Calcium Bismuth Titanate with High Curie Temperature (Tc) for High-Temperature Sensor Applications
Source abstract
Abstract
Bismuth layer-structured ferroelectric (BLSF) ceramics exhibit linearity in resistivity with respect to temperature changes, and therefore find application as high-temperature sensor materials. In this study, calcium bismuth titanate (CBT), a BLSF material, was synthesized by calcining combined oxide precursors at 850°C for 2 h, and its particle size distribution, phase analysis, grain size distribution and morphology were characterized. Circular discs were prepared by sintering in the temperature range of 1000 to 1200°C. The sintered discs were characterized for dielectric constant (K), P-E hysteresis loop and DC electrical resistivity (ρ) from 100 to 900°C. The highest density (> 95% Th.) was obtained for samples sintered at 1175°C. DC resistivity decreased linearly from 1014 to 105 Ω cm with the rise in temperature from 100 to 900°C, therefore confirming CBT as a prospective high-temperature sensor material.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Acoustic Wave Resonator Technologies · Multiferroics and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. S. Zhang, and F. Yu, J. Am. Ceram. Soc. 94, 3153 (2011).10.1111/j.1551-2916.2011.04792.x ↗
2. D. Damjanovic, Curr. Opin. Solid State Mater. Sci. 3, 469 (1998).10.1016/S1359-0286(98)80009-0 ↗
3. H. Weng, F.L. Duan, Z. Ji, X. Chen, Z. Yang, Y. Zhang, and B. Zou, Ceram. Int. 46, 3600 (2020).10.1016/j.ceramint.2019.10.078 ↗
4. X. Gong, L. An, and C. Xu, In: IEEE International Workshop on Antenna Technology 140, (2012)
5. I. Stanimirović and Z. Stanimirović, Temperature Sensing, (InTech, 2018).
6. R. Lakes, Composites and Metamaterials (New Jersey: World Scientific, 2020).10.1142/11715 ↗
7. T. Takeuchi, T. Tani, and Y. Saito, Jpn. J. Appl. Phys. 39, 5577 (2000).10.1143/JJAP.39.5577 ↗
8. J.P. Mercurio, A. Souirti, and M. Manier, Mater. Res. Bull. 27, 123 (1992).10.1016/0025-5408(92)90050-A ↗
9. P. Fang, H. Fan, Z. Xi, W. Chen, S. Chen, and X. Li, J. Alloys Compd. 550, 335 (2013).10.1016/j.jallcom.2012.10.147 ↗
10. B. Frit, and J.P. Mercurio, J. Alloys Compd. 188, 27 (1992).10.1016/0925-8388(92)90639-Q ↗
11. T. Takeuchi, T. Tani, and Y. Saito, Jpn. J. Appl. Phys. 38, 5553 (1999).10.1143/JJAP.38.5553 ↗
12. Z. Zhou, Y. Li, L. Yang, X. Dong, and H. Yan, Appl. Phys. Lett. 90, 212908 (2007).10.1063/1.2740189 ↗
13. L.V. Korzunova, J. Ferroelectr. 134, 175 (1992).10.1080/00150199208015584 ↗
14. J. Rödel, K.G. Webber, R. Dittmer, W. Jo, M. Kimura, and D. Damjanovic, J. Eur. Ceram. Soc. 35, 1659 (2015).10.1016/j.jeurceramsoc.2014.12.013 ↗
