A Composition-Dependent Unified Analytical Model for Quaternary InAlGaN/GaN HEMTs for pH Sensing
Source abstract
Abstract
Group III–V material alloys such as gallium nitride (GaN) with piezoelectric and pyroelectric properties are used for designing advanced devices suitable for harsh surroundings such as high temperature and acidic ambience. In the present paper, we introduce a unified model using InAlGaN quaternary alloy in the barrier layer to analyze the performance of pH sensors based on high electron-mobility transistors (HEMTs) Our model is used to accurately calculate the threshold voltage, the sheet charge concentration and thus the drain current, in response to changes in the pH values of the electrolyte put in the gate area of the InAlGaN/GaN heterostructure based sensor. We have taken three devices for our studies with varying In mole fraction from 0% to 16% and Al mole fraction from 23% to 74%. The sensitivity of a HEMT based pH sensor depends on its transconductance. The maximum transconductance values of the InAlGaN/GaN devices were found to be much higher than those of the AlGaN/GaN HEMT devices. A theoretical sensitivity of 1.3 mA/pH was achieved for the quaternary structures. Our model shows good agreement with the experimental data available in literature, presenting less than 1.2% root mean square error in almost all the devices. We observe that HEMTs based on the InAlGaN/GaN structures have better sensitivity than the AlGaN/GaN structures in pH sensing applications. Our findings may be used in designing quaternary HEMT based novel pH sensors.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: GaN-based semiconductor devices and materials · Gas Sensing Nanomaterials and Sensors · ZnO doping and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. L. Manjakkal, D. Szwagierczak, and R. Dahiya, Prog. Mater. Sci. 109, 100635 (2020).10.1016/j.pmatsci.2019.100635 ↗
2. S. Taheri, Constr. Build Mater. 204, 492 (2019).10.1016/j.conbuildmat.2019.01.172 ↗
3. M. Singh, R.S. Patkar, M. Vinchurkarand, and M.S. Baghini, IEEE Sens. J. 20, 47 (2019).10.1109/JSEN.2019.2941695 ↗
4. O. Korostynska, K. Arshak, E. Gill, and A. Arshak, IEEE Sens. J. 8, 20 (2007).10.1109/JSEN.2007.912522 ↗
5. L. Manjakkal, S. Dervinand, and R. Dahiya (2020) RSC Adv.; 10(15):859410.1039/D0RA00016G ↗
6. Q. Cheng, M. Wang, M. Tao, R. Yin, Y. Li, N. Yang, W. Xu, C. Gao, Y. Hao, and Z. Yang, IEEE Electr. Device L 41, 485 (2020).10.1109/LED.2020.2967631 ↗
7. M.I. Khan, K. Mukherjee, R. Shoukat, and H. Dong, Microsyst . Technol. 23, 4391 (2017).10.1007/s00542-017-3495-5 ↗
8. M.T. Ghoneim, A. Nguyen, N. Dereje, J. Huang, G.C. Moore, P.J. Murzynowski, and C. Dagdeviren, Chem. Rev. 119, 5248 (2019).10.1021/acs.chemrev.8b00655 ↗
9. C. Zhang, P. Zhang, X. Ma and J. Shi, 2nd International Conference on Frontiers of Sensors Technologies (ICFST)IEEE (2017), pp. 95-98.
10. S. J. Pearton, F. Ren and B. H. Chu, in State of the Art in Biosensors: Environmental and Medical Applications, ed. by Toonika Rinken, (IntechOpen 2013), pp-2287.
11. S.Turuvekere, N. Karumuri, A. Azizur Rahman, A. Bhattacharya, A. D. Gupta, and N. D. Gupta, IEEE Trans. Electron. Dev. 60(10), 3157 (2013).10.1109/TED.2013.2272700 ↗
12. M. Stutzmann, G. Steinhoff, M. Eickhoff, O. Ambacher, C. E. Nebel, J. Schalwig, R. Neuberger and G. Müller, Diam Relat. Mater. 11(3-6), 886 (2002).10.1016/S0925-9635(02)00026-2 ↗
13. R. Mehandru, B. Luo, B.S. Kang, J.H. Kim, F. Ren, S.J. Pearton, and J.I. Chyi, Solid State Electron. 48, 351 (2004).10.1016/S0038-1101(03)00318-6 ↗
14. T. Kokawa, T. Sato, H. Hasegawa and T. Hashizume, J. Vac. Sci. Technol. B 24 (4), 1972 (2006).10.1116/1.2214701 ↗
15. M.S.Z. Abidin, A.M. Hashim, M.E. Sharifabad, S. Fadzli, A. Rahman, and T. Sadoh, Sensors 11, 3067 (2011).10.3390/s110303067 ↗
16. J.Y. Pyo, J.H. Jeon, Y. Koh, C.Y. Cho, H.H. Park, K.H. Park, S.W. Lee, and W.J. Cho, AIP Adv. 8, 085106 (2018).10.1063/1.5041847 ↗
17. Y. Dong, D.H. Son, Q. Dai, J.H. Lee, C.H. Won, J.G. Kim, D. Chen, J.H. Lee, H. Lu, R. Zhang, and Y. Zheng, Sensors 18, 1314 (2018).10.3390/s18051314 ↗
18. I. Sanyal, Y.C. Lee, Y.C. Chen, and J.I. Chyi, Appl. Phys. Lett. 114, 222103 (2019).10.1063/1.5090874 ↗
19. N. M. Shrestha, C. H. Chen, Z. M. Tsai, Y. Li, J. H. Tarng and S. Samukawa, in IEEE International Conference on Simulation of Semiconductor Processes and Devices (SISPAD), (2019), pp 1-4.
