journal article·2021-06

Effect of Al Doping and Cu Deficiency on the Microstructures and Thermoelectric Properties of BiCuSeO-Based Thermoelectric Materials

Fei Xu, Anmin Li, ZhuoFang Huang, Yu Rao, Bo Lu, Yu Wu

Journal of Electronic Materials· Volume 50· Issue 6
Publisher page

Abstract

The effects of low-price element Al doping and Cu deficiency on the thermoelectric performance of Bacchus are studied in the paper. Bi1−xAlxCu1−xSeO (x = 0, 0.025, 0.05, 0.075, 0.1, 0.125) were prepared by high-energy ball-milling, high-temperature solid-state reaction and hot-press sintering. Due to the massive substitutions of Bi3+ with Al2+, the Al in Bacchus exceeds the solution limit and the thermal conductivity decreases significantly. The structure of the thermoelectric materials is lamellar and tetragonal, and Al doping and Cu deficiency can refine the grains. The deficiency of Cu can reduce the generation of Al4Cu9, which guarantees the stability of the sample at high temperature and leads to the formation of a large number of holes. Moreover, the hole carrier again becomes the main carrier of the sample. Therefore, all the samples belong to p-type semiconductors at room temperature. In the results, the combination of optimized conductivity and thermal conductivity is helpful to improve the ZT value; the maximum the ZT value is 0.90 of Bi0.875Al0.125Cu0.875SeO at 873 K, which is 2.46 times higher than that of Bacchus.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal Radiation and Cooling Technologies · Advanced Thermodynamics and Statistical Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. F. Li, J. Li, L. Zhao, K. Xiang, Y. Liu, B. Zhang, Y. Lin, C. Nan, and H. Zhu, Energy Environ. Sci. 5, 7188 (2012).10.1039/c2ee21274a ↗
2. L. Zhao, J. He, D. Berardan, Y. Lin, J. Li, C. Nan, and N. Dragoe, Energy Environ. Sci. 7, 2900 (2014).10.1039/C4EE00997E ↗
3. M. Farooq, S. Butt, K. Gao, Y. Zhu, X. Sun, X. Pang, S.U. Khan, F. Mohmed, A. Mahmood, and N. Mahmood, RSC Adv. 6, 33789 (2016).10.1039/C6RA01686C ↗
4. J. Li, J. Sui, Y. Pei, X. Meng, D. Berardan, N. Dragoe, W. Cai, and L. Zhao, J. Mater. Chem. A 2, 4903 (2014).10.1039/c3ta14532h ↗
5. S. Tan, H. Lei, D. Shao, H. Lv, W. Lu, Y. Huang, Y. Liu, B. Yuan, L. Zu, and X. Kan, Appl. Phys. Lett. 105, 82109 (2014).10.1063/1.4894258 ↗
6. J. Li, J. Sui, C. Barreteau, D. Berardan, N. Dragoe, W. Cai, Y. Pei, and L. Zhao, J. Alloys Compd. 551, 649 (2013).10.1016/j.jallcom.2012.10.160 ↗
7. J. Li, J. Sui, Y. Pei, C. Barreteau, D. Berardan, N. Dragoe, W. Cai, J. He, and L. Zhao, Energy Environ. Sci. 5, 8543 (2012).10.1039/c2ee22622g ↗
8. G. Ren, S. Butt, C. Zeng, Y. Liu, B. Zhan, J. Lan, Y. Lin, and C. Nan, J. Electron. Mater. 44, 1627 (2015).10.1007/s11664-014-3495-5 ↗
9. S.D. Luu, and P. Vaqueiro, Semicond. Sci. Technol. 29, 64002 (2014).10.1088/0268-1242/29/6/064002 ↗
10. C. Hsiao, and X. Qi, Acta Mater. 102, 88 (2016).10.1016/j.actamat.2015.08.079 ↗
11. A. Achour, K. Chen, M.J. Reece, and Z. Huang, J. Alloys Compd. 735, 861 (2018).10.1016/j.jallcom.2017.11.104 ↗
12. C. Barreteau, D. Bérardan, E. Amzallag, L. Zhao, and N. Dragoe, Chem. Mater. 24, 3168 (2012).10.1021/cm301492z ↗
13. M. Zhang, J. Yang, Q. Jiang, L. Fu, Y. Xiao, Y. Luo, D. Zhang, Y. Cheng, and Z. Zhou, J. Electron. Mater. 44, 2849 (2015).10.1007/s11664-015-3700-1 ↗
14. J. Tang, R. Xu, J. Zhang, D. Li, W. Zhou, X. Li, Z. Wang, F. Xu, G. Tang, and G. Chen, ACS Appl. Mater. Interfaces 11, 15543 (2019).10.1021/acsami.9b00958 ↗
15. Y. Liu, L.D. Zhao, Y. Zhu, Y. Liu, F. Li, M. Yu, D.B. Liu, W. Xu, Y.H. Lin, and C.W. Nan, Adv. Energy Mater. 6, 1502423 (2016).10.1002/aenm.201502423 ↗
16. C. Li, D. Guo, K. Li, B. Shao, D. Chen, Y. Ma, and J. Sun, Physica E 97, 392 (2018).10.1016/j.physe.2017.12.017 ↗