Spark Plasma Sintering Temperature Effect on Structural, Dielectric and Ferroelectric Properties of Ba0.9Sr0.1TiO3 Nanocrystalline Ceramics
Source abstract
Abstract
A combination of mechanical alloying and spark plasma sintering (SPS) was used to process Ba0.9Sr0.1TiO3 (abbreviated as BST) with a high-density and homogeneous microstructure, at a temperature 300°C to 400°C lower than that used in conventional sintering. The SPS technique was employed to prepare dense Ba0.9Sr0.1TiO3 nano-ceramics at different temperatures ranging from 800°C to 1000°C within a very short time. The SPS samples were characterized by x-ray diffraction, scanning electron microscopy, transmission electron microscopy, electrical, ferroelectric and piezoelectric property measurements. The dielectric constant both at room temperature and Curie temperature increased with increasing SPS temperature. The coercive field increased continuously with rising SPS temperature, but the spontaneous polarization increased gradually up to 900°C and then decreased considerably with further increases in SPS temperature. In addition, the prepared nano-ceramic exhibited excellent piezoelectric properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Multiferroics and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. B. Su and W.T. Button, J. Appl. Phys. 95, 1382 (2004).10.1063/1.1636263 ↗
2. V.V. Lemanov, E.P. Smirnova, P.P. Syrnikov, and E.A. Tarakanov, Phys. Rev. B 54, 3151 (1996).10.1103/PhysRevB.54.3151 ↗
3. G.W. Dietz, M. Schumacher, R. Waser, S.K. Streiffer, C. Basceri, and A.J. Kingon, J. Appl. Phys. 82, 2359 (1997).10.1063/1.366045 ↗
4. J.G. Cheng, J. Tang, J.H. Chu, and A.J. Zhang, Appl. Phys. Lett. 77, 1035 (2000).10.1063/1.1289038 ↗
5. T.S. Kim, C.H. Kim, and M.H. Oh, J. Appl. Phys. 76, 4316 (1994).10.1063/1.357317 ↗
6. M. VenkataRamana, N.R. Reddy, K.V. Siva Kumar, and B.S. Murty, J. Nanometer. (2010). doi: 10.1155/2010/783043 .
7. A. Moure, A. Castro, and L. Pardo, Acta Mater. 52, 945 (2004).10.1016/j.actamat.2003.10.029 ↗
8. G. Arlt, D. Hennings, and G. DeWith, J. Appl. Phys. 58, 1619 (1985).10.1063/1.336051 ↗
9. M.H. Frey and D.A. Payne, Phys. Rev. B 54, 3158 (1996).10.1103/PhysRevB.54.3158 ↗
10. Z. Shen, Z. Shao, H. Peng, and M. Nygren, Nature 417, 266 (2002).10.1038/417266a ↗
11. Z. Zhao, V. Buscaglia, M. Viviani, M.T. Buscaglia, L. Mitoseriu, A. Testino, M. Nygren, M. Jonson, and P. Nanni, Phys. Rev. B 70, 024107 (2004).10.1103/PhysRevB.70.024107 ↗
12. V.R. Mudinepalli, S.-H. Song, J. Li, and B.S. Murty, Mater. Chem. Phys. 142, 686 (2013).10.1016/j.matchemphys.2013.08.023 ↗
13. V.R. Mudinepalli, S.-H. Song, J. Li, and B.S. Murty, Ceram. Int. 40, 1781 (2014).10.1016/j.ceramint.2013.07.078 ↗
14. S.-H. Song, Q.-S. Zhu, L.-Q. Weng, and V.R. Mudinepalli, J. Eur. Ceram. Soc. 35, 131 (2015).10.1016/j.jeurceramsoc.2014.08.016 ↗
15. S.-H. Song, Q. Song, J. Li, and V.R. Mudinepalli, Ceram. Int. 40, 6373 (2014).10.1016/j.ceramint.2013.11.031 ↗
16. V.R. Mudinepalli, S.-H. Song, J. Li, and B.S. Murty, Scr. Mater. 82, 9 (2014).10.1016/j.scriptamat.2014.03.004 ↗
17. V.R. Mudinepalli, S.-H. Song, M. Ravi, J. Li, and B.S. Murty, Ceram. Int. 41, 6882 (2015).10.1016/j.ceramint.2015.01.140 ↗
18. V.R. Mudinepalli, S.-H. Song, J. Li, and B.S. Murty, J. Magn. Magn. Mater. 385, 44 (2015).10.1016/j.jmmm.2015.03.059 ↗
19. C. Shen, Q.-F. Liu, and Q. Liu, Mater. Lett. 58, 2302 (2004).10.1016/j.matlet.2004.02.009 ↗
20. H. Xue, Z. Xiang, and H. Zhou, J. Am. Ceram. Soc. 90, 2653 (2007).10.1111/j.1551-2916.2007.01793.x ↗
21. X. Wang, R. Huang, Y. Zhao, Y. Zhao, H. Zhou, and Z. Jia, J. Alloy. Compd. 533, 25 (2012).10.1016/j.jallcom.2012.04.010 ↗
22. J. Liu, Z. Shen, M. Nyygren, B. Su, and T.W. Button, J. Am. Cer. Soc 89, 2689 (2006).10.1111/j.1551-2916.2006.01122.x ↗
