journal article·2026-01Open access

Green Synthesis Innovations and Robust Stabilization of Perovskite Quantum Dots for Sustainable High-Efficiency LED Technologies

Magda H. Abdellattif, Shaima Messa, Shaker Al-Hasnaawei, Subbulakshmi Ganesan, Ali Fawzi Al-Hussainy, Amanpreet Sandhu, Aashna Sinha

Journal of Electronic Materials· Volume 55· Issue 1

Abstract

Perovskite quantum dots (PQDs) are promising for next-generation light-emitting diodes (LEDs) owing to their high photoluminescence quantum yields (up to 97.64%) and tunable emission (360–710 nm). However, toxicity, instability, and scalability limit their use. This review explores green synthesis and stabilization strategies for sustainable PQD-based LEDs. Eco-friendly methods, such as ethyl acetate-based synthesis, tartaric acid-assisted reprecipitation, and solvent-free ball milling, achieve high PLQYs (e.g., 88.24% for CH 3 NH 3 PbBr 3 ) with low environmental impact. Lead-free PQDs, such as Cs 3 Bi 2 Br 9 , provide vibrant emission (400–560 nm) and stability for over 60 days. Stabilization techniques, including borophosphate glass encapsulation (94% photoluminescence (PL) retention after 240 h in water), silica coatings, and nontoxic ion doping (Mn 2+ , Bi 3+ ), improve resistance to moisture and heat. Hybrid approaches deliver external quantum efficiency (EQEs) up to 27.1% and operational lifetimes of 1001.1 min for CsPbI 3 LEDs. These enable wide-color-gamut displays (128% NTSC), deep-blue LEDs, flexible optoelectronics, and anticounterfeiting applications. Recycling strategies using recovered PbI 2 support circular economy principles. These advancements enhance commercial viability through scalable, cost-effective synthesis, positioning PQDs for eco-conscious optoelectronic applications.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Perovskite Materials and Applications · Luminescence Properties of Advanced Materials · Quantum Dots Synthesis And Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (92)

Show source-provided references
1. B. Xu, S. Yuan, L. Wang, X. Li, Z. Hu, and H. Zeng, Highly efficient blue light-emitting diodes enabled by gradient core/shell-structured perovskite quantum dots. ACS Nano 19, 1487 (2025).
2. X. Fan, X. Yang, X. Kong, T. Zhang, S. Wang, Y. Lin, and Z. Chen, Recent progresses on perovskite quantum dots patterning techniques for color conversion layer in micro-LED displays. Next Nanotechnol. 5, 100045 (2024).10.1016/j.nxnano.2024.100045 ↗
3. Z.S. Liu, Y. Wang, F. Zhao, H.H. Li, W.Z. Liu, W.S. Shen, H.W. Duan, Y.K. Wang, and L.S. Liao, Liquid bidentate ligand for full ligand coverage towards efficient near-infrared perovskite quantum dot LEDs. Light Sci. Appl. 14, 35 (2025).10.1038/s41377-024-01704-x ↗
4. Q. Zhang, D. Zhang, Z. Liao, Y.B. Cao, M. Kumar, S. Poddar, J. Han, Y. Hu, H. Lv, X. Mo, and A.K. Srivastava, Perovskite light-emitting diodes with quantum wires and nanorods. Adv. Mater. 37, 2405418 (2025).10.1002/adma.202405418 ↗
5. M. Que, Y. Xu, Q. Wu, J. Chen, L. Gao, and S.F. Liu, Application of advanced quantum dots in perovskite solar cells: synthesis, characterization, mechanism, and performance enhancement. Mater. Horiz. 12, 1001 (2025).10.1039/D4MH01478B ↗
