journal article·2025-05Open access

Interfacial Effects of Surface Roughness and Topography on the Bond Strength of Silver-Sintered Joints on Copper Substrates

Tamira Stegmann, Karsten Durst, Enrico Bruder, Stefan Gunst, André Schwöbel

Journal of Electronic Materials· Volume 54· Issue 5

Abstract

Abstract The increasing focus on renewable energy and electromobility is driving advancements in power electronics devices, with the industry increasingly utilizing wide-bandgap semiconductors and alternative interconnect technologies such as silver sintering to meet high-performance requirements. This study investigates the interfacial effects of surface roughness and topography on the bonding strength of silver-sintered joints on copper substrates, considering variations in silver particle size. Experimental analysis includes surface modifications, characterization using microscopy techniques, shear testing for bond strength evaluation, and assessment of joint porosity. The study demonstrates that surface roughness and topography significantly impact the bond strength, with surface blasting reducing bond strength and anisotropy effects being observed for ground surfaces. It is suggested that there are limitations on achievable bond strength due to increased surface roughness from mechanical treatment. Additionally, this work emphasizes the significance of surface topography in addition to surface roughness values such as R a and examines the interaction between silver particle size and roughness at both the micron and submicron levels in terms of bond strength and porosity. Maximum bond strength is achieved at lower roughness levels (R a < 1 µm) for submicron and micron particles in silver sintered joints. However, contrary to recent research, maximum bond strength of the micron-particle sintered material is achieved at a ratio 0.1 of R a to particle diameter d, one order of magnitude lower than that of the submicron-particle sintered material. Therefore, achieving strong adhesion and bond strength in silver-sintered joints requires careful consideration of surface properties and particle size.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Copper Interconnects and Reliability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. F. Blaabjerg, Y. Yang, K. Ma, and X. Wang, in International Conference on Renewable Energy Research and Applications (ICRERA), (2015)
2. B.K. Bose, IEEE Trans Ind. Electron. 105, 2011 (2013).
3. S. Rivera, S.M. Goetz, S. Kouro, P.W. Lehn, M. Pathmanathan, P. Bauer, and R.A. Mastromauro, in Proceedings of IEEE (2023), p. 371–39610.1109/JPROC.2022.3216362 ↗
4. K. Bond, S. Butler-Sloss, D. Walter, H. Benham, E.J. Klock-McCook, D. Mullaney, Y. Numata, L. Speelman, C. Stranger, and N. Topping, X-change: Cars: The end of the ICE age (2023), https://rmi.org/wp-content/uploads/dlm_uploads/2023/09/x_change. Accessed 14 May 2024.
5. J. Homberger, A.B. Lostetter, K.J. Olejniczak, T. McNutt, S.M. Lal, and A. Mantooth, in IEEE Aerospace Conference Proceedings (2004)
6. H. Jain, S. Rajawat, and P. Agrawal, in IEEE International Conference on Recent Advances in Microwave Theory and Applications (2008)
7. W.R. Osório, D.R. Leiva, L.C. Peixoto, L.R. Garcia, and A. Garcia, Mechanical properties of Sn–Ag lead-free solder alloys based on the dendritic array and Ag3Sn morphology. J. Alloys Compd. 562, 194 (2013).10.1016/j.jallcom.2013.02.050 ↗
8. A. Masson, W. Sabbah, R. Riva, C. Buttay, S. Azzopradi, H. Morel, D. Planson, and R. Meuret, Die attach using silver sintering. Practical implementation and analysis. Eur. J. Electr. Eng. 16, 293 (2013).10.3166/ejee.16.293-305 ↗
9. A. Rost, S. Mosch, and J. Schilm, Active metal brazed Cu-Si3N4 composites for power electronics. PCIM Europe (2023). https://doi.org/10.30420/56609119510.30420/566091195 ↗
10. G.-Q. Lu, M. Wang, Y. Mei, and X. Li, Advanced die-attach by metal-powder sintering: the science and practice, in International Conference on Integrated Power Electronics Systems (2018)
11. M. Wang, Y. Mei, W. Hu, X. Li, and G.-Q. Lu, Pressureless sintered-silver as die attachment for bonding Si and SiC chips on silver, gold, copper, and nickel metallization for power electronics packaging: the practice and science. J. Emerg. Sel. Top. Power Electron. 10, 2645 (2022).10.1109/JESTPE.2022.3150223 ↗
12. M. Wang, Y. Mei, X. Li, R. Burgos, D. Boroyevich, and G.-Q. Lu, How to determine surface roughness of copper substrate for robust pressureless sintered silver in air. Mater. Lett. 228, 327 (2018).10.1016/j.matlet.2018.06.048 ↗
13. H. Zheng, D. Berry, K.D.T. Ngo, and G.-Q. Lu, in IEEE Trans. Compon., Packag., Manuf. Technol. (2014).
14. C. Buttay, A. Masson, J. Li, M. Johnson, M. Lazar, C. Raynaud, and H. Morel, in IMAPS (HiTEN) (2011)10.4071/HITEN-Paper7-CButtay ↗
15. A. Masson, C. Buttay, H. Morel, C. Raynaud, S. Hascoet, and L. Gremillard, in Proceedings of the European Conference on Power Electronics and Applications (2011)
16. A.A. Wereszczak, D.J. Vuono, Z. Liang, and E.E. Fox, in International Conference on Integrated Power Electronics Systems (2012)
17. C.-J. Du, X. Li, Y.-H. Mei, and G.-Q. Lu, Bonding performance of sintered nanosilver joints on bare copper substrates with different grain structures. J. Mater. Sci. Mater. Electron. 30, 12860 (2019).10.1007/s10854-019-01601-9 ↗
18. C. Chen, Y. Gao, Z.-Q. Liu, and K. Suganuma, 3D pyramid-shape Ag plating assisted interface connection growth of sinter micron-sized Ag paste. Scr. Mater. 179, 36 (2020).10.1016/j.scriptamat.2019.12.040 ↗
19. T. Stegmann, A. Schwöbel, W. Schmitt, S. Gunst, K. Durst, P. Klar, N. Neugebauer, and J.L. Dornseifer, in IEEE Electronic Components and Technology Conference (2023).
20. X. Wang, Y. Mei, X. Li, M. Wang, Z. Cui, and G.-Q. Lu, Pressureless sintering of nanosilver paste as die attachment on substrates with ENIG finish for semiconductor applications. J. Alloys Compd. 777, 578 (2019).10.1016/j.jallcom.2018.10.294 ↗