journal article·2022-02

Effect of Hydrothermal Synthesis Temperature on the Microstructural and Thermoelectric Characteristics of Thermally Deposited Bi0.5Sb1.5Te3 Thin Films

Hamta Mansouri, Yasaman Saberi, Seyed Abdolkarim Sajjadi

Journal of Electronic Materials· Volume 51· Issue 2
Publisher page

Abstract

Bismuth antimony telluride (Bi0.5Sb1.5Te3) is a ternary compound with good thermoelectric properties at near room temperature. In this research, Bi0.5Sb1.5Te3 powders were hydrothermally synthesized at different temperatures (100, 150, 190, and 230°C) for 24 h. The deposition procedure of Bi0.5Sb1.5Te3 thin films was done by using thermal evaporation. The phases and microstructures of powders and thin films were investigated by x-ray diffraction and field emission scanning electron microscopy. Moreover, the size distribution of powders was investigated using a particle size analyzer. The phase and microstructural results of the different synthesized powders confirmed that the Bi0.5Sb1.5Te3 thin film prepared by powder synthesis at 150°C for 24 h is the best choice for manufacturing with good thermoelectric properties because of its nano-sized grains and high purity. The results showed that the Bi0.5Sb1.5Te3 thin film fabricated by powders synthesized at 150°C has a single rhombohedral phase with a good semiconductor performance. The results of thermoelectric tests confirmed that the Bi0.5Sb1.5Te3 thin film fabricated using a hydrothermal method and thermal evaporation deposition approach shows a high Seebeck coefficient (183.5 μV/K) and low electronic thermal conductivity (1.32 × 10−4 W/m k−1) at 298 K. Besides, the power factor values of 0.7, 2.59 and 2.9 μW/cm K−2 were obtained at 298, 373 K and 473 K, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Chalcogenide Semiconductor Thin Films · Thermal properties of materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. L.X. Liang, Y. Deng, Y. Wang, H.L. Gao, and J. Cui, J. Nanopart. Res. (2014). https://doi.org/10.1007/s11051-014-2575-z.10.1007/s11051-014-2575-z ↗
2. L. Cao, Y. Wang, Y. Deng, H. Gao, B. Luo, and W. Zhu, J. Nanopart. Res. (2013). https://doi.org/10.1007/s11051-013-2088-1.10.1007/s11051-013-2088-1 ↗
3. N. Bolghanabadi, S.A. Sajjadi, A. Babakhani, and Y. Saberi, J. Electron. Mater. (2021). https://doi.org/10.1007/s11664-020-08656-z.10.1007/s11664-020-08656-z ↗
4. W.J. Jung, and I.H. Kim, J. Met. Mater. Int. (2018). https://doi.org/10.1007/s12540-018-0029-3.10.1007/s12540-018-0029-3 ↗
5. E. Symeou, C. Nicolaou, T. Kyratsi, and J. Giapintzakis, J. Appl. Phys. (2019). https://doi.org/10.1063/1.5082995.10.1063/1.5082995 ↗
6. G.S. Hegde, A.N. Prabhu, R.Y. Huang, and Y.K. Kuo, J. Mater. Sci. Mater. Electron. (2020). https://doi.org/10.1007/s10854-020-04383-7.10.1007/s10854-020-04383-7 ↗
7. P. Dharmaiah, and S.J. Hong, Int. J. Appl. Ceram. Technol. (2018). https://doi.org/10.1111/ijac.12762.10.1111/ijac.12762 ↗
