journal article·2021-11

A Statistical Study of Assembly Parameter Modifications Effects on the Photovoltaic Response of Dye-Sensitized Solar Cells

Vitor Goetzke, Cátia Liane Ücker, Luciano Timm Gularte, Cristian Dias Fernandes, Mário Lúcio Moreira, Sergio da Silva Cava, Pedro Lovato Gomes Jardim, Rubens Camaratta, Cristiane Wienke Raubach

Journal of Electronic Materials· Volume 50· Issue 11
Publisher page

Abstract

Strategies for improving the performance of solar cells have been the focus of several researchers. The evaluation of the effects resulting from the variation in assembly parameters was the approach adopted in this study. Three construction parameters of a dye-sensitized solar cell were varied, and an experimental factorial design method was used to analyze these modifications simultaneously, verifying the photovoltaic results. The modifications were conducted for the semiconductor area (Factor A), substrate area (Factor B), and semiconductor composition (Nb2O5 with/without TiO2) (Factor C). The curves of the current density versus voltage (J–V) were analyzed to evaluate the effects of the variations of each parameter and their combined interactions. The change related to the semiconductor composition (Factor C) was statistically significant, being relevant to improve the photovoltaic parameters evaluated. The current density, on average, increased 93.12% in the cells with the change in the semiconductor composition. Similarly, the average increase in open-circuit voltage in the respective cells was 28.71%. The reason that Factor C was predominant was attributed to the uniformity of the semiconductor layer observed by results of scanning electron microscopy (SEM).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · Transition Metal Oxide Nanomaterials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. R. Ghosh, M.K. Brennaman, T. Uher, M.-R. Ok, E.T. Samulski, L.E. McNeil, T.J. Meyer, and R. Lopez, ACS Appl. Mater. Interfaces 3, 3929 (2011).10.1021/am200805x ↗
2. A.K. Pandey, V.V. Tyagi, J.A. Selvaraj, N.A. Rahim, and S.K. Tyagi, Renew. Sustain. Energy Rev. 53, 859 (2016).10.1016/j.rser.2015.09.043 ↗
3. J. Jiu, S. Isoda, F. Wang, and M. Adachi, J. Phys. Chem. B 110, 2087 (2006).10.1021/jp055824n ↗
4. V. Sivakov, G. Andrä, A. Gawlik, A. Berger, J. Plentz, F. Falk, S.H. Christiansen, and D. Jena, NANO 9, 1549 (2009).
5. C. Wadia, A.P. Alivisatos, and D.M. Kammen, Environ. Sci. Technol. 43, 2072 (2009).10.1021/es8019534 ↗
6. L.T. Gularte, C.D. Fernandes, M.L. Moreira, C.W. Raubach, P.L.G. Jardim, and S.S. Cava, Sol. Energy 198, 658 (2020).10.1016/j.solener.2020.01.052 ↗
7. B. O’Regan, and M. Grätzel, Nature 353, 737 (1991).10.1038/353737a0 ↗
8. S.G. Chen, S. Chappel, Y. Diamant, and A. Zaban, Chem. Mater. 13, 4629 (2001).10.1021/cm010343b ↗
9. S. Ito, T.N. Murakami, P. Comte, P. Liska, C. Grätzel, M.K. Nazeeruddin, and M. Grätzel, Thin Solid Films 516, 4613 (2008).10.1016/j.tsf.2007.05.090 ↗
10. K.G. Reddy, T.G. Deepak, G.S. Anjusree, S. Thomas, S. Vadukumpully, K.R.V. Subramanian, S.V. Nair, and A.S. Nair, Phys. Chem. Chem. Phys. 16, 6838 (2014).10.1039/c3cp55448a ↗
11. A. Hagfeldt, G. Boschloo, L. Sun, L. Kloo, and H. Pettersson, Chem. Rev. 110, 6595 (2010).10.1021/cr900356p ↗
12. E. Ramasamy, W.J. Lee, D.Y. Lee, and J.S. Song, J. Power Sources 165, 446 (2007).10.1016/j.jpowsour.2006.11.057 ↗
13. M. Ye, X. Wen, M. Wang, J. Iocozzia, N. Zhang, C. Lin, and Z. Lin, Mater. Today 18, 155 (2015).10.1016/j.mattod.2014.09.001 ↗
14. R. Escalante, D. Pourjafari, D. Reyes-Coronado, and G. Oskam, J. Renew. Sustain. Energy 8, 023704 (2016).10.1063/1.4944969 ↗
