A Temperature Sensor Based on Al/p-Si/CuCdO2/Al Diode for Low Temperature Applications
Source abstract
Abstract
CuCdO2 delafossite oxide film as an interface layer was coated by sol–gel spin coating on p-Si substrate, and thus an Al/p-Si/CuCdO2/Al diode was fabricated. Scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS) was used to obtain an image of the CuCdO2 oxide film. The temperature-dependent behavior of the diode was studied by current–voltage (I–V) and capacitance/conductance–voltage (C/G–V) measurements over the 100–400 K temperature range. It is observed that the ideality factor (n) decreases and zero-bias barrier height (Φb0) increases with an increase in temperature. This abnormal behavior of n and Φb0 is attributed to barrier inhomogeneities by assuming Gaussian distribution (GD) at the metal–semiconductor interface. For each temperature, the barrier height values obtained from both the conventional I–V and Norde method show good agreement with each other. The I–V–T characteristics have shown the GD, giving a mean barrier height ($$ {\bar{\Phi }}b0 $$) of 1.04 eV and a standard deviation (σs) of 0.12 V. A modified Richardson plot of [ln(I0/T2) − q2σs2/2k2T2 versus q/kT] yields $$ {\bar{\Phi }}b0 $$ and A* as 1.06 eV and 31.21 A cm−2 K−2 (indicating an agreement with the theoretical value of 32 A cm−2 K−2), showing the promise of CuCdO2/Si as temperature sensing with a Schottky junction. In addition, C–V and G–V measurements show that the C value decreases and the G value increases as the frequency increases, depending on a continuous distribution of interface states. Also, the capacitance and the conductance values decrease with increasing temperature. The results suggest that Al/p-Si/CuCdO2/Al diode can be used for temperature sensing applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Semiconductor materials and interfaces · Semiconductor materials and devices · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. F. Trani, J. Vidal, S. Botti, and M.A.L. Marques, Phys. Rev. B 82, 085115 (2010).10.1103/PhysRevB.82.085115 ↗
2. E. Guilmeau, A. Maignan, and C. Martin, J. Electron. Mater. 38, 1104 (2009).10.1007/s11664-009-0815-2 ↗
3. K.G. Godinho, B.J. Morgan, J.P. Allen, D.O. Scanlon, and G.W. Watson, J. Phys. Condens. Matter 23, 334201 (2011).10.1088/0953-8984/23/33/334201 ↗
4. M. Yu, T.I. Draskovic, and Y. Wu, Phys. Chem. Chem. Phys. 16, 5026 (2014).10.1039/c3cp55457k ↗
5. C. Ruttanapun, J. Appl. Phys. 114, 113108 (2013).10.1063/1.4821960 ↗
6. M. Snure and A. Tiwaria, Appl. Phys. Lett. 91, 092123 (2007).10.1063/1.2778755 ↗
7. A. Stadler, Materials 5, 661 (2012).10.3390/ma5040661 ↗
8. M. Mansoor, I. Haneef, S. Akhtar, A. De Luca, and F. Udrea, Sens. Actuators A 232, 63 (2015).10.1016/j.sna.2015.04.022 ↗
9. S. Santra, P.K. Guha, S.Z. Ali, I. Haneef, and F. Udrea, IEEE Sens. J. 10, 997 (2010).10.1109/JSEN.2009.2037822 ↗
10. A. De Luca, V. Pathirana, S.Z. Ali, D. Dragomirescu, and F. Udrea, Sens. Actuators A 222, 31 (2015).10.1016/j.sna.2014.11.023 ↗
