journal article·2019-05

Enhancement of Tunability Properties of (Ba0.95Ca0.05)TiO3 Lead Free Ceramic by BaWO4 for Microwave Applications

Anwar Farag Ali, Abd El-razek Mahmoud, F. Gami, M. M. Nassary, S. K. S. Parashar

Journal of Electronic Materials· Volume 48· Issue 5
Publisher page

Abstract

Lead-free (1 − x)(Ba0.95Ca0.05)TiO3–xBaWO4 (abbreviation BCT–BW) (x = 0, 0.01, 0.015, and 0.02) composite ceramics have been synthesized by the sol gel method with subsequent thermal treatment at 1000°C/1200°C as calcined/sintering temperatures. Effect of BW on the structural characteristics and microstructure of the prepared compositions were investigated. X-ray diffraction analysis of pure BCT ceramic showed a tetragonal perovskite structure; however, the other compositions (x > 0) a two phases of BCT (tetragonal structure P4/mm space group) and BW (tetragonal I41/a space group) were detected. Microstructure observation confirmed presence both of spherical and elongated grains of BCT and BW, respectively. Effect of BW addition on the phase transition temperature can be neglected; however, it had a significant impact on decreasing the dielectric permittivity and increasing the thermal stability in all temperature ranges. The dielectric tunable properties of prepared compositions were analyzed, and the results showed an enhancement of BCT tunability properties by BW content. High dielectric tunability 70.12% (at 30 kV) was achieved in composite (0.98 BCT–0.02 BW) due to the lowest value of permittivity and dielectric loss in addition to ferroelectric to ferrorelaxor phase transition behavior for which it is considered a promising material for tunability applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Multiferroics and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. L.B. Kong, S. Li, T.S. Zhang, J.W. Zhai, F.Y.C. Boey, and J. Ma, Prog. Mater Sci. 55, 840 (2010).10.1016/j.pmatsci.2010.04.004 ↗
2. X.X. Xi, H.C. Li, W.D. Si, I.A. Akimov, J.R. Fox, A.M. Clark, and J.H. Hao, J. Electroceram. 4, 393 (2000).10.1023/A:1009903802688 ↗
3. A. Priya, E. Sinha, and S.K. Rout, J. Solid State Sci. 40, 20 (2013).
4. H.C. Li, W.D. Si, A.D. West, and X.X. Xi, Appl. Phys. Lett. 73, 190 (1998).10.1063/1.121751 ↗
5. S. Patel, A. Chauhan, and R. Vaish, J Solid State Sci. 10, 52 (2016).
6. C.L. Chen, H.H. Feng, Z. Zhang, A. Brazdeikis, Z.J. Huang, W.K. Chu, C.W. Chu, F.A. Miranda, F.W. Van Keuls, and R.R. Romanofsky, Appl. Phys. Lett. 75, 412 (1999).10.1063/1.124392 ↗
7. A. Outzourhit, J.U. Trefny, T. Kito, and B. Yarar, J. Mater. Res. 10, 1411 (1995).10.1557/JMR.1995.1411 ↗
8. W.T. Chang and L. Sengupta, J. Appl. Phys. 92, 3941 (2002).10.1063/1.1505669 ↗
9. M.W. Cole, P.C. Joshi, and M.H. Ervin, J. Appl. Phys. 9, 6336 (2001).10.1063/1.1366656 ↗
