Effect of Acid Doping on Junction Characteristics of ITO/Polyaniline/N719/Ag Diode
Source abstract
Abstract
In this paper, we demonstrate the fabrication and electrical characterization of a heterojunction Schottky diode between polyaniline (PANI) and a ruthenium-based organic semiconductor (N719). In this system, PANI behaves as an organic p-type conducting polymer while N719 acts as an n-type semiconductor. The fabrication was carried out using different methods to deposit each component: solution casting for PANI, spray coating for N719, and screen-printing for silver paste. The PANI film was doped by soaking it in HCl solutions of different concentrations to form emeraldine salt, i.e., a conductive type of PANI. Electrical characterizations of PANI and the diode were performed using conductivity and current density–voltage (J–V) measurements. The maximum conductivity of PANI was obtained at 3.18 × 10−2 S/cm using an HCl concentration of 1 M. The fabricated diode exhibited a low Schottky barrier (ΦB = 0.48 eV) and rectifying behavior (γ ∼ 9) with moderate ideality factor (η ∼ 8). Acid doping of PANI caused better diode performance and an increase in current density by four orders of magnitude.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Conducting polymers and applications · Organic Electronics and Photovoltaics · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. J. Huang, Pure Appl. Chem. 78, 15 (2006).10.1351/pac200678010015 ↗
2. R. Wang, L. Huang, and X. Tian, J. Phys. Chem. C 116, 13120 (2012).10.1021/jp3017612 ↗
3. J. Stejskal, P. Kratochvil, and A.D. Jenkins, Polym 37, 367 (1996).10.1016/0032-3861(96)81113-X ↗
4. M. Deniz and H. Deligöz, Colloids Surf. A 563, 206 (2019).10.1016/j.colsurfa.2018.12.014 ↗
5. M.R. Choi, S.H. Woo, T.H. Han, K.G. Lim, S.Y. Min, T.W. Lee, W.M. Yun, O.K. Kwon, C.E. Park, K.D. Kim, H.K. Shin, M.S. Kim, T. Noh, J.H. Park, K.H. Shin, and J. Jang, ChemSusChem 4, 363 (2011).10.1002/cssc.201000338 ↗
6. Z. Mo, W. Qui, X.C. Yang, and J. Yan, J. Pol. Res. 16, 39 (2009).10.1007/s10965-008-9200-8 ↗
7. J.H. Cheung, A.F. Fou, and M.F. Rubner, Thin Solid Films 84, 985 (1994).10.1016/0040-6090(94)90616-5 ↗
8. D. Chinn, J. DuBow, J. Li, J. Janata, and M. Josowicz, Chem. Mater. 7, 1510 (1995).10.1021/cm00056a017 ↗
9. N.E. Agbor, M.C. Petty, and A.P. Monkman, Sens. Actuators B Chem. 28, 173 (1995).10.1016/0925-4005(95)01725-9 ↗
10. J.C. Chiang and A.G. Macdiarmid, Synth. Met. 13, 193 (1986).10.1016/0379-6779(86)90070-6 ↗
11. D.W. Hatchett, M. Josowicz, and J. Janata, J. Phys. Chem. B 103, 10992 (1999).10.1021/jp991110z ↗
12. A.G. MacDiarmid and A.J. Epstein, Synth. Met. 69, 85 (1995).10.1016/0379-6779(94)02374-8 ↗
13. Y. Noskov, A. Sorochinsky, V. Kukhar, and A. Pud, ACS Omega 4, 7400 (2019).10.1021/acsomega.9b00207 ↗
14. D. Yaohua and M. Shaoli, Electrochim. Acta 36, 2015 (1991).10.1016/0013-4686(91)85087-N ↗
15. S. Ahn, M.H. Park, S.H. Jeong, Y.H. Kim, J. Park, S. Kim, H. Kim, H. Cho, C. Wolf, M. Pei, H. Yang, and T.W. Lee, Adv. Funct. Mater. 1807535, 1 (2018).
16. C. Li, Y. Wang, M. Wan, and S. Li, Synth. Met. 39, 91 (1990).10.1016/0379-6779(90)90201-U ↗
17. S.A. Chen, K.R. Chuang, C.I. Chao, and H.T. Lee, Synth. Met. 82, 207 (1996).10.1016/S0379-6779(96)03790-3 ↗
18. P.J. Saikia and P.C. Sarmah, Mat. Sci. Appl. 2, 1022 (2011).
19. N.S. Singh, L. Kumar, A. Kumar, S. Vaisakh, S.D. Singh, K. Sisodiya, S. Srivastava, M. Kansal, S. Rawat, and T.A. Singh, Tanya, Anita. Mater. Sci. Semicond. Process. 60, 29 (2017).10.1016/j.mssp.2016.12.021 ↗
20. S.K. Dey, S. Baglari, and D. Sarka, Indian J. Phys. 90, 29 (2016).10.1007/s12648-015-0723-7 ↗
21. J.M. Ghushe, S.M. Giripunje, and S.B. Kondawar, J. Phys. Sci. 28, 99 (2017).10.21315/jps2017.28.1.8 ↗
22. M. Trchova and J. Stejskal, Pure Appl. Chem. 83, 1803 (2011).10.1351/PAC-REP-10-02-01 ↗
23. Y. Wei, X. Tang, and Y. Sun, J. Pol. Sci. 27, 2385 (1989).10.1002/pola.1989.080270720 ↗
24. R. Singh, V. Arora, R.P. Tandon, S. Chandra, and A. Mansingh, J. Mater. Sci. 33, 2067 (1998).10.1023/A:1004358800788 ↗
25. S. Chen and Y. Fang, Synth. Met. 60, 215 (1993).10.1016/0379-6779(93)91282-7 ↗
26. H. Tomozawa, F. Braun, S. Phillps, A.J. Heeger, and H. Kroemer, Synth. Met. 22, 63 (1987).10.1016/0379-6779(87)90571-6 ↗
27. E.H. Rhoderick, Metal-Semiconductor Contacts (Monographs in Electrical and Electronic Engineering (Oxford: Clarendon Press, 1978), p. 96.
28. S.M. Sze, Physics of Semiconductor Devices (New York: Wiley, 1971).
29. S. Boughdachi, Y. Badali, Y. Azizian-kalandaragh, and S. Altindal, J. Elect. Mat. (2018). https://doi.org/10.1007/s11664-018-6593-y.10.1007/s11664-018-6593-y ↗
30. N.S. Singh, L. Kumar, A. Kumar, S. Vaisakh, S.D. Singh, K. Sisodiya, S. Srivastava, M. Kansal, S. Rawat, and ThA Singh, Tanya, Anita. Mat. Sci. Semicond. Process. 60, 29 (2017).10.1016/j.mssp.2016.12.021 ↗
31. S.K. Dey, S. Baglari, and D. Sarkar, Indian. J Phys. 90, 29 (2016).
32. L. Pereira, Organic Light-Emitting Diodes: The Use of Rare-Earth and Transition Metals (Boca Raton: Pan Stanford Publishing, 2012), pp. 48–93.10.1201/b12309 ↗
33. S. Angappane, N. Rajeev Kimi, T.S. Natarajan, G. Rangarajan, and B. Wessling, Thin Solid Films 417, 202 (2002).10.1016/S0040-6090(02)00576-X ↗
34. J.C.W. Chien, Polyacetylene: Chemistry, Physics, and Material Science (Orlando: Academic Press, 1984), p. 581.