journal article·2020-10

Fatigue Crack Networks in the Die-Attach Joint of a Power Semiconductor Module During Power Cycling Testing and Effects of Test Parameters on the Joint Fatigue Life

Kosuke Hosoya, Yoshiharu Kariya, Hiroshige Sugimoto, Kuniaki Takahashi

Journal of Electronic Materials· Volume 49· Issue 10
Publisher page

Abstract

The fracture mechanisms of a Sn-Ag-Cu lead-free solder joint and the effects of test parameters on power cycling life were investigated. In this study, three levels of average temperature (348, 373 and 398 K), two levels of each of current on-and-off time (2 s/10 s and 5 s/22 s), and three levels of ΔTj (75, 100 and 125 K) were used. Because the thermal expansion of the die-attach material was restrained by Si, equibiaxial tensile and compressive creep deformation occurred during power cycling. This deformation generated fatigue cracks in the central part of the die-attach joint, and the cracks connected to each other, resulting in a fatigue crack network. The fracture occupied 70% or more of the die-attach area and was the dominant factor affecting the joint’s fatigue life. As ΔTj increased, the strain energy density in the central part increased, resulting in a decrease in fatigue life. Although the strain energy density at an average temperature of 398 K decreased by about 10% compared with that at an average temperature of 348 K, the fatigue life decreased to about 40% when the average temperature increased. Continuous dynamic recrystallization occurred during power cycling, leading to fatigue failure in high-energy grain boundaries. Since continuous dynamic recrystallization tended to occur more readily at higher temperatures, the fatigue life decreased with increasing average temperature, even for the same junction temperature range ΔTj. Moreover, the area of equibiaxial tensile and compressive creep deformation in the die-attach material became larger with increasing current on-and-off times. As a result, the fracture area under long current on-and-off time conditions was increased by about 25% in comparison with that under short current on-and-off time conditions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. IEC 60749-34. Semiconductor devices–Mechanical and climatic test methods–Part 34: Power cycling (2010).
2. JEITA ED-4701-600. Environmental and endurance test methods for semiconductor devices (Specific test for discrete semiconductors) (2013).
3. LV324. Qualification of power electronics modules for use in motor vehicle components, general requirements, test conditions and tests, supplier portal of BMW:GS 95035, VW:VW 82324 Group Standard, Daimler (2014).
4. K. Sung, N. Zommer, D. Feucht, and R. Heckel, IEEE Trans. Parts Hybrids Packag. 13, 318 (1977).10.1109/TPHP.1977.1135203 ↗
5. A. Morozumi, K. Yamada, T. Miyasaka, S. Sumi, and Y. Seki, IEEE Trans. Ind. Appl. 39, 665 (2003).10.1109/TIA.2003.810661 ↗
6. S. Hartmann, M. Bayer, D. Schneider, and L. Feller, in Proceeding of 2010 6th International Conference on Integrated Power Electronics Systems (CIPS2010), pp. 1–6 (2010).
7. Y. Tanaka, A. Fukumoto, K. Endo, M. Taya, K. Yamazaki, K. Nishikawa, in Proceeding of 22rd Symposium on Microjoining and Assembly Technology in Electronics, 22, pp. 135–140 (2016).
8. H. Sugimoto, Y. Kariya, R.Hanada, A. Fukumoto, Y. Ito and S. Soda, in 6th International Workshop on Low Temperature Bonding for 3D Integration (LTB-3D), IEEE, pp. 82–82 (2019).
9. H. Takahashi and Y. Kariya, in Proceeding of 23rd Symposium on Microjoining and Assembly Technology in Electronics (mate2017), pp. 217–222 (2017).
10. K. Hosoya and Y. Kariya, in Proceeding of Microelectronics Symposium 2018 (MES2018), pp. 81–84 (2018).10.1016/j.mejo.2018.09.010 ↗
11. Y. Kariya, Y. Niimi, T. Suga, and M. Otsuka, Mater. Trans. 46, 2309 (2005).10.2320/matertrans.46.2309 ↗
12. Y. Kariya and H. Kontani, in Proceeding of 7th International Conference on Low Cycle Fatigue (LCF7), pp. 465–470 (2013).
13. B. Zhou, T.R. Bieler, T.K. Lee, and K.C. Liu, J. Electron. Mater. 39, 2669 (2010).10.1007/s11664-010-1380-4 ↗
14. K. Huang and R.E. Logs, Mater. Design 111, 548 (2016).10.1016/j.matdes.2016.09.012 ↗
15. S. Gourdet and F. Montheillet, A model of continuous dynamic recrystallization. Acta Mater. 51, 2685 (2003).10.1016/S1359-6454(03)00078-8 ↗
16. D. Hardwick, C.M. Sellars, and W.J. McG Tegart, J. Inst. Metals. 90, 21 (1961).
17. T. Watanabe, Textures Microstruct. 20, 195 (1993).10.1155/TSM.20.195 ↗
18. S. Mukai, M. Sakane, M. Ohnami, and T. Ogata, J. Soc. Mat. Sci. 46, 1083 (1997).10.2472/jsms.46.1083 ↗
19. V. Mailot, A. Fissolo, G. Degallaix, and S. Degallaix, Int. J. Solids Struct. 42, 759 (2005).10.1016/j.ijsolstr.2004.06.032 ↗
20. M.F. Cipiere and J.A. Le Duff, Weld World. 46, 23 (2002).10.1007/BF03266362 ↗
21. M. Kamaya, S. Amine, and S. Taheri, Jpn. Soc. Mech. Eng. 75, 343 (2009).10.1299/kikaia.75.343 ↗
22. M.F. Ashby, C. Gandhi, and D.M.R. Taplin, Acta Metall. 27, 699 (1979).10.1016/0001-6160(79)90105-6 ↗
23. J. Dai, J. Li, P. Agyakwa, M. Corfield, and C.M. Johnson, IEEE Trans. Device Mater. Rel. 18, 256 (2018).10.1109/TDMR.2018.2825386 ↗
24. K.M. Jackson, Sens. Actuators A Physical 125, 34 (2005).10.1016/j.sna.2004.10.008 ↗
25. J.D. Morrow, ASTM STP 378, 45 (1964).
26. J.H. Pang, B.S. Xiong, and T.H. Low, Thin Solid Films 462, 408 (2004).10.1016/j.tsf.2004.05.037 ↗
27. S. Choi, K.N. Subramanian, J.P. Lucas, and T.R. Bieler, J. Elecron. Mater. 29, 1249 (2000).10.1007/s11664-000-0020-9 ↗
28. J.G. Lee, A. Telang, K.N. Subramanian, and T.R. Bieler, J. Electron. Mater. 31, 1152 (2002).10.1007/s11664-002-0004-z ↗
29. Y. Kariya and T. Suga, Fatigue Fracture Eng. Mater. Struct. 30, 413 (2007).10.1111/j.1460-2695.2006.01091.x ↗
30. J. Wareing, Metall. Trans. A 8, 711 (1977).10.1007/BF02664781 ↗
31. C.R. Brinkman, G.E. Korth, and R.R. Hobbins, Nuclear Technol. 16, 297 (1972).10.13182/NT72-A31195 ↗