Design, Modeling, Fabrication, and Evaluation of Thermoelectric Generators with Hot-Wire Chemical Vapor Deposited Polysilicon as Thermoelement Material
Source abstract
Abstract
This paper presents the design, modeling, fabrication, and evaluation of thermoelectric generators (TEGs) with p-type polysilicon deposited by hot-wire chemical vapor deposition (HWCVD) as thermoelement material. A thermal model is developed based on energy balance and heat transfer equations using lumped thermal conductances. Several test structures were fabricated to allow characterization of the boron-doped polysilicon material deposited by HWCVD. The film was found to be electrically active without any post-deposition annealing. Based on the tests performed on the test structures, it is determined that the Seebeck coefficient, thermal conductivity, and electrical resistivity of the HWCVD polysilicon are 113 μV/K, 126 W/mK, and 3.58 × 10−5 Ω m, respectively. Results from laser tests performed on the fabricated TEG are in good agreement with the thermal model. The temperature values derived from the thermal model are within 2.8% of the measured temperature values. For a 1-W laser input, an open-circuit voltage and output power of 247 mV and 347 nW, respectively, were generated. This translates to a temperature difference of 63°C across the thermoelements. This paper demonstrates that HWCVD, which is a cost-effective way of producing solar cells, can also be applied in the production of TEGs. By establishing that HWCVD polysilicon can be an effective thermoelectric material, further work on developing photovoltaic-thermoelectric (PV-TE) hybrid microsystems that are cost-effective and better performing can be explored.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal Radiation and Cooling Technologies · Thermal properties of materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Y. Dengand and J. Liu, J. Renew. Sust. Energy (2009). doi: 10.1063/1.3212675 .
2. M. Strasser, R. Aigner, C. Lauterbach, T. Sturm, M. Franosch, and G. Wachutka, Sensor. Act. A-Phys. (2004). doi: 10.1016/j.sna.2003.11.039 .
3. K. Matsubara and M. Matsuura, Thermoelectric Handbook: Macro to Nano, ed. D.M. Rowe (Florida: CRC, 2006).
4. N. Savage, IEEE Spectr. (2011). doi: 10.1109/MSPEC.2011.5960150 .
5. I. Tobias and A. Luque, IEEE T. Electron. Dev. (2002). doi: 10.1109/TED.2002.804731 .
6. Y. Dai, R. Wang, and L. Ni, Sol. Energy Mater. Sol. Cells (2003). doi: 10.1016/S0140-6701(03)92673-7 .
7. D. Kraemer, L. Hu, A. Muto, X. Chen, G. Chen, and M. Chiesa, Appl. Phys. Lett. (2008). doi: 10.1063/1.2947591 .
8. P. Bermel, M. Ghebrebrhan, W. Chan, Y. Yeng, M. Araghchini, R. Hamam, and C. Marton, et al., Opt. Express (2010). doi: 10.1364/OE.18.00A314 .
9. H. Chang, M. Kao, K. Huang, S. Chen, and Z. Yu, Jpn. J. Appl. Phys. (2010). doi: 10.1143/JJAP.49.06GG08 .
10. M. Fisac, F. Villasevil, and A. Lopez, J. Power Sources (2014). doi: 10.1016/j.jpowsour.2013.11.121 .
11. L. Tayebi, Z. Zamanipour, and D. Vashaee, Renew. Energy (2014). doi: 10.1016/j.renene.2014.02.055 .
12. J. Rath, Sol. Energy Mater. Sol. Cells (2003). doi: 10.1016/S0927-0248(02)00258-1 .
13. R. Iiduka, A. Heya, and H. Matsumura, Sol. Energy. Mater. Sol. Cells (1997). doi: 10.1016/S0927-0248(97)00112-8 .
14. A. Pant, T. Russell, M. Huff, R. Aparicio, and R. Birkmire, Ind. Eng. Chem. Res. (2001). doi: 10.1021/ie000423+ .
15. R. Schropp, Thin Solid Films (2004). doi: 10.1016/j.tsf.2003.10.126 .
16. M. Strasser, R. Aigner, C. Lauterbach, T. Sturm, M. Franosch, and G. Watchuka, Sensor. Act. A-Phys. (2004). doi: 10.1016/j.sna.2003.11.039 .
17. J. Welty, C. Wicks, R. Wilson, and G. Rorrer, in Fundamentals of Momentum, Heat, and Mass Transfer, 5th ed. (New York: Wiley, 2008).
18. E. Weisstein, Quartic Equation. (MathWorld—A Wolfram␣Web Resource), http://mathworld.wolfram.com/QuarticEquation.html . Accessed Oct 2013.
19. P. Dziurdzia and A. Mirocha, International Conference on Mixed Design of Integrated Circuits and Systems (2009).
20. M. Chen, L. Rosendahl, I. Bach, T. Condra, and J. Pederson, International Conference on Thermoelectrics (2006).
21. G. Fraisse, J. Ramousse, D. Sgorlon, and C. Goupil, Energy Convers. Manage. (2013). doi: 10.1016/j.enconman.2012.08.022 .
22. M. Cernaianu and A. Gontean, IET Circuits Dev. Syst. (2013). doi: 10.1049/iet-cds.2012.0227 .
23. Nitor 301, http://www.echerkon.co.uk/files/Echerkon%20Nitor%20301.pdf . Accessed Mar 2014.
24. HL 5500, http://www.nanometrics.com/products/HL5500.2html . Accessed Mar 2014.
25. J. Xie, C. Lee, M. Wang. Y. Liu, and H. Feng, J. Micromech. Microeng. (2009). doi: 10.1088/0960-1317/19/12/125029 .10.1088/0960-1317/19/12/125029 ↗
26. L. van der Pauw, Philips Res. Repts. 13, 1–9 (1958).