CuI-Derived CuxO Thin Films Development via Thermal Oxidation for Lead-Free Perovskite Solar Cells
Source abstract
Abstract
Abstract The development of low-cost, stable, and efficient hole transport layers (HTLs) is crucial to the advancement of lead-free perovskite solar cells. In this work, a solution-based oxidation process is employed to convert spin-coated copper iodide (CuI) films into mixed-phase copper oxide (CuxO) thin films comprising Cu₂O and CuO. Oxidation occurs under moderate temperatures (200–300°C), leading to uniform, compact, and highly conductive p-type films with tunable bandgaps. Structural, morphological, and optical analysis confirms successful phase transformation, and measurements of Hall effect reveal maximum mobility of holes of 26.7 cm2 V−1 s−1 for double-coated films annealed at 300°C. Device simulations via SCAPS-1D using these measured properties predict that CuxO HTLs can make high-efficiency lead-free perovskite solar cells with Cs₂AgBi₁−xSbₓBr₆ absorbers. While experimental device integration is yet to be demonstrated, this research lays the foundation for oxidized CuI-derived CuxO as a potential candidate inorganic HTL for green photovoltaics and offers thoughtful guidance for subsequent experimentation.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Perovskite Materials and Applications · Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. N. Renewable Energy Laboratory, “NREL Best Research-Cell PV Efficiency Chart,” 2025.
2. O. Malinkiewicz et al., Perovskite solar cells employing organic charge-transport layers. Nat. Photonics 8(2), 128–132 (2014). https://doi.org/10.1038/nphoton.2013.341.10.1038/nphoton.2013.341 ↗
3. H. Zhou, “Interface engineering of highly efficient perovskite solar cells,” Science (1979), vol. 345, no. 6196, pp. 542–546, 2014.10.1126/science.1254050 ↗
4. P. Qin, “Inorganicholeconductor-basedleadhalide perovskitesolarcellswith12.4%conversion efficiency,” Nat Commun, vol. 3834, no. 5, 2014.10.1038/ncomms4834 ↗
5. K. C. Wang et al., “P-type mesoscopic nickel oxide/organometallic perovskite heterojunction solar cells,” Sci Rep, vol. 4, Apr. 2014, https://doi.org/10.1038/srep04756.10.1038/srep04756 ↗
6. S. Ye et al., CuSCN-Based Inverted Planar Perovskite Solar Cell with an Average PCE of 15.6%. Nano Lett. 15(6), 3723–3728 (2015). https://doi.org/10.1021/acs.nanolett.5b00116.10.1021/acs.nanolett.5b00116 ↗
7. J.A. Christians, R.C.M. Fung, and P.V. Kamat, An inorganic hole conductor for Organo-lead halide perovskite solar cells. improved hole conductivity with copper iodide. J. Am. Chem. Soc. 136(2), 758–764 (2014). https://doi.org/10.1021/ja411014k.10.1021/ja411014k ↗
8. T. Jiang et al., Photoinduced charge transfer in ZnO/Cu2O heterostructure films studied by surface photovoltage technique. Phys. Chem. Chem. Phys. 12(47), 15476–15481 (2010). https://doi.org/10.1039/c0cp01228a.10.1039/c0cp01228a ↗
9. C. Zuo, and L. Ding, Solution-Processed Cu2O and CuO as Hole Transport Materials for Efficient Perovskite Solar Cells. Small 11(41), 5528–5532 (2015). https://doi.org/10.1002/smll.201501330.10.1002/smll.201501330 ↗
10. M. A. Islam et al., “High mobility reactive sputtered CuxO thin film for highly efficient and stable perovskite solar cells,” Crystals (Basel), vol. 11, no. 4, Apr. 2021, https://doi.org/10.3390/cryst11040389.10.3390/cryst11040389 ↗