6. Y. Duan, S. Li, K. Gu, Z. Kuang, J. Du, and J. Zhang, Four years of air exposure: passive surface chemical engineering to improve the stability and photoluminescence performance of CsPbBr3 perovskite quantum dot glass. Chem. Eng. J. 493, 164515 (2025).10.1016/j.cej.2025.164515 ↗
7. C. Mi, G.C. Gee, C.W. Lander, D. Shin, M.L. Atteberry, N.G. Akhmedov, L. Hidayatova, J.D. DiCenso, W.T. Yip, B. Chen, and Y. Shao, Towards non-blinking and photostable perovskite quantum dots. Nat. Commun. 16, 204 (2025).10.1038/s41467-024-55619-7 ↗
8. Y. Duan, K. Gu, S. Li, J. Du, and J. Zhang, Recent progress in CsPbX3 (X= Cl, Br, and I) perovskite quantum dot glasses: synthesis, matrix optimization, and photonic application potentials. Laser Photonics Rev. 19, 2402245 (2025).10.1002/lpor.202402245 ↗
9. X. Jia, D. Yang, D. Zheng, Z. Chang, J. Liu, L. Liu, L. Peng, Y. Tong, K. Wang, and S. Liu, The progress and challenges of tin-lead alloyed perovskites: toward the development of large-scale all-perovskite tandem solar cells. Chem 11, 100 (2025).10.1016/j.chempr.2024.12.002 ↗
10. X. Li, Y. Mai, C. Lan, F. Yang, P. Zhang, and S. Li, Machine learning-assisted design of high-performance perovskite photodetectors: a review. Adv. Compos. Hybrid Mater. 8, 1 (2025).
11. P. Shi, and G. Cui, Experimental system for photoluminescence and electroluminescence co-measurement based on perovskite quantum dot light-emitting diodes. J. Phys. Conf. Ser. 3006, 012050 (2025).10.1088/1742-6596/3006/1/012050 ↗
12. J. Wu, X. Wang, J. Hu, C. Li, L. Shi, S.S. Xia, Y. Cai, R. Jia, Z. Chen, and L. Li, Ultra-small cesium silver bismuth bromide quantum dots fabricated by modified hot-injection method for highly efficient degradation of contaminants in organic solvent. J. Environ. Sci. 152, 577 (2025).10.1016/j.jes.2024.06.011 ↗
13. M.H. Abdellattif, H. Noorizadeh, S. Al-Hasnaawei, S. Ganesan, A.F. Al-Hussainy, A. Sandhu, A. Sinha, and M. Kazemi, Tailoring charge storage mechanisms through TiO2 quantum dots: a multifunctional strategy for high-performance battery electrodes. Surfaces Interfaces. 9, 107164 (2025).10.1016/j.surfin.2025.107164 ↗
14. J. Liu, C. Li, S. Zhang, X. Wei, Y. Gao, F. Wang, M. Yan, J. Wang, and Y. Zhang, Green synthesis of boric acid modified bismuth based nontoxic perovskite quantum dots for highly sensitive detection of oxytetracycline. J. Fluoresc. 35, 1 (2024).10.1007/s10895-024-03933-0 ↗
15. S. Chandra, M.A. Mustafa, K. Ghadir, P. Bansal, M. Deorari, D.Y. Alhameedi, M.H. Alubiady, A.M. Al-Ani, S.O. Rab, S.S. Jumaa, and M.K. Abosaoda, Synthesis, characterization, and practical applications of perovskite quantum dots: recent update. Naunyn-Schmiedeberg’s Arch. Pharmacol. 398, 1 (2024).
16. X. Mei, G. Wang, J. Qiu, Z. Qi, M. Zhang, M. Yu, J. Liu, and X. Zhang, Surface stress engineering of CsPbI3 perovskite quantum dots for efficient solar cells. Small 21, 2500007 (2025).10.1002/smll.202500007 ↗
17. W. Li, T. Mi, T. Tian, M. Yang, and H. Pang, Mitigating lead toxicity in halide perovskite solar cells: strategies for sustainable development. Inorganics 13, 123 (2025).10.3390/inorganics13040123 ↗
18. A. Raj, R. Jayakrishnan, and S.J. Varma, Polymer encapsulation as an effective method for enhanced stability in perovskite quantum dots. AIP Conf. Proc. 2265, 030008 (2020).
