Determining the Cost of Organic Photovoltaic Material and Its Impact on the Levelized Cost of Electricity
Source abstract
Abstract
Abstract The field of organic photovoltaics (OPV) has delivered significant performance increases through the development of donor polymers and non-fullerene acceptors (NFAs). However, these improvements have come at the expense of increased synthetic complexity, reduced scalability, and consequently higher cost. By contrast, the development of commercial OPV technology requires scalable donor–acceptor materials, which can achieve a competitive levelized cost of electricity (LCOE). As such, if OPV technology is to become commercially viable, synthetic accessibility, quantification of cost, and active layer contribution to LCOE need to be considered. This paper presents three case studies examining the cost of materials (COM) for two polymer donors (poly[(2,6-(4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)-benzo[1,2-b:4,5-b′]dithiophene))-alt-(5,5-(1′,3′-di-2-thienyl-5′,7′-bis(2-ethylhexyl)benzo[1′,2′-c:4′,5′-c′]dithiophene-4,8-dione))] (PBDB-T) and poly[2,2⁗-bis[[(2-butyloctyl)oxy]carbonyl][2,2′:5′,2″:5″,2‴-quaterthiophene]-5,5‴-diyl] (PDCBT)), and one non-fullerene acceptor (NFA) (3,9-bis(2-methylene-(3-(1,1-dicyanomethylene)-indanone))-5,5,11,11-tetrakis(4-hexylphenyl)-dithieno[2,3-d:2′,3′-d′]-s-indaceno[1,2-b:5,6-b′]dithiophene (ITIC)). Published synthesis procedures for these materials were investigated to determine laboratory-scale COM. This analysis revealed that the NFA was significantly more expensive (~five-fold) than the cheapest donor material. Consequently, the ITIC synthesis was experimentally optimized (ITIC-Exp), delivering a significant (~six-fold) reduction in COM. Finally, bulk-scale COM was calculated based on established cost scaling laws for speciality chemicals. The effect of laboratory- and bulk-scale COM upon the LCOE for OPV modules printed at commercial scale was determined. This work highlights the finding that, at laboratory scale, a COM of $60 g−1 represents a reasonable active layer cost benchmark for competitive LCOE. This study further reveals that at bulk scale, a highly competitive LCOE ($0.13–$0.08) is achievable for the optimal donor–acceptor pair (PDCBT-DArP:ITIC-Exp) at modest efficiency (3–5%) and lifetime (3–5 years).
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies · solar cell performance optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. K. Chong, X. Xu, H. Meng, J. Xue, L. Yu, W. Ma, and Q. Peng, Realizing 19.05% efficiency polymer solar cells by progressively improving charge extraction and suppressing charge recombination. Adv. Mater. 34, 2109516 (2022). https://doi.org/10.1002/adma.202109516.10.1002/adma.202109516 ↗
2. Z. Liao, D. Hu, H. Tang, P. Huang, R. Singh, S. Chung, K. Cho, M. Kumar, L. Hou, Q. Chen, W. Yu, H. Chen, K. Yang, Z. Kan, F. Liu, Z. Xiao, G. Li, and S. Lu, 18.42% efficiency polymer solar cells enabled by terpolymer donors with optimal miscibility and energy levels. J. Mater. Chem. A. 10, 7878 (2022). https://doi.org/10.1039/D1TA10644A.10.1039/D1TA10644A ↗
3. W. Peng, Y. Lin, S.Y. Jeong, Z. Genene, A. Magomedov, H.Y. Woo, C. Chen, W. Wahyudi, Q. Tao, J. Deng, Y. Han, V. Getautis, W. Zhu, T.D. Anthopoulos, and E. Wang, Over 18% ternary polymer solar cells enabled by a terpolymer as the third component. Nano Energy 92, 106681 (2022). https://doi.org/10.1016/j.nanoen.2021.106681.10.1016/j.nanoen.2021.106681 ↗
4. S. Zhang, X. Ma, C. Xu, W. Xu, S.Y. Jeong, H.Y. Woo, Z. Zhou, X. Zhang, and F. Zhang, Boosted efficiency over 18.1% of polymer solar cells by employing large extinction coefficients material as the third component. Macromol. Rapid Commun. 43, 2200345 (2022). https://doi.org/10.1002/marc.202200345.10.1002/marc.202200345 ↗