23. Y.J. Wu, N. Wang, S.Y. Wu, and X.M. Chen, J. Am. Ceram. Soc. 94, 1343 (2011).10.1111/j.1551-2916.2011.04507.x ↗
24. Y.J. Wu, S.H. Su, S.Y. Wu, and X.M. Chen, Ceram. Int. 37, 1979 (2011).10.1016/j.ceramint.2011.02.006 ↗
25. D. Hennings, Int. J. High Technol. Ceram. 3, 91 (1987).10.1016/0267-3762(87)90031-2 ↗
26. V.R. Mudinepalli, S.-H. Song, and B.S. Murty, J. Mater. Sci: Mater. Electron. 24, 2141 (2013).
27. R.M. Mahani, I.K. Battisha, M.A. Salem, and A.B. Abou Hamad, J. Alloys Compd. 508, 354 (2010).10.1016/j.jallcom.2010.05.060 ↗
28. C.C. Leu, C.Y. Chen, and C.H. Chien, Appl. Phys. Lett. 82, 3493 (2003).10.1063/1.1576308 ↗
29. V. Buscaglia, M.T. Buscaglia, M.M. Viviani, L. Mitoseriu, P. Nanni, and V. Trefilettii, J. Eur. Ceram. Soc. 26, 2889 (2006).10.1016/j.jeurceramsoc.2006.02.005 ↗
30. K. Okazaki and K. Nagata, J. Am. Ceram. Soc. 56, 82 (1973).10.1111/j.1151-2916.1973.tb12363.x ↗
31. C.A. Randall, N. Kim, J.P. Kucera, W. Cao, and T.R. Shrout, J. Am. Ceram. Soc. 81, 677 (1998).10.1111/j.1151-2916.1998.tb02389.x ↗
32. N. Ma, B.-P. Zhang, W.-G. Yang, and D. Gua, J. Eur. Ceram. Soc. 32, 1059 (2012).10.1016/j.jeurceramsoc.2011.11.014 ↗
33. S. Tsunekawa, S. Ito, T. Mori, K. Ishikawa, Z.-Q. Li, and Y. Kawazoe, Phys. Rev. B 62, 3065 (2000).10.1103/PhysRevB.62.3065 ↗
34. F.A. Kroger and H.J. Wink, Solid State Physics, ed. F. Seitz and D. Turnbull (New York: Academic Press, 1956),
35. T.M. Shaw, S. Mckinstry, and P.C. Mcintry, Ann. Rev. Mater. Sci. 30, 263 (2000).10.1146/annurev.matsci.30.1.263 ↗
36. N. Lie, M.K. Zhu, P. Yang, L.L. Wang, L.F. Wang, Y.D. Hou, and H. Yan, J. Appl. Phys. 109, 054102 (2001).
37. M. Zheng, Y. Hou, H. Ge, M. Zhu, and H. Yan, Phys. Status Solidi A 210, 261 (2013).10.1002/pssa.201228657 ↗
38. T.M. Kamel and G. de With, J. Euro. Ceram. Soc. 28, 851 (2008).10.1016/j.jeurceramsoc.2007.08.010 ↗
39. Z.Y. Shen and J.F. Li, J. Ceram. Soc. Jpn. 118, 940 (2010).10.2109/jcersj2.118.940 ↗
40. S.F. Shao, J.L. Zhang, Z. Zhang, P. Zheng, M.L. Zhao, J. Li, and C. Wang, J. Phys. D Appl. Phys. 41, 125408 (2008).10.1088/0022-3727/41/12/125408 ↗
41. K. Okazaki and K. Nagata, J. Am. Ceram. Soc. 56, 82 (1973).10.1111/j.1151-2916.1973.tb12363.x ↗
42. S. Wada, S. Kondo, C. Moriyoshi, and Y. Kuroiwa, Jpn. J. Appl. Phys. 47, 7612 (2008).10.1143/JJAP.47.7612 ↗
43. S. Wada, H. Yasuno, T. Hoshina, S.M. Nam, H. Kakemoto, and T. Tsurumi, Jpn. J. Appl. Phys. Part 1 42, 6188 (2003).10.1143/JJAP.42.6188 ↗
44. S. Wada, M. Narahara, T. Hoshina, H. Kakemoto, and T. Tsurumi, J. Mater. Sci. 38, 2655 (2003).10.1023/A:1024438703449 ↗
45. S. Wada, T. Hoshina, H. Yasuno, S.M. Nam, H. Kakemoto, and T. Tsurumi, J. Korean Phys. Soc. 46, 303 (2005).
46. Z.V. Nava, S.G. Fritsch, C. Tenailleau, T. Lebey, B. Durand, and J.Y.C. Ching, J. Electroceram. 22, 238 (2009).10.1007/s10832-007-9396-8 ↗