10. D. Rangappa, T. Fujiwara, and M. Yoshimura, J. Solid state Sci. 1074, 8 (2006).
11. M. Zhang, J. Zhai, B. Shen, and X. Yao, Mater. Res. Bull. 1045, 46 (2011).
12. E.A. Nenasheva, N.F. Kartenko, I.M. Gaidamaka, O.N. Trubitsyna, S.S. Redozubov, A.I. Dedy, and A.D. Kanareykin, J. Eur. Ceram. Soc. 395, 30 (2010).
13. X.G. Tang, K.H. Chew, and H.L.W. Chan, Appl. Phys. Lett. 991, 85 (2004).
14. A. Ahmed, I.A. Goldthorpe, and A.K. Khandani, Appl. Phys. Rev. 2, 011302 (2015).10.1063/1.4906255 ↗
15. L. Wu, Y.C. Chen, Y.P. Chou, Y.T. Tsai, and S.Y. Chu, Jpn. J. Appl. Phys. 38, 5154 (1999).10.1143/JJAP.38.5154 ↗
16. L.C. Sengupta and S. Sengupta, Mater. Res. Innov. 2, 278 (1999).10.1007/s100190050098 ↗
17. Q.W. Zhang, J.W. Zhai, and X. Yao, J. Am. Ceram. Soc. 2560, 93 (2010).
18. M.R. Panigrahi and S. Panigrahi, Phys. B 2556, 405 (2010).
19. A.E. Mahmoud, Optik 158, 870 (2018).10.1016/j.ijleo.2017.12.202 ↗
20. A.E. Mahmoud, G. Viola, A.S. Afify, A.M. Babeer, and M. Ferraris, J. Porous Mater. (2016). https://doi.org/10.1007/s10934-016-0315-8 .10.1007/s10934-016-0315-8 ↗
21. M.R. Panigrahi and S. Panigrahi, Phys. B 1787, 405 (2010).
22. J.J. Zhang, J.W. Zhai, M.W. Zhang, P. Qi, X. Yu, and X. Yao, J. Phys. D Appl. Phys. 42, 075414 (2009).10.1088/0022-3727/42/7/075414 ↗
23. A.E. Mahmoud, A.S. Afify, and A. Mohamed, J. Mater. Sci.: Mater. Electron. 28, 11591 (2017).
24. L. Cui, Y.-D. Hou, S. Wang, C. Wang, and M.-K. Zhu, J. Appl. Phys. 107, 054105 (2010).10.1063/1.3327244 ↗
25. N. Horchidan, A.C. Ianculescu, L.P. Curecheriu, F. Tudorache, V. Musteata, S. Stoleriu, N. Dragan, D. Crisan, S. Tascu, and L. Mitoseriu, J. Alloys Compd. 4731, 509 (2011).
26. J. Miao, K.H. Chew, J.X. Zhang, Q. Zhan, X.G. Xu, and Y. Jiang, Appl. Phys. Lett. 232902, 102 (2013).
27. S.G. Lee and D.S. Kang, Mater. Lett. 1629, 57 (2003).
28. K.M. Johnson, J. Appl. Phys. 33, 2826 (1962).10.1063/1.1702558 ↗
29. M. Leia, Z. Fenga, Z. Hea, B. Liub, Y. Hea, B. Lia, and Y. Xua, Ceram. Int. 8791, 41 (2015).
30. W. Zhao, R. Zuo, J. Fu, and M. Shi, J. Eur. Ceram. Soc. 2299, 34 (2014).
31. C.H. Zhang, Z. Hu, G. Gao, S. Zhao, and Y.D. Huan, J. Mater. Des. 503, 46 (2013).
32. B. Jaffe, W.R. Cook, and H.C. Jaffe, Piezoelectric Ceramics, Chapter 1, Vol. 1 (New York: Academic Press, 1971).
33. G.H. Haertling, Piezoelectric and electrooptic ceramics.Ceramic Materials for Electronics, ed. R.C. Buchanan (New York: Marcel Dekker, 1986), p. 135.
34. A. Udomporn and S. Ananta, J. Mater. Lett. 58, 1154 (2004).10.1016/j.matlet.2003.08.028 ↗
35. Manoon Sutapun, Wanwilai Vittayakorn, Rangson Muanghlua, and Naratip Vittayakorn, Mater. Des. 564, 86 (2015).
36. Lu Wenfeng Liu, Jinghui Gao Cheng, Ziwei Wang, and Shengtao Li, J. Mater. Des. 119, 136 (2017).