Structural and Passivative Behaviors of Cu(In) Thin Film
Source abstract
Abstract
This investigation prepares a low-resistivity and self-passivated Cu(In) thin film. The dissociation behaviors of dilute Cu-alloy thin films, containing 1.5–5at.%In, were prepared on glass substrates by a cosputter deposition, and were subsequently annealed in the temperature range of 200–600 °C for 10–30 min. Thus, self-passivated Cu thin films in the form In2O3/Cu/SiO2 were obtained by annealing Cu(In) alloy films at an elevated temperature. Structural analysis indicated that only strong copper diffraction peaks were detected from the as-deposited film, and an In2O3 phase was formed on the surface of the film by annealing the film at an elevated temperature under oxygen ambient. The formation of In2O3/Cu/SiO2 improved the resistivity, adhesion to SiO2, and passivative capability of the studied film. A dramatic reduction in the resistivity of the film occurred at 500 °C, and was considered to be associated with preferential indium segregation during annealing, yielding a low resistivity below 2.92 μΩcm. The results of this study can be potentially exploited in the application of thin-film transistor–liquid crystal display gate electrodes and copper metallization in integrated circuits.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Copper Interconnects and Reliability · Surface and Thin Film Phenomena · Block Copolymer Self-Assembly
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. Takayama S., Tsutsui N., J Vac Sci Technol B 14, 3257 (1996)10.1116/1.588817 ↗
2. Arai T., Iiyori H., Hiromasu Y., Atsumi M., Ioku S., Furuta K., IBM J Res Develop 42, 491 (1998)10.1147/rd.423.0491 ↗
3. Iwamura E., Ohnishi T., Yoshikawa K., Itayama K., J Vac Sci Technol A 12, 2922 (1994)
4. Takayama S., Tsutsui N., J Vac Sci Technol A 14, 2499 (1996)10.1116/1.580009 ↗
5. Arai T., Makita A., Hiromasu Y., Takatsuji H., Thin Solid Films 383, 287 (2001)10.1016/S0040-6090(00)01794-6 ↗
6. Lee W.H., Cho B.S., Kang B.J., Yang H.J., Lee J.G., Appl Phys Lett 79, 3962 (2001)10.1063/1.1424062 ↗
7. Ding P.J., Lanford W.A., Appl Phys Lett 64, 2897 (1994)10.1063/1.111408 ↗
8. Ding P.J., Lanford W.A., Hymes S., Murarka S.P., J Appl Phys 75, 3627 (1994)10.1063/1.356075 ↗
9. Sirringhaus H., Theiss S.D., Kahn A., Wagner S., IEEE Electron Dev Lett 18, 388 (1997)10.1109/55.605448 ↗
10. Lee W.H., et al., J Electrochem Soc 147, 3066 (2000)10.1149/1.1393855 ↗
11. Lanford W.A., Ding P.J., Wang W., Hymes S., Muraka S.P., Thin Solid Films 262, 234 (1995)10.1016/0040-6090(95)05837-0 ↗
12. Choo K., Member J.J., IEEE Electron Dev Lett 23, 324 (2002)10.1109/LED.2002.1004223 ↗
13. Chae G.S., Soh H.S., J Appl Phys 90, 411 (2001)10.1063/1.1375021 ↗
14. Metals Handbook (Materials Park, OH: ASM Handbook Committee), vol. 8