19. H. Yu, Y. Liu, D. Han, X. Wang, and Y. Wang, An enclosed encapsulation strategy toward stable perovskite quantum dots: structure, lead immobilization, and backlight display applications. Inorg. Chem. 64, 1001 (2025).10.1021/acs.inorgchem.5c00929 ↗
20. F. Ullah, Z. Fredj, and M. Sawan, Perovskite quantum dot-based memory technologies: insights from emerging trends. Nanomaterials 15, 873 (2025).10.3390/nano15110873 ↗
21. H. Narimani, Functionalized silver nanoparticles: From plasmonic properties to theranostics applications in cancer with a focus on toxicity and safety challenges. Chem. Pharm. Lett. 1, 39 (2025).
22. Y. Li, Y. Zhao, A. Ruocco, M. Wang, B. Li, and S. Akhavan, Printed lithography of graphene-perovskite quantum dot hybrid photodetectors on paper substrates. ACS Appl. Mater. Interfaces 17, 1001 (2025).10.1021/acsami.4c16336 ↗
23. S.Y. Park, S. Lee, J. Yang, and M.S. Kang, Patterning quantum dots via photolithography: a review. Adv. Mater. 35, 2300546 (2023).10.1002/adma.202300546 ↗
24. X. Wu, K. Yin, M. Yang, Y. Hu, and H. Peng, Green synthesis of highly luminescent CsPbBr3 quantum dots through silica coating and post-treatment with ligands. Flexible Printed Electron. 8, 035008 (2023).10.1088/2058-8585/acedbe ↗
25. D.S. Ahmed, M.K. Mohammed, and S.M. Majeed, Green synthesis of eco-friendly graphene quantum dots for highly efficient perovskite solar cells. ACS Appl. Energy Mater. 3, 10863 (2020).10.1021/acsaem.0c01896 ↗
26. R. Li, J. Zhao, Y. Qiao, X. Liu, and S. Mei, Multifunctional colloidal quantum dots-based light-emitting devices for on-chip integration. Nanomaterials 15, 1422 (2025).10.3390/nano15181422 ↗
27. H.C. Wang, Z. Bao, H.Y. Tsai, A.C. Tang, and R.S. Liu, Perovskite quantum dots and their application in light-emitting diodes. Small 14, 1702433 (2018).10.1002/smll.201702433 ↗
28. X. Mei, D. Jia, J. Chen, S. Zheng, and X. Zhang, Approaching high-performance light-emitting devices upon perovskite quantum dots: advances and prospects. Nano Today 43, 101449 (2022).10.1016/j.nantod.2022.101449 ↗
29. Y. Ye, J. Wang, Z. Yang, Y. Chen, H. Zhang, Y. Bai, X. Jiang, B. Liu, J. Hong, Y. Chen, and Z. Fang, Uncovering the performance enhancing mechanism of methanesulfonate ligands in perovskite quantum dots for light-emitting devices. ACS Appl. Mater. Interfaces 17, 6639 (2025).10.1021/acsami.4c16554 ↗
30. T.T. Phan, T.K. Nguyen, T.K. Mac, and M.T. Trinh, Understanding and eliminating transient photoluminescence quenching in lead halide perovskite quantum dots for photonic applications. ACS Appl. Nano Mater. 8, 1001 (2025).10.1021/acsanm.5c02009 ↗
31. J. Ye, D. Gaur, C. Mi, Z. Chen, I.L. Fernández, H. Zhao, Y. Dong, L. Polavarapu, and R.L. Hoye, Strongly-confined colloidal lead-halide perovskite quantum dots: from synthesis to applications. Chem. Soc. Rev. 53, 1001 (2024).10.1039/D4CS00077C ↗
32. Y. Chen, S. Lu, M. Nan, J. Xie, W. Shen, A.N. Aleshin, G. Cheng, S. Chen, and W. Huang, Deep-blue CsPbBr3 perovskite quantum dots via green polar solvent and short ligand engineering towards highly efficient light-emitting diodes. Adv. Opt. Mater. 11, 2300473 (2023).10.1002/adom.202300473 ↗
33. L. He, Y. Ding, Q. Dong, W. Sun, and Y. Wang, Enhancement of luminous properties and stability of CH3NH3PbBr3 perovskite quantum dots using a low-cost, environmentally friendly and multisite passivation strategy. Opt. Mater. 154, 115708 (2024).10.1016/j.optmat.2024.115708 ↗
34. S. Zhao, Y. Guo, S. Tang, S. Zhu, W. Xie, M. Li, G. Shao, H. Xu, H. Wang, and H. Lu, Rare earth synergistic high-entropy halide perovskite quantum dots with excellent environmental stability preparing via high-energy ball milling. Ceram. Int. 51, 1001 (2025).