8. D. Bourgault, B. Schaechner, C. Giroud Garampon, T. Crozes, N. Caillault, and J. Carbone, Alloys Compd. (2014). https://doi.org/10.1016/j.jallcom.2014.01.172.10.1016/j.jallcom.2014.01.172 ↗
9. X. Ji, B. Zhang, T.M. Tritt, J.W. Kolis, and A. Kumbhar, J. Electron. Mater. (2007). https://doi.org/10.1007/s11664-007-0156-y.10.1007/s11664-007-0156-y ↗
10. B. Hamawandi, S. Ballikaya, H. Batili, V. Roosmark, M. Orlovská, A. Yusuf, M. Johnsson, R. Szukiewicz, M. Kuchowicz, and M.S. Toprak, J. Appl. Sci. (2020). https://doi.org/10.3390/app10031178.10.3390/app10031178 ↗
11. X. Yan, W. Zheng, F. Liu, S. Yang, and Z. Wang, J. Sci. Rep. (2016). https://doi.org/10.1038/srep37722.10.1038/srep37722 ↗
12. G.H. Dong, Y.J. Zhu, G.F. Cheng, and Y.J. Ruan, J. Alloys Compd. (2013). https://doi.org/10.1016/j.jallcom.2012.09.061.10.1016/j.jallcom.2012.09.061 ↗
13. Z. Chen, M.Y. Lin, G.D. Xu, S. Chen, J.H. Zhang, and M.M. Wang, J. Alloys Compd. (2014). https://doi.org/10.1016/j.jallcom.2013.11.065.10.1016/j.jallcom.2013.11.065 ↗
14. V.T. Bublik, D.I. Bogomolov, Z.M. Dashevskii, I.A. Drabkin, V.V. Karataev, M.G. LavrentEv, G.I. Pivovarov, V.B. Osvenskii, A.I. Sorokin, and N.Y. Tabachkova, J. Russ. Microelectron. (2012). https://doi.org/10.1134/S1063739712080057.10.1134/S1063739712080057 ↗
15. B. Hamawandi, H. Mansouri, S. Ballikaya, Y. Demirci, M. Orlovská, N. Bolghanabadi, S.A. Sajjadi, and M.S. Toprak, J. Front. Mater. (2020). https://doi.org/10.3389/fmats.2020.569723.10.3389/fmats.2020.569723 ↗
16. P. Dharmaiah, C.H. Lee, B. Madavali, and S.J. Hong, J. Arch. Metall. Mater. (2017). https://doi.org/10.1515/amm-2017-0142.10.1515/amm-2017-0142 ↗
17. J.H. Adair, and E. Suvaci, J. Mater. Sci. Technol. (2001). https://doi.org/10.1016/b0-08-043152-6/01607-7.10.1016/b0-08-043152-6/01607-7 ↗
18. E.B. Kim, P. Dharmaiah, K.H. Lee, C.H. Lee, J.H. Lee, J.K. Yang, D.H. Jang, D.S. Kim, and S.J. Hong, J. Alloys Compd. (2019). https://doi.org/10.1016/j.jallcom.2018.10.408.10.1016/j.jallcom.2018.10.408 ↗
19. K.A. Morgan, T. Tang, I. Zeimpekis, A. Ravagli, C. Craig, J. Yao, Z. Feng, D. Yarmolich, C. Barker, H. Assender, and D.W. Hewak, J. Sci. Rep. (2019). https://doi.org/10.1038/s41598-019-41000-y.10.1038/s41598-019-41000-y ↗
20. D. Bourgault, C.G. Garampon, N. Caillault, L. Carbone, and J.A. Aymami, J. Thin Solid Films. (2008). https://doi.org/10.1016/j.tsf.2008.06.001.10.1016/j.tsf.2008.06.001 ↗
21. K. Kusagaya, and M. Takashiri, J. Alloys Compd. (2015). https://doi.org/10.1016/j.jallcom.2015.09.039.10.1016/j.jallcom.2015.09.039 ↗
22. B. Sb, and I. Kim, J. Mater. Lett. (2000). https://doi.org/10.1016/S0167-577X(00)00005-7.10.1016/S0167-577X(00)00005-7 ↗
23. L.M. Goncalves, P. Alpuim, A.G. Rolo, and J.H. Correia, J. Thin Solid Films (2011). https://doi.org/10.1016/j.tsf.2011.01.395.10.1016/j.tsf.2011.01.395 ↗
24. J.M. Lin, Y.C. Chen, and W. Chen, J. Nanomater. (2015). https://doi.org/10.1155/2015/564954.10.1155/2015/564954 ↗