20. F.G. McIntosh, K.S. Boutros, J.C. Roberts, S.M. Bedair, E.L. Piner, and N.A. El Masry, Appl. Phys. Lett. 68, 40 (1996).10.1063/1.116749 ↗
21. E.L. Piner, F.G. McIntosh, J.C. Roberts, M.E. Aumer, V.A. Joshkin, S.M. Bedair, and N.A. El-Masry, MRS Internet J N S R 1, 43 (1996).
22. N. Ketteniss, L. Rahimzadeh Khoshroo, M. Eickelkamp, M. Heuken, H. Kalisch, R.H. Jansen, and A. Vescan (2010) Semicond. Sci. Technol.; 25(7): 07501310.1088/0268-1242/25/7/075013 ↗
23. J.H. Hwang, S.M. Kim, J.M. Woo, S.M. Hong, and J.H. Jang, Phys. Status Solidi A 213, 889 (2016).10.1002/pssa.201532566 ↗
24. E. Dogmus, R. Kabouche, S. Lepilliet, A. Linge, M. Zegaoui, H. Ben-Ammar, M.P. Chauvat, P. Ruterana, P. Gamarra, C. Lacam, and M. Tordjman, Electronics 5, 31 (2016).10.3390/electronics5020031 ↗
25. L. Ravi, and B. Krishnan, Optik 178, 66 (2019).10.1016/j.ijleo.2018.10.021 ↗
26. A. Minj, D. Skuridina, D. Cavalcoli, A. Cros, P. Vogt, M. Kneissl, C. Giesen, and M. Heuken, Mater. Sci. Semicond. Process. 55, 26 (2016).10.1016/j.mssp.2016.04.005 ↗
27. M. Bayer, C. Uhl, and P. Vogl, J. Appl. Phys. 97, 033703 (2005).10.1063/1.1847730 ↗
28. M. Sciullo, M. Choudhury, E. Patrick, and M.E. Law, ECS Trans. 75, 259 (2016).10.1149/07516.0259ecst ↗
29. S. Rabbaa, and J. Stiens, J. Phys. D Appl. Phys. 45, 475101 (2012).10.1088/0022-3727/45/47/475101 ↗
30. R. Anvari, D. Spagnoli, G.A. Umana-Membreno, G. Parish, and B. Nener, Appl. Surf. Sci. 452, 75 (2018).10.1016/j.apsusc.2018.04.250 ↗
31. D. Godwinraj, H. Pardeshi, S.K. Pati, N. Mohankumar, and C.K. Sarkar, Superlattices Microstruct. 54, 188 (2013).10.1016/j.spmi.2012.11.020 ↗
32. H.R. Mojaver, F. Manouchehri, and P. Valizadeh, J. Appl. Phys. 119, 154502 (2016).10.1063/1.4946842 ↗
33. Y. Li, J. Zhang, W. Wan, Y. Zhang, Y. Nie, J. Zhang, and Y. Hao, Physica E 67, 77 (2015).10.1016/j.physe.2014.11.009 ↗
34. Y. Li, J. Zhang, G. Liu, R. Quan, X. Duan, J. Zhang, and Y. Hao, AIP Adv. 7, 105109 (2017).10.1063/1.4985825 ↗
35. K.T. Upadhyay, and M.K. Chattopadhyay, Mater. Today-Proc. 19, 205 (2019).10.1016/j.matpr.2019.06.700 ↗
36. G. Parish, F.L.M Khir, N... Radha Krishnan, J. Wang, J.S. Krisjanto, H. Li, G.A. Umana-Membreno, S. Keller, UK Mishra, M.V. Baker, B.D. Nener, and M. Myers (2019) Sensor Actuat B-Chem. 287, 250 (2019).10.1016/j.snb.2019.02.039 ↗
37. H. Zhang, J. Tu, S. Yang, K. Sheng, and P. Wang, Talanta 205, 120134 (2019).10.1016/j.talanta.2019.120134 ↗
38. P. Murugapandiyan, A. Mohanbabu, V.R. Lakshmi, M. Wasim, and M. Sundaram, Journal of Elec Materi 49, 524 (2020).10.1007/s11664-019-07731-4 ↗
39. F.M. Yigletu, S. Khandelwal, T.A. Fjeldly, and I. Benjamín, IEEE Trans. Electron Devices 60, 3746 (2013).10.1109/TED.2013.2283525 ↗
40. N.S. Swamy, and A.K. Dutta, IEEE T Electron Dev. 65, 936 (2018).10.1109/TED.2018.2794460 ↗
41. R. Narang, M. Saxena, and M. Gupta, IEEE Trans. Electron Devices 64, 1742 (2017).10.1109/TED.2017.2668520 ↗
42. Y. Xu, and M.A. Schoonen, Am. Mineral. 85, 543 (2000).10.2138/am-2000-0416 ↗
43. M. Kosmulski, J Colloid Interface Sci. 238, 225 (2001).10.1006/jcis.2001.7484 ↗
44. K.T. Upadhyay, and M.K. Chattopadhyay, Mater. Scie. Eng.: B, 263, 114849 (2021).10.1016/j.mseb.2020.114849 ↗