35. X.Y. Zhao, X.S. Zhang, X. Liu, X.K. Gong, X.R. Yuan, B.Z. Zhou, J.P. Xu, L.N. Kong, and L. Li, Improving efficiency of silicon solar cells by integrating SiO2-coated lead-free Cs3Bi2Br9 perovskite quantum dots as luminescence down-shifting layer. Colloids Surf A Physicochem Eng Asp 682, 132887 (2024).10.1016/j.colsurfa.2023.132887 ↗
36. R.K. Singh, S. Som, S. Dutta, N. Jain, J. Singh, R. Kumar, and C.H. Lu, Rapid and room temperature synthesis of MAPb1−xSnxBr 3–2xCl2x perovskite quantum dots with enhanced lifetime in warm WLEDs: a step towards environmental friendly perovskite light harvester. Chem. Eng. J. 391, 123629 (2020).10.1016/j.cej.2019.123629 ↗
37. L. Liang, J. Tong, L. Shen, Y. Zhang, E.Y. Pun, and H. Lin, Hydrochromic convertibility on fiberized self-assembling of copper-based perovskite quantum dots. Chem. Eng. J. 489, 151177 (2024).10.1016/j.cej.2024.151177 ↗
38. L. Fu, Y. Zi, X. Bai, D. Xiao, A.A. Haider, J. Qiu, Z. Song, Y. Cun, and Z. Yang, Preparation and photoluminescence of Cs4PbBr6 perovskite quantum dot embedded in borophosphate glass. J. Alloys Compd. 911, 165004 (2022).10.1016/j.jallcom.2022.165004 ↗
39. S. Yuan, D. Chen, X. Li, J. Zhong, and X. Xu, In situ crystallization synthesis of CsPbBr3 perovskite quantum dot-embedded glasses with improved stability for solid-state lighting and random upconverted lasing. ACS Appl. Mater. Interfaces 10, 18918 (2018).10.1021/acsami.8b05155 ↗
40. Z. Li, L. Kong, S. Huang, and L. Li, Highly luminescent and ultrastable CsPbBr3 perovskite quantum dots incorporated into a silica/alumina monolith. Angew. Chem. Int. Ed. 129, 8246 (2017).10.1002/ange.201703264 ↗
41. S. Huang, Z. Li, L. Kong, N. Zhu, A. Shan, and L. Li, Enhancing the stability of CH3NH3PbBr3 quantum dots by embedding in silica spheres derived from tetramethyl orthosilicate in “waterless” toluene. J. Am. Chem. Soc. 138, 5749 (2016).10.1021/jacs.5b13101 ↗
42. L. Hu, Q. Li, Y. Yao, Q. Zeng, Z. Zhou, C. Cazorla, T. Wan, X. Guan, J.K. Huang, C.H. Lin, and M. Li, Perovskite quantum dot solar cells fabricated from recycled lead-acid battery waste. ACS Mater. Lett. 4, 120 (2021).10.1021/acsmaterialslett.1c00592 ↗
43. X. Peng, C. Yan, F. Chun, W. Li, X. Zeng, X. Fu, Y. Gao, X. Chu, G. Tian, and W. Yang, Liquid nitrogen passivation for deep-blue perovskite quantum dots with nearly unit quantum yield. J. Phys. Chem. C 126, 1017 (2022).10.1021/acs.jpcc.1c08765 ↗
44. S. Tu, M. Chen, and L. Wu, Dual-encapsulation for highly stable all-inorganic perovskite quantum dots for long-term storage and reuse in white light-emitting diodes. Chem. Eng. J. 412, 128688 (2021).10.1016/j.cej.2021.128688 ↗
