Effects of Substrate Temperature on Structural and Optical Properties of Spray-Pyrolyzed Cu(Ga0.3In0.7)Se2 Thin Films on Polyimide Plastic Substrate
Source abstract
Abstract
Chalcopyrite copper indium gallium diselenide Cu(Ga0.3In0.7)Se2 films have been deposited on polyimide (PI) plastic substrate by chemical spray pyrolysis using different substrate temperatures in the range from 350°C to 395°C. The influence of substrate temperature on the structural and optical properties of the CIGS films was studied. High-resolution x-ray diffraction results revealed that the films exhibited chalcopyrite-type structure. The crystallite size of the films increased with increasing substrate temperature, as did their root-mean-square surface roughness. Optical transmission measurements by ultraviolet–visible (UV–Vis) spectrophotometer showed that the optical bandgap decreased from 1.28 eV to 1.16 eV as the substrate temperature was increased. This variation of the crystallite size and energy bandgap with substrate temperature makes such films a promising candidate for application in optoelectronic devices such as photoconductors and solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Phase-change materials and chalcogenides · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. H.W. Hillhouse and M.C. Beard, Curr. Opin. Colloid Interface Sci. 14, 245 (2009).10.1016/j.cocis.2009.05.002 ↗
2. J.E. Jaffe and A. Zunger, Phys. Rev. B 29, 1882 (1984).10.1103/PhysRevB.29.1882 ↗
3. M.G. Faraj, K. Ibrahim, and A. Salhin, Mater. Sci. Semicond. Proc. 15, 206 (2012).10.1016/j.mssp.2012.03.002 ↗
4. M.L. Chenene and V. Alberts, J. Phys. D Appl. Phys. 36, 56 (2003).10.1088/0022-3727/36/1/308 ↗
5. T. Wada, Y. Matsuo, S. Nomura, Y. Nakamura, A. Miyamura, Y. Chiba, A. Yamada, and M. Konagai, Phys. Status Solidi A 203, 2593 (2006).10.1002/pssa.200669652 ↗
6. R.N. Bhattacharya, J.F. Hiltner, W. Batchelor, M.A. Contreras, R.N. Noufi, and J.R. Sites, Thin Solid Films 361–362, 396 (2000).10.1016/S0040-6090(99)00809-3 ↗
7. A. Bouloufa, K. Djessas, and D. Todorovic, Mater. Sci. Semicond. Proc. 12, 82 (2009).10.1016/j.mssp.2009.07.010 ↗
8. J. Piekoszewski, J.J. Loferski, R. Beaulieu, J. Beall, B. Roessler, and J. Shewchun, Sol. Energy Mater. 2, 363 (1980).10.1016/0165-1633(80)90012-X ↗
9. M. Venkatachalam, M.D. Kannan, N. Muthukumarasamy, S. Prasanna, S. Jayakumar, R. Balasundaraprabhu, and M. Saroja, Sol. Energy 83, 1652 (2009).10.1016/j.solener.2009.06.003 ↗
10. S. Shirakata, Y. Kannaka, H. Hasegawa, T. Kariya, and S. Isomura, Jpn. J. Appl. Phys. 38, 4997 (1999).10.1143/JJAP.38.4997 ↗
11. S. Kumar, T.P. Sharma, M. Zulfequar, and M. Husain, Phys. B: Condens. Matter 325, 8 (2003).10.1016/S0921-4526(02)01272-3 ↗
12. H.H. Afifi, S.A. Mahmoud, and A. Ashour, Thin Solid Films 263, 248 (1995).10.1016/0040-6090(95)06565-2 ↗
13. B.J. Babu, S. Velumani, B.J. Simonds, R.K. Ahrenkiel, A. Kassiba, and R. Asomoza, Mater. Sci. Semicond. Proc. 37, 37 (2015).10.1016/j.mssp.2015.01.002 ↗
14. B.J. Brown and C.W. Bates Jr., Thin Solid Films 188, 301 (1990).10.1016/0040-6090(90)90292-L ↗
15. B.J. Babu, S. Velumani, A. Kassiba, R. Asomoza, J.A. Chavez-Carvayar, and J. Yi, Mater. Chem. Phys. 162, 59 (2015).10.1016/j.matchemphys.2015.05.001 ↗
16. M.Z. Pakhuruddin, K. Ibrahim, and A. Abdul Aziz, Optoelectron. Adv. Mater 7, 377 (2013).
17. M.Z. Pakhuruddin, K. Ibrahim, and A. Abdul Aziz, Adv. Mater. Res. 620, 474 (2013).10.4028/www.scientific.net/AMR.620.474 ↗
18. B. Grzeta-Plenkovic, S. Popovic, B. Celustka, and B. Santic, J. Appl. Crystallogr. 13, 311 (1980).10.1107/S0021889880012149 ↗
19. L.S. Birks and H. Friedman, J. Appl. Phys. 17, 687 (1946).10.1063/1.1707771 ↗
20. D. Bhattacharyya, S. Chaudhuri, and A.K. Pal, Mater. Chem. Phys. 40, 44 (1995).10.1016/0254-0584(94)01453-N ↗
21. S.Z. Abbas, A.A. Aboud, M. Irfan, and S. Alam, IOP Conf. Ser. Mater. Sci. Eng. 60, 012058 (2013).10.1088/1757-899X/60/1/012058 ↗
22. M.G. Faraj and H.D. Omar, Aro Sci. J. Koya Univ. 2, 11 (2014).
23. F.-J. Haug, Z.S. Geller, H. Zogg, A.N. Tiwari, and C. Vignali, J. Vac. Sci. Technol. A 19, 171 (2001).10.1116/1.1329121 ↗
24. J. Tauc, Amorphous and Liquid Semiconductors (New York: Springer, 1974).10.1007/978-1-4615-8705-7 ↗
25. B. Pamplin and R.S. Feigelson, Thin Solid Films 60, 141 (1979).10.1016/0040-6090(79)90184-6 ↗
26. Y. Vijayakumar, K.N. Reddy, A.V. Moholkar, and M.V.R. Reddy, Mater. Technol. 49, 371 (2015).