15. H.X. Yan, H.T. Zhang, R. Ubic, M.J. Reece, J. Liu, Z.J. Shen, and Z. Zhang, Adv. Mater. 17, 1261 (2005).10.1002/adma.200401860 ↗
16. M. Villegas, T. Jardiel, and G. Farias, J. Eur. Ceram. Soc. 24, 1025 (2004).10.1016/S0955-2219(03)00426-6 ↗
17. L. Zhang, R. Chu, S. Zhao, G. Li, and Q. Yin, Mater. Sci. Eng. B 116, 99 (2005).10.1016/j.mseb.2004.09.007 ↗
18. S. Hong, J. Horn, S. Trolier-McKinstry, and G.L. Messing, J. Mater. Sci. Lett. 19, 1661 (2000).10.1023/A:1006722312423 ↗
19. J.T. Zeng, Y.X. Li, D. Wang, and Q.R. Yin, Solid State Commun. 133, 553 (2005).10.1016/j.ssc.2004.12.043 ↗
20. A. Moure, C. Alemany, and L. Pardo, IEEE Trans. Ultrasonund Ferroelectr. Freq. Control 52, 570 (2005).10.1109/TUFFC.2005.1428038 ↗
21. M. Kimura, T. Sawada, A. Ando, and Y. Sakabe, Jpn. J. Appl. Phys. 38, 5557 (1999).10.1143/JJAP.38.5557 ↗
22. H. Ogawa, M. Kimura, A. Ando, and Y. Sakabe, Jpn. J. Appl. Phys. 40, 5715 (2001).10.1143/JJAP.40.5715 ↗
23. P. Qi, S.J. Zhang, and T.R. Shrout, Appl. Phys. Lett. 89, 012907 (2006).10.1063/1.2216355 ↗
24. Y. Noguchi, and M. Miyayama, J. Appl. Phys. 95, 4261 (2004).10.1063/1.1667600 ↗
25. R. Aoyagi, H. Takeda, S. Okamura, and T. Shiosaki, Mater. Res. Bull. 38, 25 (2003).10.1016/S0025-5408(02)01001-2 ↗
26. T. Takenaka, and K. Sakata, Jpn. J. Appl. Phys. 24, 730 (1985).10.7567/JJAPS.24S2.730 ↗
27. Z. Zhang, H. Yan, X. Dong, and Y. Wang, Mater. Res. Bull. 38, 241 (2003).10.1016/S0025-5408(02)01032-2 ↗
28. M. Yokosuka, Jpn. J. Appl. Phys. 41, 7123 (2002).10.1143/JJAP.41.7123 ↗
29. L. Zheng, G. Li, W. Zhang, and Q. Yin, Jpn. J. Appl. Phys. 41, L1471 (2002).10.1143/JJAP.41.L1471 ↗
30. M. Rahim, N. Abu, and M.R.H. Mas Haris, Cogent Chem. 2, 1234345 (2016).10.1080/23312009.2016.1234345 ↗
31. M. Hamadanian, A. Reisi-Vanani, and A. Majedi, Mater. Chem. Phys. 116, 376 (2009).10.1016/j.matchemphys.2009.03.039 ↗
32. J. Choi, H. Park, and M.R. Hoffmann, J. Phys. Chem. C 114, 783 (2010).10.1021/jp908088x ↗
33. P. Sivagnanapalani, B. Sahoo, and P.K. Panda, Ceram. Int. 44, 20348 (2018).10.1016/j.ceramint.2018.08.023 ↗
34. R.L. Withers, J.G. Thompson, and A.D. Rae, J. Solid State Chem. 94, 404 (1991).10.1016/0022-4596(91)90207-X ↗
35. P. Sivagnanapalani, B. Sahoo, and P.K. Panda, ISSS J. Micro Smart Syst. 8, 25 (2019).10.1007/s41683-019-00036-y ↗
36. P. Sivagnanapalani, N.I. Ansari, and P.K. Panda, Sensor Int. 2, 100093 (2021).10.1016/j.sintl.2021.100093 ↗
37. H.X. Yan, C. Li, J.G. Zhou, W.M. Zhu, L.X. He, Y.X. Song, and Y.H. Yu, Jpn. J. Appl. Phys. 40, 6501 (2001).10.1143/JJAP.40.6501 ↗
38. S. Zhang, N. Kim, T.R. Shrout, M. Kimura, and A. Ando, Solid State Commun. 140, 154 (2006).10.1016/j.ssc.2006.08.007 ↗