45. M.L. Meena, K.K. Gupta, S. Dutta, R. Kumar, R.K. Singh, C.H. Lu, S.D. Lin, and S. Som, Short review on the instability and potential solutions for perovskite quantum dots. Curr. Res. Green Sustain. Chem. 5, 100321 (2022).10.1016/j.crgsc.2022.100321 ↗
46. M. Albaladejo-Siguan, E.C. Baird, D. Becker-Koch, Y. Li, A.L. Rogach, and Y. Vaynzof, Stability of quantum dot solar cells: a matter of (life) time. Adv. Energy Mater. 11, 2003457 (2021).10.1002/aenm.202003457 ↗
47. H. Zhu, S. Teale, M.N. Lintangpradipto, S. Mahesh, B. Chen, M.D. McGehee, E.H. Sargent, and O.M. Bakr, Long-term operating stability in perovskite photovoltaics. Nat. Rev. Mater. 8, 569 (2023).10.1038/s41578-023-00582-w ↗
48. C. Gong, X. Wang, X. Xia, X. Yang, L. Wang, and F. Li, In-situ guanidinium bromide passivation treatment of CsPbBr3 perovskite quantum dots exhibiting high photoluminescence and environmental stability. Appl. Surf. Sci. 559, 149986 (2021).10.1016/j.apsusc.2021.149986 ↗
49. K. Xie, S. Zhang, X. Wang, C. Gong, C. Zheng, W. Xiao, and F. Li, Post-synthetic ammonium hexafluorophosphate treatment enables CsPbBr3 perovskite quantum dots exhibiting robust photoluminescence and environmental stability for white light-emitting diodes. J. Lumin. 252, 119401 (2022).10.1016/j.jlumin.2022.119401 ↗
50. G. Meng, X. Mu, L. Zhen, J. Hai, Z. Zhang, T. Hao, S. Lu, A. Wang, and B. Wang, Confinement and passivation of perovskite quantum dots in porous natural palygorskite toward an efficient and ultrastable light-harvesting system in water. Chem. Sci. 13, 14141 (2022).10.1039/D2SC05220B ↗
51. H. Liu, Z. Wu, J. Shao, D. Yao, H. Gao, Y. Liu, W. Yu, H. Zhang, and B. Yang, CsPbxMn1–xCl3 perovskite quantum dots with high Mn substitution ratio. ACS Nano 11, 2239 (2017).10.1021/acsnano.6b08747 ↗
52. L. Wu, Y. Pan, Y. Zhang, Y. Geng, J. Cao, X. Su, J. Xu, H. Xie, and D. Gao, Violet perovskite quantum dots of MA3Bi2Br 9 and MA3Bi2Br6Cl3 synthesized by the Cb-LARP method with tunable emission wavelengths in range of 379–400 nm. Adv. Funct. Mater. 35, 2415315 (2025).10.1002/adfm.202415315 ↗
53. M. Hao, Q. Wang, J. Li, W. Xiang, H. Fan, and X. Liang, An environment-friendly backlight display material: Dy3+-doped CsPbBr3 perovskite quantum dot glass with super high stability and ultra-wide color gamut. Mater. Today Chem. 26, 101020 (2022).10.1016/j.mtchem.2022.101020 ↗
54. J. Park, G. Murali, B. Kwon, W. Jeong, G. Jeong, S.R. Ch, S.Y. Park, and I. In, Mussel-inspired polymer grafting on CsPbBr3 perovskite quantum dots enhancing the environmental stability. Part. Part. Syst. Charact. 36, 1900332 (2019).10.1002/ppsc.201900332 ↗
55. C. Guo, C. Bi, S. Wei, K. Ren, X. Huang, L. Tao, X. Wang, N.H. de Leeuw, and W. Wang, Highly efficient and stable CsPbI3 perovskite quantum dots light-emitting diodes through synergistic effect of halide-rich modulation and lattice repair. Small 21, 2409630 (2025).10.1002/smll.202409630 ↗