11. C. Lin et al., “The Investigation of the Influence of a Cu2O Buffer Layer on Hole Transport Layers in MAPbI3-Based Perovskite Solar Cells” Materials, vol. 15, no. 22, Nov. 2022, https://doi.org/10.3390/ma15228142.10.3390/ma15228142 ↗
12. S. Chatterjee, and A.J. Pal, Introducing Cu2O thin films as a hole-transport layer in efficient planar perovskite solar cell structures. J. Phys. Chem. C 120(3), 1428–1437 (2016). https://doi.org/10.1021/acs.jpcc.5b11540.10.1021/acs.jpcc.5b11540 ↗
13. S. Joseph, and P.V. Kamath, Electrochemical deposition of Cu2O on stainless steel substrates: Promotion and suppression of oriented crystallization. Solid State Sci. 10(9), 1215–1221 (2008). https://doi.org/10.1016/j.solidstatesciences.2007.11.007.10.1016/j.solidstatesciences.2007.11.007 ↗
14. L. C. Chen, C. C. Wang, and S. W. Lu, “Annealing effects of sputtered Cu2O nanocolumns on ZnO-coated glass substrate for solar cell applications,” J Nanomater, vol. 2013, 2013, https://doi.org/10.1155/2013/891365.10.1155/2013/891365 ↗
15. G. Jimenez-Cadena, E. Comini, M. Ferroni, and G. Sberveglieri, Synthesis of Cu2O bi-pyramids by reduction of Cu(OH)2 in solution. Mater. Lett. 64(3), 469–471 (2010). https://doi.org/10.1016/j.matlet.2009.11.051.10.1016/j.matlet.2009.11.051 ↗
16. R. Nordseth, R. Kumar, K. Bergum, I. Chilibon, S. E. Foss and E. Monakhov, “Nitrogen-doped Cu2O thin films for photovoltaic applications,” Materials, vol. 12, no. 18, Sep. 2019, https://doi.org/10.3390/ma12183038.10.3390/ma12183038 ↗
17. D. Suriyani and C. Halin, “CHARACTERIZATION OF CUPROUS OXIDE THIN FILMS ON n-Si SUBSTRATE PREPARED BY SOL-GEL SPIN COATING,” 2008. [Online]. Available: https://www.researchgate.net/publication/261296097
18. W. Nie, “Solar cells. 2015 High-efficiency solution-processed perovskite solar cells with millimeter-scale grains,” Science, 347, 6221, pp. 522–52510.1126/science.aaa0472 ↗
19. J. Kim, Effect of defects on reaction of NiO surface with Pb-contained solution. Sci. Rep. 7, 44805 (2017). https://doi.org/10.1038/srep44805.10.1038/srep44805 ↗
20. W. Sun et al., High-performance inverted planar heterojunction perovskite solar cells based on a solution-processed CuOx hole transport layer. Nanoscale 8(20), 10806–10813 (2016). https://doi.org/10.1039/c6nr01927g.10.1039/c6nr01927g ↗
21. M. Jakir Hossen et al., Recent progress on the efficiency and stability of lead-free Cs2AgBiBr6 double halide perovskite solar cells. Inst. Phys. (2025). https://doi.org/10.1088/1402-4896/ad9b59.10.1088/1402-4896/ad9b59 ↗
22. K.Z. Du, W. Meng, X. Wang, Y. Yan and D.B. Mitzi, Bandgap engineering of lead-free double perovskite Cs2AgBiBr6 through trivalent metal alloying. Angewandte Chemie Int. Edition 56(28), 8158–8162 (2017). https://doi.org/10.1002/anie.201703970.10.1002/anie.201703970 ↗
23. Y. Liu et al., Bandgap-tunable double-perovskite thin films by solution processing. Mater. Today 28, 25–30 (2019). https://doi.org/10.1016/j.mattod.2019.04.023.10.1016/j.mattod.2019.04.023 ↗
24. M.J. Hossen et al., Modeling and optimization of high efficiency Pb-free Cs-based halide double perovskite solar cell using SCAPS-1D. J. Opt. (India) (2025). https://doi.org/10.1007/s12596-025-02550-9.10.1007/s12596-025-02550-9 ↗
25. N. Serin, T. Serin, Ş Horzum and Y. Çelik, Annealing effects on the properties of copper oxide thin films prepared by chemical deposition. Semicond. Sci. Technol. 20(5), 398–401 (2005). https://doi.org/10.1088/0268-1242/20/5/012.10.1088/0268-1242/20/5/012 ↗