5. P.C. Dastoor and W.J. Belcher, How the west was won? A history of organic photovoltaics. Substantia 3, 99 (2019).
6. R. Søndergaard, M. Hösel, D. Angmo, T.T. Larsen-Olsen, and F.C. Krebs, Roll-to-roll fabrication of polymer solar cells. Mater. Today 15, 36 (2012). https://doi.org/10.1016/s1369-7021(12)70019-6.10.1016/s1369-7021(12)70019-6 ↗
7. J. Guo and J. Min, A cost analysis of fully solution-processed ITO-free organic solar modules. Adv. Energy Mater. 9, 1802521 (2019). https://doi.org/10.1002/aenm.201802521.10.1002/aenm.201802521 ↗
8. F. Machui, M. Hösel, N. Li, G.D. Spyropoulos, T. Ameri, R.R. Søndergaard, M. Jørgensen, A. Scheel, D. Gaiser, K. Kreul, D. Lenssen, M. Legros, N. Lemaitre, M. Vilkman, M. Välimäki, S. Nordman, C.J. Brabec, and F.C. Krebs, Cost analysis of roll-to-roll fabricated ITO free single and tandem organic solar modules based on data from manufacture. Energy Environ. Sci. 7, 2792 (2014). https://doi.org/10.1039/c4ee01222d.10.1039/c4ee01222d ↗
9. C.J. Mulligan, M. Wilson, G. Bryant, B. Vaughan, X. Zhou, W.J. Belcher, and P.C. Dastoor, A projection of commercial-scale organic photovoltaic module costs. Sol. Energy Mater. Sol. Cells 120, 9 (2014). https://doi.org/10.1016/j.solmat.2013.07.041.10.1016/j.solmat.2013.07.041 ↗
10. F. Li, F.R. Lin, and A.K.-Y. Jen, Current state and future perspectives of printable organic and perovskite solar cells. Adv. Mater. 36, 2307161 (2024). https://doi.org/10.1002/adma.202307161.10.1002/adma.202307161 ↗
11. B.A. Nieto-Díaz, A.F. Crossland, and C. Groves, A levelized cost of energy approach to select and optimise emerging PV technologies: The relative impact of degradation, cost and initial efficiency. Appl. Energy 299, 117302 (2021). https://doi.org/10.1016/j.apenergy.2021.117302.10.1016/j.apenergy.2021.117302 ↗
12. P. Zhu, C. Chen, J. Dai, Y. Zhang, R. Mao, S. Chen, J. Huang, and J. Zhu, Toward the commercialization of perovskite solar modules. Adv. Mater. 36, 2307357 (2024). https://doi.org/10.1002/adma.202307357.10.1002/adma.202307357 ↗
13. P.W. Hart and J.T. Sommerfeld, Cost estimation of specialty chemicals from laboratory-scale prices. Cost Eng. 39, 31 (1997).
14. C.J. Mulligan, C. Bilen, X. Zhou, W.J. Belcher, and P.C. Dastoor, Levelised cost of electricity for organic photovoltaics. Sol. Energy Mater. Sol. Cells 133, 26 (2015). https://doi.org/10.1016/j.solmat.2014.10.043.10.1016/j.solmat.2014.10.043 ↗
15. R. Po and J. Roncali, Beyond efficiency: scalability of molecular donor materials for organic photovoltaics. J. Mater. Chem. C. 4, 3677 (2016). https://doi.org/10.1039/C5TC03740A.10.1039/C5TC03740A ↗
16. A.S. Hart, T.R. Andersen, M.J. Griffith, A. Fahy, B. Vaughan, W.J. Belcher, and P.C. Dastoor, Roll-to-roll solvent annealing of printed P3HT : ICXA devices. RSC Adv. 9, 42294 (2019). https://doi.org/10.1039/C9RA08826A.10.1039/C9RA08826A ↗
17. M.J. Griffith, N.A. Cooling, B. Vaughan, K.M. O’Donnell, M.F. Al-Mudhaffer, A. Al-Ahmad, M. Noori, F. Almyahi, W.J. Belcher, and P.C. Dastoor, Roll-to-roll sputter coating of aluminum cathodes for large-scale fabrication of organic photovoltaic devices. Energ. Technol. 3, 428 (2015). https://doi.org/10.1002/ente.201402174.10.1002/ente.201402174 ↗
