A Study of Difference in Reflow Characteristics Between Electroplated and Sputtered Cu in a Dual-Damascene Fabrication Process for Silicon Semiconductor Devices
Source abstract
Abstract
The difference in reflow characteristics between electroplated and sputtered Cu films during high-temperature high-pressure treatment was confirmed, and the basis for this difference was analyzed. Using test element groups containing a number of via holes, it was found that electroplated Cu films had much superior embedding characteristics compared with sputtered Cu films. This was confirmed by measurements of the stress–strain curves of these Cu films, which indicated that the strength at high temperature of the electroplated films was lower than that of sputtered films. Identification of lattice defects and analysis of the microstructure of these films were carried out by positron lifetime measurements and transmission electron microscopy, respectively. The results showed that a large quantity of vacancy clusters was present in the electroplated Cu films, and this increased to a maximum after isochronal annealing at 300°C. From the results, it was shown that Cu atoms in electroplated films with a large number of vacancy clusters diffuse rapidly at around 300°C, and this rapid diffusion contributes greatly to softening of the film and a promotion in reflow behavior. This study revealed that the reflow behavior of Cu films strongly depends on the presence of vacancy clusters within it.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Copper Interconnects and Reliability · Muon and positron interactions and applications · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. P. Singer, Semiconductor International November 1997 (1997), pp. 67–70.
2. P. Gwynne, IBM Research No. 4, 1997 (1997), pp. 17–22.
3. A.E. Braun, Semiconductor International April 1999 (1999), pp. 58–66.
4. K. Sekiguchi, J. Koike, S. Kamiya, M. Saka, and K. Maruyama, Appl. Phys. Lett. 79, 1264 (2001).10.1063/1.1399021 ↗
5. S. Konishi, M. Moriyama, and M. Murakami, Mater. Trans. 43, 1624 (2002).10.2320/matertrans.43.1624 ↗
6. A. Hobbs, S. Murakami, T. Hosoda, S. Ohtsuka, M. Miyajima, S. Sugatani, and T. Nakamura, Mater. Trans. 43, 1629 (2002).10.2320/matertrans.43.1629 ↗
7. B. Li, T.D. Sullivan, T.C. Lee, and D. Badami, Microelectron. Reliab. 44, 365 (2004).10.1016/j.microrel.2003.11.004 ↗
8. K. Abe, Y. Harada, M. Yoshimaru, and H. Onoda, J. Vac. Sci. Technol. 22, 721 (2004).10.1116/1.1676618 ↗
9. T.C. Wang, T.E. Hsieh, M.T. Wang, D.S. Su, C.H. Chang, Y.L. Wang, and J.Y. Lee, J. Electrochem. Soc. 152, G45 (2005).10.1149/1.1828419 ↗
10. M.H. Lin, Y.L. Lin, K.P. Chang, K.C. Su, and T. Wang, Jpn. J. Appl. Phys. 45, 700 (2006).10.1143/JJAP.45.700 ↗
11. H. Tsuchikawa, Y. Mizushima, T. Nakamura, T. Suzuki, and H. Nakajima, Jpn. J. Appl. Phys. 45, 714 (2006).10.1143/JJAP.45.714 ↗
12. T. Onishi, H. Fujii, J. Munemasa, and T. Yoshikawa, Advanced Metallization Conference Asian Session 2001, ed. by A.J. McKerrow, Y. Shacham-Diamond, S. Zaima, and T. Ohba (Warrendale, PA: Materials Research Society, 2001) pp. 245–250.
13. T. Onishi and T. Yoshikawa, Mater. Trans. 43, 1605 (2002).10.2320/matertrans.43.1605 ↗
14. K. Suzuki, T. Masui, T. Fujikawa, Y. Taguchi, and T. Kondo, Advanced Metallization Conference 1999, ed. by M.E. Gross, T. Gessner, N. Kobayashi, and Y. Yasuda (Warrendale, PA: Materials Research Society, 1999) pp. 155–160.
