗
4. D.J. Cheng, W.J. Shyy, D.H. Kuo, and M.H. Hon, J. Electrochem. Soc. 134, 3145 (1987).10.1149/1.2100359 ↗
5. X. Ma and T. Sudarshan, J. Electron. Mater. 33, 450 (2004).10.1007/s11664-004-0201-z ↗
6. J.S. Goela, N.E. Brese, M.A. Pickering, and J.E. Graebner, Mater. Res. Soc. Bull. 26, 458 (2001).10.1557/mrs2001.116 ↗
7. J.S. Goela and R.L. Taylor, J. Mater. Sci. 23, 4331 (1988).10.1007/BF00551927 ↗
8. K. Niihara, Ceram. Bull. 63, 1160 (1984).
9. Hi. Ohta, S.W. Kim, Y. Mune, T. Mizoguchi, K. Nomura, S. Ohta, T. Nomura, Y. Nakanishi, Y. Ikuhara, M. Hirano, H. Hosono, and K. Koumoto, Nat. Mater. 6, 129 (2007).10.1038/nmat1821 ↗
10. T. Mori and T. Nishimura, J. Solid State Chem. 179, 2908 (2006).10.1016/j.jssc.2006.03.030 ↗
11. J.G. Kim, Y.Y. Choi, D.J. Choi, J.I. Kim, B.S. Kim, and S.M. Choi, J. Ceram. Soc. Jpn. 117, 574 (2009).10.2109/jcersj2.117.574 ↗
12. D.N. Lee, J. Mater. Sci. 24, 4375 (1989).10.1007/BF00544515 ↗
13. D.H. Kuo, D.J. Cheng, and W.J. Shyy, J. Electrochem. Soc. 137, 3688 (1990).10.1149/1.2086288 ↗
14. T.T. Lin and M.H. Hon, J. Mater. Sci. 30, 2675 (1995).10.1007/BF00362151 ↗
15. D. Lespiaux and F. Langlais, Thin Solid Films 265, 40 (1995).10.1016/0040-6090(95)06562-8 ↗
16. W. Wei, J.W. Li, H.T. Zhang, X.M. Cao, C. Tian, and J.S. Zhang, Scr. Mater. 57, 1081 (2007).10.1016/j.scriptamat.2007.08.036 ↗
17. M. Fujisawa, T. Hata, H. Kitagawa, P. Bronsveld, Y. Suzuki, K. Hasezaki, Y. Noda, and Y. Imamura, Renew. Energy 33, 309 (2008).10.1016/j.renene.2007.07.010 ↗
18. M. Masuda, H. Mabuchi, H. Tsuda, T. Matsui, and K. Mori, Mater. Sci. Forum 389, 763 (2002).10.4028/www.scientific.net/MSF.389-393.763 ↗
19. B. Suhlz, High Temp. High Press. 13, 649 (1981).