journal article·2005-10

Growth and properties of digitally-alloyed AlGaInP by solid source molecular beam epitaxy

O. Kwon, Y. Lin, J. Boeckl, S. A. Ringel

Journal of Electronic Materials· Volume 34· Issue 10
Publisher page

Abstract

Digital alloying using molecular beam epitaxy (MBE) was investigated to produce AlGaInP quaternary alloys for bandgap engineering useful in 600-nm band optoelectronic device applications. Alternating Ga0.51In0.49P/Al0.51In0.49P periodic layers ranging from 4.4 monolayers (ML) to 22.4 ML were used to generate 4,000-A-thick (Al0.5Ga0.5)0.51In0.49P quaternary materials to understand material properties as a function of constituent superlattice layer thickness. High-resolution x-ray diffraction (XRD) analysis exhibited fine satellite peaks for all the samples confirming that digitally-alloyed (Al0.5Ga0.5)0.51In0.49P preserved high structural quality consistent with cross-sectional transmission electron microscopy (X-TEM) images. Low-temperature photoluminescence (PL) measurements showing a wide span of luminescence energies ∼ 170 meV can be obtained from a set of identical composition digitally-alloyed (Al0.5Ga0.5)0.51In0.49P with different superlattice periods, indicating the bandgap tunability of this approach and its viability for III-P optoelectronic devices grown by MBE.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor Quantum Structures and Devices · Semiconductor materials and devices · Quantum Dots Synthesis And Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. A.C. Chen, A.M. Moy, and K.Y. Cheng, J. Vac. Sci. Technol. B 13, 762 (1995).10.1116/1.588157 ↗
2. D.P. Bour, R.S. Geels, D.W. Treat, T.L. Paoli, F. Ponce, R.L. Thornton, B.S. Krusor, R.D. Bringans, and D.F. Welch, IEEE J. Quantum Electron. 30, 593 (1994).10.1109/3.283808 ↗
3. O. Blum, I.J. Fritz, L.R. Dawson, and T.J. Drummond, Electron. Lett. 31, 1247 (1995).10.1049/el:19950852 ↗
4. C.R. Bolognesi, J.D. Werking, E.J. Caine, H. Kroemer, and E.L. Hu, IEEE Electron Dev. Lett. 14, 13 (1993).10.1109/55.215085 ↗
5. J.G. Cody, D.L. Mathine, R. Droopad, G.N. Maracas, R. Rajesh, and R.W. Carpenter, J. Vac. Sci. Technol. B 12, 1075 (1994).10.1116/1.587091 ↗
6. W. Geisselbrecht, U. Pfeiffer, A. Thranhardt, U. Klutz, A.C. Gossard, and G.H. Dohler, J. Cryst. Growth 202, 163 (1999).10.1016/S0022-0248(98)01318-9 ↗
7. Y.G. Hong, A.Y. Egorov, and C.W. Tu, J. Vac. Sci. Technol. B 20, 1163 (2002).10.1116/1.1473175 ↗
8. R. Kaspi and G.P. Donati, J. Cryst. Growth 251, 515 (2003).10.1016/S0022-0248(02)02185-1 ↗
9. M.A. Khan, J.N. Kuznia, D.T. Olson, T. George, and W.T. Pike, Appl. Phys. Lett. 63, 3470 (1993).10.1063/1.110123 ↗
10. C. Mourad, D. Gianardi, K.J. Malloy, and R. Kaspi, J. Appl. Phys. 88, 5543 (2000).10.1063/1.1319967 ↗
11. P.G. Newman et al., J. Vac. Sci. Technol. B 18, 1619 (2000).10.1116/1.591439 ↗
12. D. Keith Bowen and Brian K. Tanner, High Resolution X-Ray Diffractometry and Topography (London: Taylor & Francis Ltd., 1998), pp. 141–142.10.1201/b12575 ↗
13. P.M. Peteroff, A.C. Gossard, W. Wiegmann, and A. Savage, J. Cryst. Growth 44, 5 (1978).10.1016/0022-0248(78)90321-4 ↗
14. C. Weisbuch, R. Dingle, A.C. Gossard, and W. Wiegmann, Solid State Comm. 38, 709 (1981).10.1016/0038-1098(81)90401-4 ↗
15. M. Shinohara, T. Ito, and Y. Imamura, J. Appl. Phys. 58, 3449 (1985).10.1063/1.335766 ↗
16. M. Levinshtein, S. Rumyantsev, and M. Shur, Handbook Series on Semiconductor Parameters Vol. 2 (Teaneck, NJ: World Scientific, 1999), pp. 57–59.
17. M.C. DeLong, D.J. Mowbray, R.A. Hogg, M.S. Skoinick, M. Hopkinson, J.P.R. David, P.C. Taylor, S.R. Krutz, and J.M. Olson, J. Appl. Phys. 73, 5163 (1993).10.1063/1.353792 ↗