25. J.M. Lin, Y.C. Chen, C.F. Yang, and W. Chen, J. Nanomater. (2015). https://doi.org/10.1155/2015/135130.10.1155/2015/135130 ↗
26. W. Wang, B. Poudel, J. Yang, D.Z. Wang, and Z.F. Ren, J. Am. Chem. Soc. (2005). https://doi.org/10.1021/ja054861p.10.1021/ja054861p ↗
27. X. Mu, H. Zhou, D. He, W. Zhao, P. Wei, W. Zhu, X. Nie, H. Liu, and Q. Zhang, Nano Energy (2017). https://doi.org/10.1016/j.nanoen.2017.01.013.10.1016/j.nanoen.2017.01.013 ↗
28. L. Han, S.H. Spangsdorf, N.V. Nong, L.T. Hung, Y.B. Zhang, H.N. Pham, Y.Z. Chen, A. Roch, L. Stepien, and N. Pryds, J. RSC Adv. (2016). https://doi.org/10.1039/c6ra06688g.10.1039/c6ra06688g ↗
29. H. Li, H. Jing, Y. Han, G.Q. Lu, and L. Xu, J. Intermet. (2013). https://doi.org/10.1016/j.intermet.2013.07.007.10.1016/j.intermet.2013.07.007 ↗
30. B. Madavali, and S. Hong, J. Electron. Mater. (2016). https://doi.org/10.1007/s11664-016-5011-6.10.1007/s11664-016-5011-6 ↗
31. A. Janotti, and C.G. Van De Walle, J. Rep. Prog. Phys. 1, 21 (2009). https://doi.org/10.1088/0034-4885/72/12/126501.10.1088/0034-4885/72/12/126501 ↗
32. H. Ni, X. Zhao, T. Zhu, X. Ji, and J. Tu, J. Alloys Compd. (2005). https://doi.org/10.1016/j.jallcom.2005.01.046.10.1016/j.jallcom.2005.01.046 ↗
33. H. Mansouri, S.A. Sajjadi, A. Babakhani, and Y. Saberi, J. Mater. Sci. Mater. Electron. (2021). https://doi.org/10.1007/s10854-021-05645-8.10.1007/s10854-021-05645-8 ↗
34. L. Xue, W. Shen, Z. Zhang, C. Fang, Y. Zhang, and X. Jia, J. Appl. Phys. A. (2021). https://doi.org/10.1007/s00339-020-04236-4.10.1007/s00339-020-04236-4 ↗
35. Y. Zhang, G. Xu, J. Mi, F. Han, Z. Wang, and C. Ge, Mater. Res. Bull. (2011). https://doi.org/10.1016/j.materresbull.2010.11.024.10.1016/j.materresbull.2010.11.024 ↗
36. H.J. Goldsmid, J. Mater. (Basel) (2014). https://doi.org/10.3390/ma7042577.10.3390/ma7042577 ↗
37. X. Mu, H. Zhou, D. He, W. Zhao, P. Wei, W. Zhu, X. Nie, and H. Liu, Nano Energy (2017). https://doi.org/10.1016/j.nanoen.2017.01.013.10.1016/j.nanoen.2017.01.013 ↗
38. Y. Saberi, S.A. Sajjadi, and H. Mansouri, J. Ceram. Int. (2021). https://doi.org/10.1016/j.ceramint.2020.12.285.10.1016/j.ceramint.2020.12.285 ↗
39. I.J. Yoo, Y. Song, D. Chan Lim, N.V. Myung, K.H. Lee, M. Oh, D. Lee, Y. Do Kim, S. Kim, Y.H. Choa, J.Y. Lee, K.H. Lee, and J.H. Lim, J. Mater. Chem. A 1, 21 (2013). https://doi.org/10.1039/c3ta01631e.10.1039/c3ta01631e ↗
40. P. Fan, Z.H. Zheng, G.X. Liang, D.P. Zhang, and X.M. Cai, J. Alloys Compd. (2010). https://doi.org/10.1016/j.jallcom.2010.06.046.10.1016/j.jallcom.2010.06.046 ↗
41. Z.H. Zheng, P. Fan, J.T. Luo, X.M. Cai, G.X. Liang, D.P. Zhang, and F. Ye, Thin Solid Films (2014). https://doi.org/10.1016/j.tsf.2014.04.043.10.1016/j.tsf.2014.04.043 ↗
42. Y. Saberi, S.A. Sajjadi, and H. Mansouri, J. Mater. Sci. Mater. Electron. (2020). https://doi.org/10.1007/s10854-020-04435-y.10.1007/s10854-020-04435-y ↗
43. G. Shanmugam, and S. Brahadeeswaran, Spectrochim Acta Part A Mol. Biomol. Spectrosc. (2012). https://doi.org/10.1016/j.saa.2012.04.100.10.1016/j.saa.2012.04.100 ↗