26. J. Naktiyok and A. K. Özer, “BAKIR ASETAT MONOHİDRATIN (Cu(CH3COO)2.H2O) TERMAL BOZUNMASINDAN BAKIR OKSİT (CuO) SENTEZİ,” Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi, Jul. 2019, https://doi.org/10.28948/ngumuh.598177.10.28948/ngumuh.598177 ↗
27. A. Hannan, S. Islam, S.R. Parvin, and J. Hossen, Unusual crystal-lattice behaviour of CeSb at ambient pressure. J. Natl. Sci. Foundation Sri Lanka 38(3), 201–205 (2010).10.4038/jnsfsr.v38i3.2310 ↗
28. A. Rydosz, K. Dyndał, W. Andrysiewicz, D. Grochala and K. Marszałek, GLAD magnetron sputtered ultra-thin copper oxide films for gas-sensing application. Coatings (2020). https://doi.org/10.3390/coatings10040378.10.3390/coatings10040378 ↗
29. B. Balamurugan and B.R. Mehta, “Optical and structural properties of nanocrystalline copper oxide thin films prepared by activated reactive evaporation. Thin Solid Films 396(1–2), 90–96 (2001).10.1016/S0040-6090(01)01216-0 ↗
30. M.R. Johan, M.S.M. Suan, N.L. Hawari and H.A. Ching, Annealing effects on the properties of copper oxide thin films prepared by chemical deposition. Int. J. Electrochem. Sci. 6(12), 6094–6104 (2011). https://doi.org/10.1016/s1452-3981(23)19665-9.10.1016/s1452-3981(23)19665-9 ↗
31. H. Rahal, R. Kihal, A.M. Affoune and S. Rahal, Electrodeposition and characterization of Cu2O thin films using sodium thiosulfate as an additive for photovoltaic solar cells. Chin. J. Chem. Eng. 26(2), 421–427 (2018). https://doi.org/10.1016/j.cjche.2017.06.023.10.1016/j.cjche.2017.06.023 ↗
32. C. Malerba, F. Biccari, C.L. Azanza Ricardo, M. Dincau, P. Scardi and A. Mittiga, “Erratum: absorption coefficient of bulk and thin film Cu2O. Solar Energy Mater. Solar Cells 95(10), 2848–2854 (2012). https://doi.org/10.1016/j.solmat.2011.10.018.10.1016/j.solmat.2011.10.018 ↗
33. P. Pattanasattayavong, S. Thomas, G. Adamopoulos, M.A. McLachlan and T.D. Anthopoulos, P-channel thin-film transistors based on spray-coated Cu2O films. Appl. Phys. Lett. 102, 16 (2013). https://doi.org/10.1063/1.4803085.10.1063/1.4803085 ↗
34. N. Singh, A. Agarwal and M. Agarwal, Performance evaluation of lead–free double-perovskite solar cell. Opt Mater (Amst) 114, 1–11 (2021). https://doi.org/10.1016/j.optmat.2021.110964.10.1016/j.optmat.2021.110964 ↗
35. M. Burgelman, K. Decock, A. Niemegeers, J. Verschraegen, and S. Degrave, “SCAPS manual.”
36. S. Zandi, P. Saxena, M. Razaghi and N.E. Gorji, Simulation of CZTSSe thin-film solar cells in COMSOL: three-dimensional optical, electrical, and thermal models. IEEE J. Photovolt. 10(5), 1503–1507 (2020). https://doi.org/10.1109/JPHOTOV.2020.2999881.10.1109/JPHOTOV.2020.2999881 ↗
37. M. Kumar, A. Kumar, A. Raj, P. C. Sati, M. Sahni and A. Anshul, “Organic-inorganic perovskite-based solar cell designs for high conversion efficiency: A comparative study by SCAPS simulation,” in Materials Today: Proceedings, Elsevier Ltd, 2020, pp. 3081–3087. https://doi.org/10.1016/j.matpr.2020.11.035.10.1016/j.matpr.2020.11.035 ↗
38. U. Mandadapu, Simulation and analysis of lead based perovskite solar cell using SCAPS-1D. Indian J. Sci. Technol. 10(1), 1–8 (2017). https://doi.org/10.17485/ijst/2017/v11i10/110721.10.17485/ijst/2017/v11i10/110721 ↗
39. D. Jalalian, A. Ghadimi and A. Kiani, Modeling of a high performance bandgap graded Pb-free HTM-free perovskite solar cell. Eur. Phys. J. Appl. Phys. 87(1), 10101 (2019). https://doi.org/10.1051/epjap/2019190095.10.1051/epjap/2019190095 ↗
