Investigation of Phase Formation and Poling Conditions of Lead-Free 0.48Ba(Zr0.2Ti0.8)O3–0.52(Ba0.7Ca0.3)TiO3 Ceramic
Source abstract
Abstract
A lead-free 0.48BZT/0.52BCT ceramic was successfully synthesized by the conventional method, and a perovskite 0.48BZT/0.52BCT solid solution was completely formed at 1250°C. The analysis of structure, microstructure, and dielectric property together confirmed the coexistence of tetragonal and rhombohedral phases in the sintered 0.48BZT/0.52BCT compound at room temperature. The effects of poling condition on piezoelectric properties of 0.48BZT/0.52BCT ceramic were studied. With the optimum poling condition of 20 kV/cm for 60 min in a silicon oil bath, the best values of piezo-coefficient (d33) and coupling factor (kp) were found as 542 pC/N and 0.52, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Acoustic Wave Resonator Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. S. Zhang, R. Xia, and T.R. Shrout, J. Electroceram. 19, 251 (2007).10.1007/s10832-007-9056-z ↗
2. J. Wu, D. Xiao, W. Wu, Q. Chen, J. Zhu, Z. Yang, and J. Wan, Scrip. Mater. 65, 771 (2011).10.1016/j.scriptamat.2011.07.028 ↗
3. S.F. Shao, J.L. Zhang, and Z. Zhang, J. Phys. D Appl. Phys. 41, 125408 (2008).10.1088/0022-3727/41/12/125408 ↗
4. T. Hirofumi, N. Yoshiki, T. Junji, M. Kazuya, J.H. Qiu, and T. Sadahiro, Jpn. J. Appl. Phys. 45, L30 (2006).10.1143/JJAP.45.L30 ↗
5. W. Liu and X. Ren, Phys. Rev. Lett. 103, 257602 (2009).10.1103/PhysRevLett.103.257602 ↗
6. S. Su, R. Zuo, S. Lu, Z. Xu, X. Wang, and L. Li, Curr. Appl. Phys. 11, S120 (2011).10.1016/j.cap.2011.01.034 ↗
7. D. Xue, Y. Zhou, H. Bao, C. Zhou, and J. Gao, J. Appl. Phys. 109, 054110 (2011).10.1063/1.3549173 ↗
8. X. Huang, M. Huang, and C. Gao, Adv. Mater. Res. 760–762, 763 (2013).10.4028/www.scientific.net/AMR.760-762.763 ↗
9. D.A. Tuan, V.T. Tung, T.V. Chuong, and L.V. Hong, Int. J. Mod. Phys. B 31, 1650258 (2017).10.1142/S0217979216502581 ↗
10. C.-X. Li, B. Yang, S.-T. Zhang, R. Zhang, and W.-W. Cao, Ceram. Int. 39, 2967 (2013).10.1016/j.ceramint.2012.09.073 ↗
11. H.T. Kim, T. Shrout, C. Randall, and M. Lanagan, J. Am. Ceram. Soc. 85, 2738 (2002).10.1111/j.1151-2916.2002.tb00522.x ↗
12. J. Wu, D. Xiao, W. Wu, Q. Chen, J. Zhu, Z. Yang, and J. Wang, J. Euro. Ceram. Soc. 32, 891 (2012).10.1016/j.jeurceramsoc.2011.11.003 ↗
13. D.A. Tuan, N.T. Tinh, V.T. Tung, and T.V. Chuong, Mater. Trans. 56, 1370 (2015).10.2320/matertrans.MA201511 ↗
14. D.A. Tuan, V.T. Tung, T. Van Chuong, N.T. Tinh, and N.T.M. Huong, Indian J. Pure Appl. Phys. 53, 409 (2015).
15. D.A. Tuan, V.T. Tung, T.V. Chuong, and L.V. Hong, Int. J. Mod. Phys. B 29, 1550231 (2015).10.1142/S0217979215502318 ↗
16. American National Standards Institute: An American National Standard: IEEE Standard on Piezoelectricity. 1987; ANSI/IEEE Std 176–1987.
17. W. Li, Z. Xu, R. Chu, P. Fu, and G. Zang, Mater. Sci. Eng. B 176, 65 (2011).10.1016/j.mseb.2010.09.003 ↗
18. W. Wang, W.L. Li, D. Xu, W.P. Cao, Y.F. Hou, and W.D. Fei, Ceram. Int. 40, 3933 (2014).10.1016/j.ceramint.2013.08.037 ↗
19. Y. Cui, X. Liu, M. Jiang, Y. Hu, Q. Su, and H. Wang, J. Mater. Sci. Mater. Electron. 23, 1342 (2012).10.1007/s10854-011-0596-2 ↗
20. L. Zhang, Q. Sun, W. Ma, Y. Zhang, and H. Liu, J. Mater. Sci. Mater. Electron. 23, 688 (2012).10.1007/s10854-011-0472-0 ↗
21. A. Hussain, C.W. Ahn, J.S. Lee, A. Ullah, and I.W. Kim, Sens. Actuators A 158, 84 (2010).10.1016/j.sna.2009.12.027 ↗
22. Y. Qin, J. Zhang, W. Yao, C. Lu, and S. Zhang, A.C.S. Appl. Mater. Interfaces 8, 7257 (2016).10.1021/acsami.6b00377 ↗