44. J. Dheepa, R. Sathyamoorthy, and S. Velumani, J. Mater. Charact. (2007). https://doi.org/10.1016/j.matchar.2006.11.027.10.1016/j.matchar.2006.11.027 ↗
45. V.D. Das, and N. Soundararajan, J. Appl. Phys. (1989). https://doi.org/10.1063/1.342823.10.1063/1.342823 ↗
46. B. Madavali, H.S. Kim, K.H. Lee, Y. Isoda, F. Gascoin, and S.J. Hong, J. Mater. Des. (2016). https://doi.org/10.1016/j.matdes.2016.09.089.10.1016/j.matdes.2016.09.089 ↗
47. I. Kim, J. Mater. Lett. (2000). https://doi.org/10.1016/S0167-577X(00)00005-7.10.1016/S0167-577X(00)00005-7 ↗
48. J. Horak, Z. Stary, P. Lošťák, and J. Pancíř, J. Phys. Chem. Solids 1, 21 (1990). https://doi.org/10.1016/0022-3697(90)90017-A.10.1016/0022-3697(90)90017-A ↗
49. S.J. Hong, K.S. Hwang, J.W. Byeon, M.K. Lee, C.K. Rhee, and B.S. Chun, J. Solid State Phenom. (2007). https://doi.org/10.4028/www.scientific.net/SSP.119.271.10.4028/www.scientific.net/SSP.119.271 ↗
50. X. Liu, W. Yu Zhao, H. Yu Zhou, X. Mu, D. Qi He, W. Ting Zhu, P. Wei, H. Wu, and Q. Jie Zhang, J. Electron. Mater. 1, 21 (2016). https://doi.org/10.1007/s11664-015-4027-7.10.1007/s11664-015-4027-7 ↗
51. K. Hasezaki, T. Hamachiyo, M. Ashida, T. Ueda, and Y. Noda, J. Mater. Trans. (2010). https://doi.org/10.2320/matertrans.MH200901.10.2320/matertrans.MH200901 ↗
52. B. Huang, C. Lawrence, A. Gross, G.S. Hwang, N. Ghafouri, S.W. Lee, H. Kim, C.P. Li, C. Uher, K. Najafi, and M. Kaviany, J. Appl. Phys. (2008). https://doi.org/10.1063/1.3033381.10.1063/1.3033381 ↗
53. Y. Mishima, Y. Kimura, S.W. Kim, and J. Nanomaterials, From Res. Appl. (2006). https://doi.org/10.1016/B978-0-08-044964-7.50013-3.10.1016/B978-0-08-044964-7.50013-3 ↗
54. S.S. Lin, and C.N. Liao, J. Appl. Phys. (2011). https://doi.org/10.1063/1.3658256.10.1063/1.3658256 ↗
55. Y.S. Wudil, M.A. Gondal, S.G. Rao, S. Kunwar, and A.Q. Alsayoud, J. Ceram. Int. (2020). https://doi.org/10.1016/j.ceramint.2020.06.196.10.1016/j.ceramint.2020.06.196 ↗
56. K.H. Lee, W.H. Shin, H.S. Kim, K. Lee, J.W. Roh, J. Yoo, J. Il Kim, S.W. Kim, and S. Il Kim, J. Scr. Mater. (2019). https://doi.org/10.1016/j.scriptamat.2018.09.038.10.1016/j.scriptamat.2018.09.038 ↗
57. K. Singkaselit, A. Sakulkalavek, and R. Sakdanuphab, J. Adv. Nat. Sci. Nanosci. Nanotechnol. (2017). https://doi.org/10.1088/2043-6254/aa7222.10.1088/2043-6254/aa7222 ↗
58. A.M. Adam, E. Lilov, and P. Petkov, J. Superlattices Microstruct. (2017). https://doi.org/10.1016/j.spmi.2016.09.034.10.1016/j.spmi.2016.09.034 ↗
59. H.S. Kim, Z.M. Gibbs, Y. Tang, H. Wang, and G.J. Snyder, J. APL Mater. (2015). https://doi.org/10.1063/1.4908244.10.1063/1.4908244 ↗
60. P. Dharmaiah, H.S. Kim, C.H. Lee, and S.J. Hong, J. Alloys Compd. (2016). https://doi.org/10.1016/j.jallcom.2016.05.340.10.1016/j.jallcom.2016.05.340 ↗
61. M.L. Lwin, P. Dharmaiah, B. Madavali, C.H. Lee, D. Won Shin, G. Song, K.H. Lee, and S.J. Hong, J. Intermet. 1, 21 (2018). https://doi.org/10.1016/j.intermet.2018.09.015.10.1016/j.intermet.2018.09.015 ↗