Morphology and Dielectric Studies of Natural Fibers and PbO2 Based Flexible Composite Sheets for Potential Energy Storage Applications
Source abstract
Abstract
In this modern age of technology, flexible, light-weight, environment-friendly and low-cost electrodes are vastly feasible for applications in energy storage devices and disposable electronics. This study presents a comprehensive report on the morphological, dielectric, and impedance characteristics of lignocellulose (LC) fibers, PbO2, and LC/PbO2 sheets. The dielectric analysis shows that the dielectric constant depends on space charge polarization in the case of LC/PbO2 composite sheets. It can be concluded from impedance spectroscopy results that LC fibers show semiconductor-like behavior and fibers appear to consist of one type of dielectric species whose impedance behavior can be modeled by a parallel combination of a resistor and a capacitor. However, the impedance response of PbO2 consists of two types of dielectric species, which can be identified as grains and grain boundaries, both of which show a small temperature dependence. The impedance behavior of LC/PbO2 composite is different in comparison to individual LC fibers and PbO2. The presented study also reveals that impedance parameters of fabricated LC/PbO2 composites are temperature-independent, which might be due to counteracting the characteristics of LC fibers and PbO2 particles. This temperature-independence of the composite is important for their use in applications in flexible devices.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Dielectric materials and actuators · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. S. Peng, L. Li, J.K.Y. Lee, L. Tian, M. Srinivasan, S. Adams, and S. Ramakrishna, Nano Energy 22, 361 (2016).10.1016/j.nanoen.2016.02.001 ↗
2. R.F. Service, Science (New York, NY) 301, 909 (2003).10.1126/science.301.5635.909 ↗
3. B.C.K. Tee, C. Wang, R. Allen, and Z. Bao, Nat. Nanotechnol. 7, 825 (2012).10.1038/nnano.2012.192 ↗
4. Z. Fan, H. Razavi, J. Do, A. Moriwaki, O. Ergen, Y.-L. Chueh, P.W. Leu, J.C. Ho, T. Takahashi, and L.A. Reichertz, Nat. Mater. 8, 648 (2009).10.1038/nmat2493 ↗
5. M.C. McAlpine, H. Ahmad, D. Wang, and J.R. Heath, Nat. Mater. 6, 379 (2007).10.1038/nmat1891 ↗
6. L. Huang, G. Bai, M. Wong, Z. Yang, W. Xu, and J. Hao, Adv. Mater. 28, 2744 (2016).10.1002/adma.201505839 ↗
7. B. Yao, L. Huang, J. Zhang, X. Gao, J. Wu, Y. Cheng, X. Xiao, B. Wang, Y. Li, and J. Zhou, Adv. Mater. 28, 6353 (2016).10.1002/adma.201600529 ↗
8. L. Hu, J.W. Choi, Y. Yang, S. Jeong, F. La Mantia, L.-F. Cui, and Y. Cui, Proc. Natl. Acad. Sci. 106, 21490 (2009).10.1073/pnas.0908858106 ↗
9. L. Yuan, B. Yao, B. Hu, K. Huo, W. Chen, and J. Zhou, Energy Environ. Sci. 6, 470 (2013).10.1039/c2ee23977a ↗
10. B. Yao, L. Yuan, X. Xiao, J. Zhang, Y. Qi, J. Zhou, J. Zhou, B. Hu, and W. Chen, Nano Energy 2, 1071 (2013).10.1016/j.nanoen.2013.09.002 ↗
11. X. Ji, K.T. Lee, and L.F. Nazar, Nat. Mater. 8, 500 (2009).10.1038/nmat2460 ↗
12. Q. Liu, L. Li, J. Xu, Z. Chang, D. Xu, Y. Yin, X. Yang, T. Liu, Y. Jiang, and J. Yan, Adv. Mater. 27, 8095 (2015).10.1002/adma.201503025 ↗
13. G. Zhou, F. Li, and H.-M. Cheng, Energy Environ. Sci. 7, 1307 (2014).10.1039/C3EE43182G ↗
14. J. Zhu, S. Tang, J. Wu, X. Shi, B. Zhu, and X. Meng, Adv. Energy Mater. 7, 1601234 (2017).10.1002/aenm.201601234 ↗
15. B. Scrosati, Nature 373, 557 (1995).10.1038/373557a0 ↗
16. J.-M. Tarascon and M. Armand, in Mater. Sustain. Energy A Collect. Peer-Reviewed Res. Rev. Artic. from Nat. Publ. Gr. (World Scientific, 2011), pp. 171–179.10.1142/9789814317665_0024 ↗
17. F.M. Al-Oqla, O.Y. Alothman, M. Jawaid, S.M. Sapuan, and M.H. Es-Saheb, Biomass and Bioenergy, ed. K.R. Hakeem, M. Jawaid, and U. Rashi (New York: Springer, 2014), pp. 1–25.
18. F.M. Al-Oqla and S.M. Sapuan, J. Clean. Prod. 66, 347 (2014).10.1016/j.jclepro.2013.10.050 ↗
19. F.M. Al-Oqla, S.M. Sapuan, T. Anwer, M. Jawaid, and M.E. Hoque, Synth. Met. 206, 42 (2015).10.1016/j.synthmet.2015.04.014 ↗
20. F.M. Al-Oqla, S.M. Sapuan, M.R. Ishak, and A.A. Nuraini, Int. J. Polym. Anal. Charact. 20, 191 (2015).10.1080/1023666X.2015.990184 ↗
21. A.A.A. Darwish, E.F.M. El-Zaidia, M.M. El-Nahass, T.A. Hanafy, and A.A. Al-Zubaidi, J. Alloys Compd. 589, 393 (2014).10.1016/j.jallcom.2013.11.218 ↗
22. S. Pandey, D. Kumar, O. Parkash, and L. Pandey, in Ceram. Mater.—Synth. Charact. Appl. Recycl. (IntechOpen, 2019).
23. L. Pandey, O.M. Parkash, R.K. Katare, and D. Kumar, Bull. Mater. Sci. 18, 563 (1995).10.1007/BF02744842 ↗