18. Y. Wang, W. Lan, N. Li, Z. Lan, Z. Li, J. Jia, and F. Zhu, Stability of nonfullerene organic solar cells: from built-in potential and interfacial passivation perspectives. Adv. Energy Mater. 9, 1900157 (2019). https://doi.org/10.1002/aenm.201900157.10.1002/aenm.201900157 ↗
19. W. Zhao, D. Qian, S. Zhang, S. Li, O. Inganäs, F. Gao, and J. Hou, Fullerene-free polymer solar cells with over 11% efficiency and excellent thermal stability. Adv. Mater. 28, 4734 (2016). https://doi.org/10.1002/adma.201600281.10.1002/adma.201600281 ↗
20. Y. Qin, M.A. Uddin, Y. Chen, B. Jang, K. Zhao, Z. Zheng, R. Yu, T.J. Shin, H.Y. Woo, and J. Hou, Highly efficient fullerene-free polymer solar cells fabricated with polythiophene derivative. Adv. Mater. 28, 9416 (2016). https://doi.org/10.1002/adma.201601803.10.1002/adma.201601803 ↗
21. J. Zhou, Y. Zuo, X. Wan, G. Long, Q. Zhang, W. Ni, Y. Liu, Z. Li, G. He, C. Li, B. Kan, M. Li, and Y. Chen, Solution-processed and high-performance organic solar cells using small molecules with a benzodithiophene unit. J. Am. Chem. Soc. 135, 8484 (2013). https://doi.org/10.1021/ja403318y.10.1021/ja403318y ↗
22. P. Chao, M. Guo, Y. Zhu, H. Chen, M. Pu, H.-H. Huang, H. Meng, C. Yang, and F. He, enhanced photovoltaic performance by synergistic effect of chlorination and selenophene π-bridge. Macromolecules 53, 2893 (2020). https://doi.org/10.1021/acs.macromol.0c00405.10.1021/acs.macromol.0c00405 ↗
23. D. Qian, L. Ye, M. Zhang, Y. Liang, L. Li, Y. Huang, X. Guo, S. Zhang, Z.A. Tan, and J. Hou, Design, application, and morphology study of a new photovoltaic polymer with strong aggregation in solution state. Macromolecules 45, 9611 (2012). https://doi.org/10.1021/ma301900h.10.1021/ma301900h ↗
24. M. Zhang, X. Guo, W. Ma, H. Ade, and J. Hou, A polythiophene derivative with superior properties for practical application in polymer solar cells. Adv. Mater. 26, 5880 (2014). https://doi.org/10.1002/adma.201401494.10.1002/adma.201401494 ↗
25. A. Bhuwalka, M.D. Ewan, M. Elshobaki, J.F. Mike, B. Tlach, S. Chaudhary, and M. Jeffries-EL, Synthesis and photovoltaic properties of 2,6-bis(2-thienyl) benzobisazole and 4,8-bis(thienyl)-benzo[1,2-B:4,5-B′]dithiophene copolymers. J. Polym. Sci., Part A: Polym. Chem. 54, 316 (2016). https://doi.org/10.1002/pola.27793.10.1002/pola.27793 ↗
26. C. Cui, X. Fan, M. Zhang, J. Zhang, J. Min, and Y. Li, A D-A copolymer of dithienosilole and a new acceptor unit of naphtho[2,3-c]thiophene-4,9-dione for efficient polymer solar cells. Chem. Commun. (Camb.) 47, 11345 (2011). https://doi.org/10.1039/c1cc14132e.10.1039/c1cc14132e ↗
27. Sonar, P., S.P. Singh, M. Siang, and S. Yuning Li, Ambipolar polymeric semiconductor materials and organic electronic devices. 2010, Agency for Science Technology and Research Singapore: United States. p. 61.
28. S.-Y. Jang, I.-B. Kim, Y. Kim, D.-H. Lim, H. Kang, M. Heeney, and D.-Y. Kim, Facile direct C-H arylation polymerization of conjugated polymer, PDCBT, for organic solar cells. Macromol. Rapid Commun. 43, 2200405 (2022). https://doi.org/10.1002/marc.202200405.10.1002/marc.202200405 ↗
29. T.P. Osedach, T.L. Andrew, and V. Bulović, Effect of synthetic accessibility on the commercial viability of organic photovoltaics. Energy Environ. Sci. 6, 711 (2013). https://doi.org/10.1039/C3EE24138F.10.1039/C3EE24138F ↗
30. Lazard, LCOE Lazard. 2023. p. 57.