56. J. Shi, Z. Wang, N.V. Gaponenko, Z. Da, C. Zhang, J. Wang, Y. Ji, Y. Ding, Q. Yao, Y. Xu, and M. Wang, Stability enhancement in all-inorganic perovskite light emitting diodes via dual encapsulation. Small 20, 2310478 (2024).10.1002/smll.202310478 ↗
57. Z. Zhang, L. Liu, H. Huang, L. Li, Y. Wang, J. Xu, and J. Xu, Encapsulation of CsPbBr3 perovskite quantum dots into PPy conducting polymer: exceptional water stability and enhanced charge transport property. Appl. Surf. Sci. 526, 146735 (2020).10.1016/j.apsusc.2020.146735 ↗
58. C. Liu, W.T. Huang, and R.S. Liu, Stable glass-protected CsPbX3 (X= Cl, Br, and I) perovskite quantum dots and their applications in backlight LED. Prog. Mater. Sci. 143, 101243 (2024).10.1016/j.pmatsci.2024.101243 ↗
59. H. Yang, J. Li, Z. Wang, Y. Zhong, H. Yang, H. Dong, and L. Zhang, Universal surface repairing strategy enabling suppressed Auger recombination in CsPbBr3 perovskite quantum dots for low threshold lasing in a superlattice microcavity. Adv. Opt. Mater. 12, 2400141 (2024).10.1002/adom.202400141 ↗
60. X. Mei, J. Wang, X. Zhang, R. Zhuang, Y. Hua, K. He, W. Zheng, and X. Zhang, In situ ligand compensation of perovskite quantum dots for efficient light-emitting diodes. ACS Energy Lett. 8, 4386 (2023).10.1021/acsenergylett.3c01686 ↗
61. Q. Shan, Y. Dong, H. Xiang, D. Yan, T. Hu, B. Yuan, H. Zhu, Y. Wang, and H. Zeng, Perovskite quantum dots for the next-generation displays: progress and prospect. Adv. Funct. Mater. 34, 2401284 (2024).10.1002/adfm.202401284 ↗
62. X. Mei, K. He, R. Zhuang, M. Yu, Y. Hua, and X. Zhang, Stabilizing dynamic surface of highly luminescent perovskite quantum dots for light-emitting diodes. Chem. Eng. J. 453, 139909 (2023).10.1016/j.cej.2022.139909 ↗
63. Y. Liu, J. Zhang, E. Csányi, N.Q. Adanan, H. Wang, Z. Zhang, S.L. Yap, H.Y. Lee, S. Zhang, W.P. Goh, and L.J. Lim, Electrically tunable and modulated perovskite quantum emitters via surface-enhanced Landau damping. Adv. Mater. 37, 2419076 (2025).10.1002/adma.202419076 ↗
64. A. Olejniczak, Y. Rakovich, and V. Krivenkov, Advancements and challenges in plasmon-exciton quantum emitters based on colloidal quantum dots and perovskite nanocrystals. Mater. Quantum Technol. 4, 032001 (2024).10.1088/2633-4356/ad6b6d ↗
65. P. Bansal, H. Bhatia, and E. Debroye, Tunable green-to-blue light emitting hybrid perovskite nanocrystals: status updates and roadblocks. ACS Photonics 10, 3821 (2023).10.1021/acsphotonics.3c01001 ↗
66. H. Yu, X. Su, Y. Pan, D. Gao, J. Wang, R. Chen, J. Zhang, F. Dou, X. Zhang, K. Ge, and X. Shi, Narrow linewidth CsPbBr3 perovskite quantum dots microsphere lasers. Opt. Mater. 133, 112907 (2022).10.1016/j.optmat.2022.112907 ↗
