HgCdTe mid-wavelength IR photovoltaic detectors fabricated using plasma induced junction technology
Source abstract
Abstract
Preliminary characterization results are presented for mid-wave infrared (MWIR) mercury cadmium telluride n-on-p photodiodes fabricated using a plasma induced type conversion junction formation technology. The diodes have been fabricated on three different vacancy doped p-type epitaxial starting materials, grown by liquid phase epitaxy (LPE) on CdZnTe, LPE on sapphire, and P/p isotype heterojunction material grown by molecular beam epitaxy (MBE) on CdZnTe. All materials had CdTe mole fraction in the active region of the device of ∼0.3. The process uses a H2/CH4 plasma generated in a parallel plate reactive ion etching (RIE) system to type convert the p-type material to n-type. The process is different from previously reported type conversion techniques in that it does not require a high temperature anneal, does not expose the junction at the surface to atmosphere after formation, and requires significantly fewer process steps than other planar processes. Homojunction devices fabricated using this process exhibit R0A values >107 Ω·cm2 at 80 K. The R0A is diffusion limited for temperatures >∼135 K. Results for responsivity, bias dependence of dynamic resistance — junction area product and 1/f noise show that the resulting diodes are comparable to the best planar diodes reported in the literature.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Semiconductor Detectors and Materials · Semiconductor Quantum Structures and Devices · Chalcogenide Semiconductor Thin Films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. L.T. Claiborne, Proc. SPIE 2999, 94, (1997).10.1117/12.271178 ↗
2. S.C. Chen, Microelectron. J. 25, 713 (1994).10.1016/0026-2692(94)90136-8 ↗
3. O.K. Wu, T.J. deLyon, R.D. Rajavel, and J. E. Jensen, Narrow-gap II–VI Comp. for Optoelectron. and Electromag. Appl., ed. P. Capper (London: Chapman and Hall, 1997), chapter 4.
4. P.S. Wijewarnasuriya et al., J. Electron. Mater. 27, 546 (1999).10.1007/s11664-998-0013-7 ↗
5. T.J. De Lyon et al., J. Electron. Mater. 27, 550 (1999).10.1007/s11664-998-0014-6 ↗
6. M.Z. Tidrow et al., Proc. SPIE 3553, 178 (1998).10.1117/12.318098 ↗
7. E. Belas, J. Franc, A. Toth, P. Moravec, R. Grill, H. Sitter, and P. Höschl, Semicon. Sci. Technol. 11, 1116 (1996).10.1088/0268-1242/11/7/024 ↗
8. L.O. Bubulac, W.E. Tennant, D.S. Lo, D.D. Edwall, J.C. Robinson, J.S. Chen, and G. Bostrup, J. Vac. Sci. Technol. A5, 3166 (1987).10.1116/1.574861 ↗
9. Y.-H. Kim, S.-H. Bae, H.C. Lee, D. Redfern, C.A. Musca, J.M. Dell, and L. Faraone, Proc. Conf. Optoelectron. Microelectron. Mater. Devs. 279 (1999).
10. J.K. White, C.A. Musca, H.C. Lee, and L. Faraone, submitted Appl. Phys. Lett.
11. R.M. Howard, Rev. Sci. Instrum. 70, 1860 (1999).10.1063/1.1149681 ↗
12. J. Bajaj, E.R. Blazejewski, G.M. Williams, R.E. DeWames, and M. Brown, J. Vac. Sci. Technol. B10, 1617 (1992).10.1116/1.586258 ↗
13. F.N. Hooge, Noise in Semicond. Mater. and Devices, ed. C. Claeys, G. Bosman, and E. Simoen (Leuven, Belgium: IMEC, 1993).
14. T.G.M. Kleinpenning, J. Vac. Sci. Technol. A3, 176 (1985).10.1116/1.573194 ↗