11. E.H. Rhoderick and R.H. Williams, Metal-Semiconductor Contacts, 2nd ed. (Oxford: Clarendon Press, 1988).
12. S.M. Sze and K.K. Ng, Physics of Semiconductor Devices, 3rd ed. (Chichester: Wiley, 2007).
13. B.L. Sharma, Metal-Semiconductor Schottky Barrier Junctions and Their Applications (New York: Plenum, 1984).10.1007/978-1-4684-4655-5 ↗
14. R.T. Tung, Phys. Rev. B 45, 13509 (1992).10.1103/PhysRevB.45.13509 ↗
15. J.H. Werner and H.H. Guttler, J. Appl. Phys. 69, 1522 (1991).10.1063/1.347243 ↗
16. R.O. Ocaya, A. Al-Ghamdi, F. El-Tantawy, W.A. Farooq, and F. Yakuphanoglu, J. Alloys Compd. 674, 277 (2016).10.1016/j.jallcom.2016.02.267 ↗
17. I. Jyothi, H.-D. Yang, K.-H. Shim, V. Janardhanam, S.-M. Kang, H. Hong, and C.-J. Choi, Mater. Trans. 54, 1655 (2013).10.2320/matertrans.M2013015 ↗
18. M. Soylu and H.S. Kader, J. Electron. Mater. 45, 5756 (2016).10.1007/s11664-016-4819-4 ↗
19. V.S. Nirwal, K.R. Peta, V.R. Reddy, and M.D. Kim, J. Alloys Compd. 705, 782 (2017).10.1016/j.jallcom.2017.02.162 ↗
20. Ş. Karataş, Ş. Altındal, A. Türüt, and M. Cakar, Phys. B 392, 43 (2007).10.1016/j.physb.2006.10.039 ↗
21. B. Asha, C.S. Harsha, R. Padma, and V.R. Reddy, J. Electron. Mater. 47, 4140 (2018).10.1007/s11664-018-6313-7 ↗
22. Ç. Oruç and A. Altındal, Appl. Phys. A 124, 81 (2018).10.1007/s00339-017-1461-9 ↗
23. H. Norde, J. Appl. Phys. 50, 5052 (1979).10.1063/1.325607 ↗
24. M. Gedikpınar, M. Cavas, Z.A. Alahmed, and F. Yakuphanoglu, Superlatt. Microstr. 59, 123 (2013).10.1016/j.spmi.2013.03.028 ↗
25. A. Kumar, S. Arafin, M.C. Amann, and R. Singh, Nanoscale Res. Lett. 8, 481 (2013).10.1186/1556-276X-8-481 ↗
26. S.S. Naik and V.R. Reddy, Adv. Mat. Lett. 3, 188 (2012).10.5185/amlett.2012.1316 ↗
27. A. Tataroğlu and F.Z. Pür, Phys. Scr. 88, 015801 (2013).10.1088/0031-8949/88/01/015801 ↗
28. R.K. Gupta, K. Ghosh, and P.K. Kahol, Phys. E 41, 876 (2009).10.1016/j.physe.2008.12.025 ↗
29. K. Moraki, S. Bengi, S. Zeyrek, M.M. Bülbül, and Ş. Altındal, J. Mater. Sci. 28, 3987 (2017).
30. A. Tataroğlu and S. Altındal, J. Alloys Compd. 479, 893 (2009).10.1016/j.jallcom.2009.01.098 ↗
31. E.H. Nicollian and J.R. Brews, MOS Physics and Technology (New York: Wiley, 1982).
32. A. Buyukbas, A. Tataroglu, and M. Balbasi, J. Nanoelectron. Optoelectron. 10, 675 (2015).10.1166/jno.2015.1824 ↗
33. R. Padma, K. Sreenu, and V.R. Reddy, J. Alloys Compd. 695, 2587 (2017).10.1016/j.jallcom.2016.11.165 ↗
34. B.A. Gozeh, A. Karabulut, A. Yildiz, and F. Yakuphanoglu, J. Alloys Compd. 732, 16 (2018).10.1016/j.jallcom.2017.10.167 ↗
35. E. Kadri, M. Khlifi, M. Krichen, K. Khirouni, and A. Zouari, Opt. Quant. Electron. 49, 13 (2017).10.1007/s11082-016-0846-x ↗
36. Z. Rebaoui, W.B. Bouiajra, M.A. Abid, A. Saidane, D. Jammel, M. Henini, and J.F. Felix, Microelectron. Eng. 171, 11 (2017).10.1016/j.mee.2017.01.010 ↗
37. S. Hlali, A. Farji, N. Hizem, L. Militaru, A. Kalboussi, and A. Souifi, J. Alloys Compd. 713, 194 (2017).10.1016/j.jallcom.2017.04.165 ↗
38. M.S.P. Reddy, P.T. Puneetha, Y.-W. Lee, S.-H. Jeong, and C. Park, Poly. Testing 59, 107 (2017).10.1016/j.polymertesting.2017.01.016 ↗
39. E.H. Nicollian and A. Goetzberger, Bell Syst. Tech. J. 46, 1055 (1967).10.1002/j.1538-7305.1967.tb01727.x ↗
40. S. Mahato and J. Puigdollers, Phys. B Phys. Condens. Matter 530, 327 (2018).10.1016/j.physb.2017.10.068 ↗