15. C. Lingk and M.E. Gross, J. Appl. Phys. 84, 5547 (1998).10.1063/1.368856 ↗
16. J.M.E. Harper, C. Cabral Jr., C. Andricacos, L. Gignac, I.C. Noyan, K.P. Rodbell, and C.K. Hu, J. Appl. Phys. 86, 2516 (1999).10.1063/1.371086 ↗
17. K. Ueno, J. Appl. Phys. 86, 4930 (1999).10.1063/1.371462 ↗
18. C. Lingk, M.E. Gross, and W.L. Brown, J. Appl. Phys. 87, 2232 (2000).10.1063/1.372166 ↗
19. H. Wendrock, W. Brukner, M. Hecker, T.G. Koetter, and H. Schloerb, Microelectron. Reliab. 40, 1301 (2000).10.1016/S0026-2714(00)00145-1 ↗
20. W.H. The, L.T. Koh, S.M. Chen, J. Xie, C.Y. Li, and P.D. Foo, Microelectron. J. 32, 579 (2001).10.1016/S0026-2692(01)00035-0 ↗
21. M.W. Lane, C.E. Murray, F.R. McFeely, P.M. Vereecken, and R. Rosenburg, Appl. Phys. Lett. 83, 2330 (2003).10.1063/1.1610256 ↗
22. T. Fujikawa, K. Suzuki, T. Masui, and T. Onishi, Advanced Metallization Conference 1999, ed. by M.E. Gross, T. Gessner, N. Kobayashi, and Y. Yasuda (Warrendale, PA: Materials Research Society, 1999) pp. 105–108.
23. T. Fujikawa, T. Yoshikawa, T. Onishi, and T. Sato, Jpn. J. Appl. Phys. 40, 2191 (2001).10.1143/JJAP.40.2191 ↗
24. T. Onishi, M. Mizuno, T. Yoshikawa, J. Munemasa, T. Inoue, A. Miyagaki, H. Nakamoto, and T. Onoda, J. Electron. Mater. 39, 318 (2010).10.1007/s11664-010-1081-z ↗
25. T. Onishi, H. Fujii, T. Yoshikawa, J. Munemasa, T. Inoue, and A. Miyagaki, Thin Solid Films 425, 265 (2003).10.1016/S0040-6090(02)01120-3 ↗
26. S.H. Brongersma, E. Richard, I. Vervoort, H. Bender, W. Vandervorst, S. Lagrange, G. Beyer, and K. Maex, J. Appl. Phys. 86, 3642 (1999).10.1063/1.371272 ↗
27. M.S. Yoon, Y.J. Park, and Y.C. Joo, Thin Solid Films 408, 230 (2002).10.1016/S0040-6090(02)00126-8 ↗
28. T. Nakagawa, Circuit World 29, 22 (2003).10.1108/03056120310460784 ↗
29. M. Stangl, M. Liptak, A. Fletcher, J. Acker, J. Thomas, H. Wendrock, S. Oswald, and K. Wezig, Microelectron. Eng. 85, 534 (2008).10.1016/j.mee.2007.09.007 ↗
30. P.A. Flinn, D.S. Gardner, and W.D. Nix, IEEE Trans. Electron. Dev. ED 34, 689 (1987).10.1109/T-ED.1987.22981 ↗
31. P. Hautojaervi, ed., Positrons in Solids (Berlin, Heidelberg, New York: Springer-Verlag, 1979).
32. W. Brandt and A. Dupasquier, eds., Positron Solid-State Physics (Amsterdam, New York, Oxford: North Holland, 1983).
33. A. Dupasquier and A.P. Mills Jr., eds., Positron Spectroscopy of Solids (Amsterdam, Oxford, Tokyo, Washington, DC: IOS Press, 1995).
34. P. Kirkegaard, M. Eldrup, O.E. Morgensen, and N. Pedersen, Comput. Phys. Commun. 23, 307 (1981).10.1016/0010-4655(81)90006-0 ↗
35. P. Kirkegaard and M. Eldrup, Comput. Phys. Commun. 3, 240 (1972).10.1016/0010-4655(72)90070-7 ↗
36. P. Kirkegaard and M. Eldrup, Comput. Phys. Commun. 7, 401 (1974).10.1016/0010-4655(74)90070-8 ↗
37. M. Eldrup, O.E. Mogensent, and J.H. Evans, J. Phys. F: Metal Phys. 6, 499 (1976).10.1088/0305-4608/6/4/011 ↗
38. M. Mizuno, T. Kihara, H. Araki, Y. Shirai, and T. Onishi, Bull. Soc. DV-Xα 19, 198 (2006).
39. T. Suzuki, A. Uedono, T. Nakamura, Y. Mizushima, H. Kitada, and Y. Koura, Proceedings of IEEE 2004 International Interconnect Technology Conference (2004), pp. 87–89.
40. A. Uedono, T. Suzuki, and T. Nakamura, J. Appl. Phys. 95, 913 (2005).10.1063/1.1635648 ↗
41. A. Uedono, T. Suzuki, T. Nakamura, T. Ohdaira, and R. Suzuki, J. Appl. Phys. 98, 043504 (2005).10.1063/1.2009813 ↗
42. M. Eldrup and B.N. Singh, J. Nucl. Mater. 276, 269 (2000).10.1016/S0022-3115(99)00186-5 ↗
43. R. Schaublin, Z. Yao, P. Spatig, and M. Victoria, Mater. Sci. Eng. A400–401, 251 (2005).10.1016/j.msea.2005.03.093 ↗