40. S. I. Rahman, S. Faisal, S. Ahmed and T. I. Dhrubo, “A comparative study on different HTMs in perovskite solar cell with ZnOS electron transport layer,” in 5th IEEE Region 10 Humanitarian Technology Conference 2017, R10-HTC 2017, Institute of Electrical and Electronics Engineers Inc., Feb. 2018, pp. 546–550. https://doi.org/10.1109/R10-HTC.2017.8289019.10.1109/R10-HTC.2017.8289019 ↗
41. J. Madan, R. Pandey and R. Sharma, Device simulation of 17.3% efficient lead-free all-perovskite tandem solar cell. Sol. Energy 197, 212–221 (2020). https://doi.org/10.1016/j.solener.2020.01.006.10.1016/j.solener.2020.01.006 ↗
42. M.I. Hossain, F.H. Alharbi and N. Tabet, Copper oxide as inorganic hole transport material for lead halide perovskite based solar cells. Sol. Energy 120, 370–380 (2015). https://doi.org/10.1016/j.solener.2015.07.040.10.1016/j.solener.2015.07.040 ↗
43. H.R. Arzbin and A. Ghadimi, Improving the performance of a multi-junction solar cell by optimizing BSF, base and emitter layers. Mater. Sci. Eng. B 243, 108–114 (2019). https://doi.org/10.1016/j.mseb.2019.04.001.10.1016/j.mseb.2019.04.001 ↗
44. F. Jannat, S. Ahmed and M.A. Alim, Performance analysis of cesium formamidinium lead mixed halide based perovskite solar cell with MoOx as hole transport material via SCAPS-1D. Optik (Stuttg) (2021). https://doi.org/10.1016/j.ijleo.2020.166202.10.1016/j.ijleo.2020.166202 ↗
45. W. Abdelaziz, A. Shaker, M. Abouelatta and A. Zekry, Possible efficiency boosting of non-fullerene acceptor solar cell using device simulation. Opt Mater (Amst) 91, 239–245 (2019). https://doi.org/10.1016/j.optmat.2019.03.023.10.1016/j.optmat.2019.03.023 ↗
46. A. Zekry, A. Shaker and M. Salem, “Solar cells and arrays: principles, analysis, and design,” in Advances in Renewable Energies and Power Technologies: Volume 1: Solar and Wind Energies, vol. 1, Elsevier, 2018, pp. 3–56. https://doi.org/10.1016/B978-0-12-812959-3.00001-0.10.1016/B978-0-12-812959-3.00001-0 ↗
47. J.P. Correa-Baena et al., Unbroken perovskite: interplay of morphology, electro-optical properties, and ionic movement. Adv. Mater. 28(25), 5031–5037 (2016). https://doi.org/10.1002/adma.201600624.10.1002/adma.201600624 ↗
48. M.B. Rahman, N. Noor-E-Ashrafi, M.H. Miah, M.U. Khandaker and M.A. Islam, Selection of a compatible electron transport layer and hole transport layer for the mixed perovskite FA0.85Cs0.15Pb (I0.85Br 0.15)3, towards achieving novel structure and high-efficiency perovskite solar cells: a detailed numerical study by SCAPS-1D. RSC Adv. 13(25), 17130–17142 (2023). https://doi.org/10.1039/d3ra02170j.10.1039/d3ra02170j ↗
49. A. Kumar, S.K. Swami, S.S. Rawat, V.N. Singh, O.P. Sinha and R. Srivastava, Mixed bismuth-antimony-based double perovskite nanocrystals for solar cell application. Int. J. Energy Res. 45(11), 16769–16780 (2021). https://doi.org/10.1002/er.6924.10.1002/er.6924 ↗
50. M. Pantaler, S. Olthof, K. Meerholz and D.C. Lupascu, Bismuth-antimony mixed double perovskites Cs2AgBi1-xSbxBr 6 in solar cells. MRS Adv. 357, 1–8 (2019). https://doi.org/10.1557/adv.2019.404.10.1557/adv.2019.404 ↗
51. M. M. H. M. S. R. M. A. M. H. Asif Hossain, Fully lead-free all perovskite tandem solar cell with improved efficiency: device simulation using SCAPS-1D. IEEE, 2020. doi.org/https://doi.org/10.1109/TENSYMP50017.2020.9230927.10.1109/TENSYMP50017.2020.9230927 ↗