67. J. Li, Y. Fan, T. Xuan, H. Zhang, W. Li, C. Hu, J. Zhuang, R.S. Liu, B. Lei, Y. Liu, and X. Zhang, In situ growth of high-quality CsPbBr3 quantum dots with unusual morphology inside a transparent glass with a heterogeneous crystallization environment for wide gamut displays. ACS Appl. Mater. Interfaces 14, 30029 (2022).10.1021/acsami.2c06653 ↗
68. F.F. Sead, Y. Jadeja, A. Kumar, M.M. Rekha, M. Kundlas, S. Saini, K.K. Joshi, and H. Noorizadeh, Carbon quantum dots for sustainable energy: enhancing electrocatalytic reactions through structural innovation. Nanoscale Advances. 7, 3961 (2025).10.1039/D5NA00205B ↗
69. H.Y. Chou, C.W. Lo, K.P. Chang, W.Y. Shi, C.C. Yen, and D.S. Wuu, Synthesis of SiO2-coated perovskite quantum dots for micro-LED display applications. Surf. Interfaces 38, 102802 (2023).10.1016/j.surfin.2023.102802 ↗
70. C. Wang, J. Cai, Y. Ye, X. Hu, L. Zhong, H. Xie, E. Chen, Y. Ye, S. Xu, J. Sun, and Q. Yan, Full-visible-spectrum perovskite quantum dots by anion exchange resin assisted synthesis. Nanophotonics 11, 1355 (2022).10.1515/nanoph-2021-0768 ↗
71. C. Ma, M. Zhang, J. Zhang, J. Liao, H. Sun, D. Ji, R. Pang, H. Zhang, J. Liu, and S. Liu, Highly luminescent and stable perovskite quantum dots films for light-emitting devices and information encryption. Adv. Funct. Mater. 34, 2316717 (2024).10.1002/adfm.202316717 ↗
72. X. Cao, Z. Ma, T. Cheng, Y. Wang, Z. Shi, J. Wang, and L. Zhang, Air-stable, eco-friendly RRAMs based on lead-free Cs3Bi2Br 9 perovskite quantum dots for high-performance information storage. Energy Environ. Mater. 6, e12419 (2023).10.1002/eem2.12419 ↗
73. X. Yang, C. Valenzuela, X. Zhang, Y. Chen, Y. Yang, L. Wang, and W. Feng, Robust integration of polymerizable perovskite quantum dots with responsive polymers enables 4D-printed self-deployable information display. Matter 6, 1278 (2023).10.1016/j.matt.2023.02.003 ↗
74. X. Guan, C.Y. Huang, L. Hu, D. Periyanagounder, Z. Lei, J. Kim, M.Z. Rahaman, J.K. Huang, P. Kumar, and C.H. Lin, Perovskite quantum dots embedded paper photodetectors with high flexibility and self-powered operation. J. Mater. Chem. C 12, 5784 (2024).10.1039/D4TC00508B ↗
75. B. Yu, S. Liang, F. Zhang, Z. Li, B. Liu, and X. Ding, Water-stable CsPbBr3 perovskite quantum-dot luminous fibers fabricated by centrifugal spinning for dual white light illumination and communication. Photonics Res. 9, 1559 (2021).10.1364/PRJ.427066 ↗
76. J. Ryu, J. Lee, D. Kim, Y.J. Lee, J.H. Kim, J. Oh, and J. Kim, Time-/environment-dependent multilevel optical encryption through photoluminescence enhancement of perovskite quantum dot/polymer composite via silver epoxy paste. Nano Mater. Sci. 7, 1001 (2025).