15. A. W. Putri, F. Nurosyid, and A. Supriyanto, Optimization of active cell area on the dye-sensitized solar cell efficiency, in Journal of Physics: Conference Series, vol 909, (2017)10.1088/1742-6596/909/1/012008 ↗
16. A. Mashreghi, and F.B. Moghadam, J. Solid State Electrochem. 20, 1361 (2016).10.1007/s10008-016-3133-7 ↗
17. M.-E. Yeoh, and K.-Y. Chan, J. Electron. Mater. 48, 4342 (2019).10.1007/s11664-019-07207-5 ↗
18. H. Yu, S. Zhang, H. Zhao, G. Will, and P. Liu, Electrochim. Acta 54, 1319 (2009).10.1016/j.electacta.2008.09.025 ↗
19. L. Chu, Z. Qin, W. Liu, and X. Ma, Appl. Surf. Sci. 389, 802 (2016).10.1016/j.apsusc.2016.07.078 ↗
20. L. Li, C. Xu, Y. Zhao, and K.J. Ziegler, Sol. Energy 132, 214 (2016).10.1016/j.solener.2016.03.018 ↗
21. T.L. Valerio, G.A.R. Maia, L.F. Gonçalves, A. Viomar, E. do P. Banczek, and P.R.P. Rodrigues, Mater. Res. 22, 1 (2019).10.1590/1980-5373-mr-2018-0864 ↗
22. S. Datta, A. Dey, N.R. Singha, and S. Roy, Mater. Renew. Sustain. Energy 9, 25 (2020).10.1007/s40243-020-00185-3 ↗
23. O.F. Lopes, V.R. de Mendonça, F.B.F. Silva, E.C. Paris, and C. Ribeiro, Quim. Nova 38, 106 (2014).
24. C.L. Ücker, L.T. Gularte, C.D. Fernandes, V. Goetzke, E.C. Moreira, C.W. Raubach, M.L. Moreira, and S.S. Cava, J. Am. Ceram. Soc. 102, 1884 (2019).10.1111/jace.16080 ↗
25. C.L. Ücker, V. Goetzke, F.C. Riemke, M.L. Vitale, L.R.Q. de Andrade, M.D. Ücker, E.C. Moreira, M.L. Moreira, C.W. Raubach, and S.S. Cava, J. Mater. Sci. 56, 7889 (2021).10.1007/s10853-021-05770-z ↗
26. F.Z. Kessaissia, A. Zegaoui, M. Aillerie, M. Arab, M. Boutoubat, and C. Fares, Energy Rep. 6, 299 (2020).10.1016/j.egyr.2019.11.016 ↗
27. S.L.C. Ferreira, V.A. Lemos, V.S. de Carvalho, E.G.P. da Silva, A.F.S. Queiroz, C.S.A. Felix, D.L.F. da Silva, G.B. Dourado, and R.V. Oliveira, Microchem. J. 140, 176 (2018).10.1016/j.microc.2018.04.002 ↗
28. S. Qourzal, I. Bakas, N. Barka, A. Assabbane, and Y. Ait-Ichou, Can. Chem. Trans. 2, 1 (2014).
29. N.F.A. Neto, R.L.B. Cabral, A.A.G. Santiago, M.R.D. Bomio, F.V. Motta, and J.H.O. Nascimento, J. Electron. Mater. 49, 2118 (2020).10.1007/s11664-019-07904-1 ↗
30. N. F. Andrade Neto, P. M. Oliveira, C. A. Paskocimas, M. R. D. Bomio, and F. V. Motta, J. Electron. Mater. 48, 4840 (2019).10.1007/s11664-019-07267-7 ↗
31. F. G. Giesbrecht and M. L. Gumpertz, Planning, Construction, and Statistical Analysis of Comparative Experiments, 1st edn. (Wiley-Interscience, 2014).
32. M. Kermaniha, M. Kolahdouz, N. Manavizadeh, H. Aghababa, M. Elahi, M. Iraj, E. Asl-Soleimani, and H.H. Radamson, J. Mater. Sci. Mater. Electron. 27, 13086 (2016).10.1007/s10854-016-5452-y ↗
33. C.M. Ronconi, O.L. Alves, and R.E. Bruns, Thin Solid Films 517, 2886 (2009).10.1016/j.tsf.2008.10.121 ↗
34. D. C. Montgomery, Introdução Ao Controle Estatístico Da Qualidade, 7th edn. (LTC - Livros Técnicos e Científicos Editora Ltda., São Paulo, 2016).
35. C.L. Ücker, V. Goetzke, S.R. Almeida, E.C. Moreira, M.M. Ferrer, P.L.G. Jardim, M.L. Moreira, C.W. Raubach, and S. Cava, Ceram. Int. 47, 20570 (2021).10.1016/j.ceramint.2021.04.066 ↗
36. T. Lundstedt, E. Seifert, L. Abramo, B. Thelin, A. Nyström, J. Pettersen, and R. Bergman, Chemom. Intell. Lab. Syst. 42, 3 (1998).10.1016/S0169-7439(98)00065-3 ↗
37. G. Lozada, Controle Estatístico de Processos, 1st edn. (SER - SAGAH, Porto Alegre, 2017).
38. S. Kiran, and S.K.N. Kumar, Mater. Today Proc. 5, 10797 (2018).10.1016/j.matpr.2017.12.365 ↗
39. A. Viomar, G.A.R. Maia, F.R. Scremin, N.M. Khalil, M.T. Cunha, A.C. Antunes, and P.R.P. Rodrigues, Rev. Virtual Química 8, 889 (2016).
40. X. Mao, R. Zhou, S. Zhang, L. Ding, L. Wan, S. Qin, Z. Chen, J. Xu, and S. Miao, Sci. Rep. 6, 1 (2016).10.1038/s41598-016-0001-8 ↗
41. Musyaro’Ah, I. Huda, W. Indayani, B. Gunawan, G. Yudhoyono, and Endarko, in AIP Conference Proceedings (2017), p. 1788