journal article·2014-03

Architectured Materials to Improve the Reliability of Power Electronics Modules: Substrate and Lead-Free Solder

Abderrahmen Kaabi, Yves Bienvenu, David Ryckelynck, Bertrand Pierre

Journal of Electronic Materials· Volume 43· Issue 3
Publisher page

Abstract

Power electronics modules (>100 A, >500 V) are essential components for the development of electrical and hybrid vehicles. These modules are formed from silicon chips (transistors and diodes) assembled on copper substrates by soldering. Owing to the fact that the assembly is heterogeneous, and because of thermal gradients, shear stresses are generated in the solders and cause premature damage to such electronics modules. This work focuses on architectured materials for the substrate and on lead-free solders to reduce the mechanical effects of differential expansion, improve the reliability of the assembly, and achieve a suitable operating temperature ( 280 W m−1 K−1) and a macroscopic coefficient of thermal expansion intermediate between those of Cu and Si, as well as limited structural evolution in service conditions. An approach combining design, optimization, and manufacturing of new materials has been followed in this study, leading to improved thermal cycling behavior of the component.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Aluminum Alloys Composites Properties · 3D IC and TSV technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. R. Young et al., Developments and Trends in Thermal Management Technology—A Mission to the USA. DTI Global Watch Missions, USA, December 2006.
2. C. Zweben, Thermal Materials Solve Power Electronics Challenges. Power Electronics Technology, February 2006, pp. 40–47.
3. M.A. Occhionero et al., Proceedings, International Symposium on Advanced Packaging Materials, 1999, pp. 118–124.
4. D.L. Saums, Annual IEEE Semiconductor Thermal Measurement and Management Symposium, No. 20, IEEE, 2004, pp. 38–45.
5. M. Occhionero et al., Aluminum Silicon Carbide (AlSiC) for Advanced Microelectronic Packages. IMAPS, May 1998, p. 6.
6. F. Carpentier (PhD thesis, Mines-ParisTech, France, 1993).
7. C.T. Ho and D.D.L. Chung, J. Mater. Res. 5, 1266 (1990).10.1557/JMR.1990.1266 ↗
8. H. Mavoori and S. Jin, J. Electron. Mater. 27, 1216 (1998).10.1007/s11664-998-0072-9 ↗
9. T. Lienert, T. Siewert, S. Babu, and V. Acoff, ASM Handbook Vol. 6A. (ASM International, 2011), pp. 711–716.
10. R.L. O’Brien, Welding Handbook, Vol. 2, 8th ed., (Americain Welding Society, 1991), p. 772.
11. L. Long, N. Kotobu, and Y. Fuxing, Sci. Technol. Adv. Mater. 9, 11 (2008).
12. N. Bay, The Joining of Metals Practice and Performance, Vol. 2, avril 1981, Coventry, pp. 47–62.
13. V. Raghavan, J. Phase Equilib. Diffus. 25, 547 (2004).10.1007/s11669-004-0074-0 ↗
14. French Patent, Matériau composite multicouche utilisé pour la fabrication de substrats de modules électroniques et procédés de fabrication correspondant, Armines-LNE-Griset, No. 2951020, April 2011.
15. L. Gao et al., Microelectron. Eng. 87, 2025 (2010).
16. F. Tai, et al., Mater. Sci. Eng. 527, 3335 (2010).10.1016/j.msea.2010.02.048 ↗
17. F. Rosalbino, et al., Mater. Chem. Phys. 109, 386 (2008).10.1016/j.matchemphys.2007.12.006 ↗
18. J.W. Yoon and S.B. Jung, J. Alloy. Compd. 448, 177 (2008).10.1016/j.jallcom.2006.10.052 ↗
19. J.W. Yoon, B.I. Noh, and S.B. Jung, J. Alloy. Compd. 506, 331 (2010).10.1016/j.jallcom.2010.06.202 ↗
20. L.C. Tsao, J. Alloy. Compd. 509, 2326 (2011).10.1016/j.jallcom.2010.11.010 ↗
21. J.W. Yoon, W.C. Moon, and S.B. Jung, Microelectron. Eng. 83, 2329 (2006).10.1016/j.mee.2006.10.027 ↗
22. S.Y. Chang, Y.C. Huang, and Y.M. Lin, J. Alloy. Compd. 490, 508 (2010).10.1016/j.jallcom.2009.10.071 ↗
23. G.Q. Wu, Z.F. Li, G.X. Luo, and Z. Huang, Model. Simul. Mater. Sci. Eng. 16, 9 (2008).
24. A. Kaabi (PhD thesis, Mines-ParisTech, France, 2011).
25. K.F. Dreyer, W.K. Neils, R.R. Chromik, D. Grosman, and E.J. Cotts, Appl. Phys. Lett. 67, 2795 (1995).10.1063/1.114596 ↗
26. A. Gangulee, G.C. Das, and M.B. Bever, Metall. Trans. 4, 2063 (1973).10.1007/BF02643268 ↗
27. M. Onishi and H. Fujibuchi, Trans. Jpn. Inst. Mater. 116, 1122 (2000).
28. Z. Mei, A.J. Sunwoo, and J.W. Morris, Metall. Trans. A 23A, 857 (1992).10.1007/BF02675563 ↗
29. Y.G. Lee and J.G. Duh, J. Mater. Sci.: Mater. Electron. 10, 33 (1999).
30. R.J. Fields, S.R. Low III, and G.K. Lucey, Jr., The Metal Science of Joining, ed. M.J. Cieslak, J.H. Perepezko, S. Kang, and M.E. Glicksman (Warrendale, PA: TMS, 1992), pp. 165–173.
31. R.J. Fields and S.R. Low, Metal Science of Joining, Proceedings of TMS Symposium, Cincinnati, Oct 1991.
32. L.R. Vaidyanath and D.R. Milner, Br. Weld. J. 7, 1 (1960).
33. L.R. Vaidyanath, M.G. Nicholas, and D.R. Milner, Br. Weld. J. 6, 13 (1959).
34. D.R. Milner and G.W. Rowe, Metall. Rev. 7, 433 (1962).10.1179/mtlr.1962.7.1.433 ↗
35. J.A. Cave and J.D. Williams, J. Inst. Met. 101, 203 (1973).