77. Q. Chen, X. Huang, D. Yang, Y. Le, Q. Pan, M. Li, H. Zhang, J. Kang, X. Xiao, J. Qiu, and Z. Yang, Three-dimensional laser writing aligned perovskite quantum dots in glass for polarization-sensitive anticounterfeiting. Adv. Opt. Mater. 11, 2300090 (2023).10.1002/adom.202300090 ↗
78. H. Xiao, J. Lin, R. Chen, T. Pang, P. Huang, Y. Yu, B. Zhuang, Q. Ye, R. Zhang, and D. Chen, Humidity-induced reversible crystallization of laser-printing perovskite quantum dots in glass. Laser Photonics Rev. 18, 2300705 (2024).10.1002/lpor.202300705 ↗
79. J. Jean, J. Xiao, R. Nick, N. Moody, M. Nasilowski, M. Bawendi, and V. Bulović, Synthesis cost dictates the commercial viability of lead sulfide and perovskite quantum dot photovoltaics. Energy Environ. Sci. 11, 2295 (2018).10.1039/C8EE01348A ↗
80. M. Xiao, M. Hao, M. Lyu, E.G. Moore, C. Zhang, B. Luo, J. Hou, J. Lipton-Duffin, and L. Wang, Surface ligands stabilized lead halide perovskite quantum dot photocatalyst for visible light-driven hydrogen generation. Adv. Funct. Mater. 29, 1905683 (2019).10.1002/adfm.201905683 ↗
81. Y. Zijun, L. Zhong, Y. Xiao, L. Shouqiang, Y. Fengyu, L. Zongmin, L. Yue, L. Yijun, K. Haochung, C. Zhong, and W. Tingzhu, Perovskite quantum dot color conversion micro-LEDs: progress in stability and patterning. Opto-Electron. Eng. 51, 240088 (2024).
82. S. Bhandari, S. Pramanik, M. Manna, S. Singha, and F. Akhtar, Surface modification unleashes light emitting applications of APbX3 perovskite nanocrystals. Chem. Commun. 61, 817 (2025).10.1039/D4CC05491A ↗
83. P. Palomaki, Future of quantum dots in displays and beyond. Quantum Dot Display Sci. Technol. 1, 445 (2025).10.1002/9781394181889.ch14 ↗
84. S. Aftab, G. Koyyada, M. Mukhtar, H.H. Hegazy, and J.H. Kim, From energy to light: advancements in perovskite quantum dots for optoelectronics. J. Mater. Chem. C 12, 17789 (2024).10.1039/D4TC02230K ↗
85. S. Rakshit, P. Piatkowski, I. Mora-Seró, and A. Douhal, Combining perovskites and quantum dots: synthesis, characterization, and applications in solar cells, LEDs, and photodetectors. Adv. Opt. Mater. 10, 2102566 (2022).10.1002/adom.202102566 ↗
86. Pinto FM, Dey S, Duarte TM, Taft CA, La Porta FA. Perovskite-like quantum dots designed for advanced optoelectronic applications. In: Functional Properties of Advanced Engineering Materials and Biomolecules, p. 83 (2021).10.1007/978-3-030-62226-8_3 ↗
87. X. Wang, Z. Bao, Y.C. Chang, and R.S. Liu, Perovskite quantum dots for application in high color gamut backlighting display of light-emitting diodes. ACS Energy Lett. 5, 3374 (2020).10.1021/acsenergylett.0c01860 ↗
88. S. Gressler, F. Part, S. Scherhaufer, G. Obersteiner, and M. Huber-Humer, Advanced materials for emerging photovoltaic systems–environmental hotspots in the production and end-of-life phase of organic, dye-sensitized, perovskite, and quantum dots solar cells. Sustain. Mater. Technol. 34, e00501 (2022).
89. S.Y. Ma, J.K. Li, and Z.M. Liu, Stability of core–shell structure CsPbX3@SiO2 (X= Cl, Br) perovskite quantum dots. Chem. Phys. Lett. 843, 141242 (2024).10.1016/j.cplett.2024.141242 ↗
90. E. Yalva, M.A. Latifoğlu, A. Al-Otaify, A.F. Elhag, and M. Çadırcı, Enhanced photoluminescence stability in mixed halide perovskite quantum dots via zinc doping. J. Alloys Compd. 1016, 178911 (2025).10.1016/j.jallcom.2025.178911 ↗
91. H.M. Cho, and H.W. Jang, Inorganic halide perovskite quantum dots for memristors. Electron. Mater. Lett. 21, 1001 (2025).10.1007/s13391-025-00560-0 ↗
92. J.W. Kim, J. Kim, J.Y. Woo, and Y. Kim, Comprehensive review of core/shell nanostructures of lead-halide perovskite quantum dots for improved optoelectronic performance and stability. J. Mater. Chem. A 13, 1001 (2025).10.1039/D5TA03459K ↗