journal article·2020-09

Investigation of Various Bumps and Redistribution Lines to Inhibit Protected Silicon Nitride Cracks in High Pattern Density Chip Package

Ching-Yuan Ho, Hsin Cheng, Yuan-Chih Chang, Hwa-Teng Lee

Journal of Electronic Materials· Volume 49· Issue 9
Publisher page

Abstract

Mechanical stress related to chip packaging failure is the most common reliability issue in semiconductor devices, especially for high pattern density of very-large-scale integration. In this paper, redistribution lines (RDL) corresponding to gold and copper materials with capped layers (Sn-Ag and Au-Ni) were evaluated to investigate the structure dependency on the mechanical properties of intermetallic compounds, and to provide a solution to improve chip package reliability in regard to protect Si3N4 cracks. The simulation results revealed that a thicker Si3N4 film combined with the corner rounding of bump/RDL structures could mitigate Si3N4 film cracks. Voids induced by the fine pitch configuration of the top Al increase the potential risk of Si3N4 cracks during chip packaging. The reflow temperature is a major factor increasing the thermal stress in RDL patterns rather than from the bump structure. A high temperature storage test applied to the Cu pillar/Sn-Ag capping was used to investigate the intermetallic compound growth, shear strength, and hardness.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor materials and devices · Electrostatic Discharge in Electronics · Integrated Circuits and Semiconductor Failure Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. V.P.H. Hu, M.L. Fan, P. Su, and C.T. Chuang, IEEE Trans. Electron Devices 62, 1710 (2005).10.1109/TED.2015.2412973 ↗
2. S.H. Rasouli, H.F. Dadgour, K. Endo, and H. Koike, IEEE Trans. Electron Devices 57, 2934 (2010).10.1109/TED.2010.2076374 ↗
3. M.H. Wong, K. Sasaki, A. Kuramata, S. Tamakoshi, and M. Higashiwaki, IEEE Electron Device Lett. 37, 212 (2016).10.1109/LED.2015.2512279 ↗
4. H.W. Yao, K.Y. Yiang, P. Justison, M. Rayasam, O. Aubel, and J. Poppe, Appl. Phys. 110, 073504 (2011).10.1063/1.3644972 ↗
5. C.J. Wilson, K. Croes, C. Zhao, T.H. Metzger, L. Zhao, G.P. Beyer, A.B. Horsfall, A.G. O’Neill, and Z. Tőkei, J. Appl. Phys. 106, 053524 (2009).10.1063/1.3212572 ↗
6. M.Y. Yan and K.N. Tu, Appl. Phys. Lett. 87, 261906 (2005).10.1063/1.2158030 ↗
7. A. Heryanto, K.L. Pey, Y.K. Lim, W. Liu, N. Raghavan, J. Wei, C.L. Gan, M.K. Lim, and J.B. Tan, J. Appl. Phys. 109, 013716 (2011).10.1063/1.3531393 ↗
8. W.J. Choi, E.C.C. Yeh, and K.N. Tu, J. Appl. Phys. 94, 5665 (2003).10.1063/1.1616993 ↗
9. H.Y. Hsiao and C. Chen, Appl. Phys. Lett. 90, 152105 (2007).10.1063/1.2721136 ↗
10. S.W. Liang, Y.W. Chang, and C. Chen, Appl. Phys. Lett. 88, 172108 (2006).10.1063/1.2198809 ↗
11. J.W. Jang, C.Y. Liu, P.G. Kim, K.N. Tu, A.K. Mal, and D.R. Frear, J. Mater. Res. 15, 1679 (2000).10.1557/JMR.2000.0242 ↗
12. L. Meinshausen, K. Weide-Zaage, and M. Petzold, IEEE 61st Electronic Components and Technology Conference (ECTC) (2011), pp. 1444–1451.
13. L. Wang, J. Wang, and F. Xiao, J. Electron. Packag. 141, 011003 (2019).10.1115/1.4041714 ↗
14. J.W. Shin, I. Kim, and Y.W. Choi, Microelectron. Reliab. 55, 432 (2015).10.1016/j.microrel.2014.10.007 ↗
15. M. Pharr, K. Zhao, Z. Suo, F.Y. Ouyang, and P. Liu, J. Appl. Phys. 110, 083716 (2011).10.1063/1.3656002 ↗
16. C.W. Chang, C.V. Thompson, C.L. Gan, K.L. Pey, W.K. Choi, and Y.K. Lim, Appl. Phys. Lett. 90, 193505 (2007).10.1063/1.2714315 ↗
17. K.M. Chen and T.S. Lin, J. Mater. Sci. Mater. Electron. 21, 278 (2010).10.1007/s10854-009-9905-4 ↗
18. C. Yang, L. Wang, K.H. Yu, J. Wang, F. Xiao, and W.Q. Zhang, J. Mater. Sci. Mater. Electron. 29, 16416 (2018).10.1007/s10854-018-9733-5 ↗
19. J.Y.H. Chia, B. Cotterell, and T.C. Chia, Mater. Sci. Eng. A 417, 259 (2006).10.1016/j.msea.2005.10.064 ↗
20. J.W. Kim, D.G. Kim, and S.B. Jung, Microelectron. Reliab. 46, 535 (2006).10.1016/j.microrel.2005.06.008 ↗
21. C.Y. Ho, Mater. Sci. Semicond. Process. 49, 1 (2016).10.1016/j.mssp.2016.02.020 ↗