journal article·2019-11

Anode-Side Failure of a Cuprous Oxide Semiconductor Caused by High-Density Current Loading

Takeshi Moriwaki, Kazuhiko Sasagawa, Yusuke Sugawara, Kazuhiro Fujisaki, Takahiro Mineta

Journal of Electronic Materials· Volume 48· Issue 11
Publisher page

Abstract

Cuprous oxide (Cu2O) is widely used in thin-film transistors as a p-type semiconductor material, and Cu2O nanowire studies have been actively conducted to enhance device performance and facilitate further scaling down. As scaling down progresses, the device line failure arising from electromigration becomes a constant challenge; however, the characteristics of Cu2O under high-density current have not yet been investigated. Hence, this study performed current loading tests on Cu2O specimens. Dumbbell shaped specimens were fabricated through Cu sputtering, photolithography, and thermal oxidation processes. The main component of the specimen was nanocrystalline Cu2O according to the x-ray diffraction measurement. The relatively high-potential drop specimen often failed at the middle region of the straight section during 1.0 MA/cm2 current loading. The middle-region failure was thought to be the result of the line degradation caused by Joule heating. In contrast, the relatively low-potential drop specimen often failed at the anode-side region because the cross-section area increased at the cathode and middle regions and decreased at the anode regions during current loading. In the usual electromigration phenomenon, atomic transport occurs from the cathode to the anode side; therefore, a lack of atoms can occur on the cathode side. Anode-side failures occurred likely because of the change of nanocrystalline Cu2O to coarse grained material at the middle region from Joule heating during current loading and the difference in atom transportability between the middle region and both end regions of the straight section of the specimen.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor materials and devices · Copper-based nanomaterials and applications · ZnO doping and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. H.A. Al-Jawhari, J.A. Caraveo-Frescas, and M.N. Hedhili, J. Electron. Mater. 44, 117 (2015).10.1007/s11664-014-3504-8 ↗
2. Y. Nishi, T. Miyata, and T. Minami, Sol. Energy Mater. Sol. Cells 155, 405 (2016).10.1016/j.solmat.2016.06.013 ↗
3. A. Stoesser, F. von Seggern, S. Purohit, B. Nasr, R. Kruk, S. Dehm, D. Wang, H. Hahn, and S. Dasgupta, Nanotechnology 27, 415205 (2016).10.1088/0957-4484/27/41/415205 ↗
4. V. Figueiredo, J.V. Pinto, J. Deuermeier, R. Barros, E. Alves, R. Martins, and E. Fortunato, J. Disp. Technol. 9, 735 (2013).10.1109/JDT.2013.2247025 ↗
5. S. Dolai, S. Das, S. Hussain, R. Bhar, and A.K. Pal, Vacuum 141, 296 (2017).10.1016/j.vacuum.2017.04.033 ↗
6. X. Zou, G. Fang, L. Yuan, M. Li, W. Guan, and X. Zhao, IEEE Electron Device Lett. 31, 827 (2010).10.1109/LED.2010.2050576 ↗
7. H. Nagai, T. Suzuki, H. Hara, C. Mochizuki, I. Takano, T. Honda, and M. Sato, Mater. Chem. Phys. 137, 252 (2012).10.1016/j.matchemphys.2012.09.016 ↗
8. Z. Li and Z. Zhang, Nano Res. 11, 1530 (2018).10.1007/s12274-017-1769-y ↗
9. K. Sasagawa, M. Hasegawa, M. Saka, and H. Abé, J. Appl. Phys. 91, 1882 (2002).10.1063/1.1432120 ↗
10. T. Sasaki, Y. Li, and M. Saka, Microsyst. Technol. 24, 3907 (2018).10.1007/s00542-018-3878-2 ↗
11. K. Sasagawa, M. Hasegawa, M. Saka, and H. Abé, J. Appl. Phys. 91, 9005 (2002).10.1063/1.1475354 ↗
12. X. Zhao, M. Muraoka, and M. Saka, J. Electron. Mater. 46, 1287 (2017).10.1007/s11664-016-5093-1 ↗
13. M. Nasir Bashir, A.S.M.A. Haseeb, A.Z.M.S. Rahman, M.A. Fazal, and C.R. Kao, J. Mater. Sci. 50, 6748 (2015).10.1007/s10853-015-9230-7 ↗
14. X. Xu, Y. Lu, C. Tang, Q. Sun, and F. Huang, Mater. Lett. 225, 21 (2018).10.1016/j.matlet.2018.04.067 ↗
15. S. Sato, K. Fujisaki, and K. Sasagawa, Mech. Eng. J. 3, 16-00292 (2016).10.1299/mej.16-00292 ↗
16. J.Y. Park, D.I. Moon, M.L. Seol, C.H. Jeon, G.J. Jeon, J.W. Han, C.K. Kim, S.J. Park, H.L. Lee, and Y.K. Choi, Sci. Rep. 6, 19314 (2016).10.1038/srep19314 ↗
17. A. Nie, J. Liu, C. Dong, and H. Wang, Nanotechnology 22, 405703 (2011).10.1088/0957-4484/22/40/405703 ↗
18. L.H. Qian, Q.H. Lu, W.J. Kong, and K. Lu, Scr. Mater. 50, 1407 (2004).10.1016/j.scriptamat.2004.02.026 ↗
19. H.A. Al-Jawhari, Mater. Sci. Semicond. Process. 40, 241 (2015).10.1016/j.mssp.2015.06.063 ↗
20. W. Jeong, K. Kim, Y. Kim, W. Lee, and P. Reddy, Sci. Rep. 4, 4975 (2014).10.1038/srep04975 ↗
21. B. Li, T.D. Sullivan, T.C. Lee, and D. Badami, Microelectron. Reliab. 44, 365 (2003).10.1016/j.microrel.2003.11.004 ↗