journal article·2020-03

Annealing Temperature Dependence of ZTO Thin Film Properties and Its Application on Thin Film Transistors by Inkjet Printing

Sang Ouk Ryu, Cheul Ho Ha, Ho Young Jun, Si Ok Ryu

Journal of Electronic Materials· Volume 49· Issue 3
Publisher page

Abstract

In this study, inkjet-printed zinc tin oxide:Cl (ZTO:Cl) thin films were analyzed using x-ray diffraction, x-ray photoelectron spectroscopy (XPS) and all the films were annealed at temperatures ranging from 100°C to 600°C. XPS analysis showed that the formation of metal-oxide bonds in the films was complete with annealing temperatures at or above 500°C. Furthermore, inkjet-printed thin film transistors (TFTs) were examined using scanning electron microscopy and current–voltage characteristic measurements. The ZTO:Cl TFTs performed best when annealed at 500°C. The average carrier mobility and the on/off ratio were found to be 2.71 cm2/V s and 1.82 × 107, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thin-Film Transistor Technologies · ZnO doping and properties · Transition Metal Oxide Nanomaterials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. E.M. Fortunato, L.M. Pereira, P.M. Barquinha, A.M. Botelho do Rego, G. Gonçalves, A. Vilà, J.R. Morante, and R.F. Martins, Appl. Phys. Lett. 92, 222103 (2008).10.1063/1.2937473 ↗
2. K. Nomura, H. Ohta, A. Takagi, T. Kamiya, M. Hirano, and H. Hosono, Nature 432, 488 (2004).10.1038/nature03090 ↗
3. C. Li, Y. Li, Y. Wu, B. Ong, and R. Loutfy, J. Mater. Chem. 19, 1626 (2009).10.1039/b812047a ↗
4. T. Jun, K. Song, Y. Jeong, K. Woo, D. Kim, C. Bae, and J. Moon, J. Mater. Chem. 21, 1102 (2011).10.1039/C0JM02178D ↗
5. C. Choi, S. Han, Y. Su, Z. Fang, L. Lin, C. Cheng, and C. Chang, J. Mater. Chem. C 3, 854 (2015).10.1039/C4TC01568A ↗
6. L. Petti, H. Faber, N. Münzenrieder, G. Cantarella, P.A. Patsalas, G. Tröster, and T.D. Anthopoulos, Appl. Phys. Lett. 106, 092105 (2015).10.1063/1.4914085 ↗
7. D. Lee, Y. Chang, W. Stickle, and C. Chang, Electrochem. Solid-State Lett. 10, K51 (2007).10.1149/1.2773531 ↗
8. R. Presley, C. Munsee, C. Park, D. Hong, J. Wager, and D. Keszler, J. Phys. D 37, 2810 (2004).10.1088/0022-3727/37/20/006 ↗
9. K. Nomura, H. Ohta, K. Ueda, T. Kamiya, M. Hirano, and H. Hosono, Science 300, 1269 (2003).10.1126/science.1083212 ↗
10. K. Everaerts, L. Zeng, J.W. Hennek, D.I. Camacho, D. Jariwala, M.J. Bedzyk, M.C. Hersam, and T.J. Marks, ACS Appl. Mater. Interface 5, 11884 (2013).10.1021/am403585n ↗
11. M.G. McDowell and I.G. Hill IEEE Trans. Electron Devices 56, 343–347 (2009).10.1109/TED.2008.2011679 ↗
12. C.G. Choi, S. Seo, and B. Bae, Electrochem. Solid-State Lett. 11, H7–H9 (2008).10.1149/1.2800562 ↗
13. S. Jeong, Y. Jeong, and J. Moon, J. Mater. Chem. C 112, 11082 (2008).
14. J. Jeon, Y.H. Hwang, J. Jin, and B. Bae, MRS Commun. 2, 17 (2012).10.1557/mrc.2012.1 ↗
15. V.A. Kumar, T. Uchida, T. Mizuki, Y. Nakajima, Y. Katsube, T. Hanajiri, and T. Maekawa, Adv. Nat. Sci. Nanosci. Nanotechnol. 7, 015002 (2016).10.1088/2043-6262/7/1/015002 ↗
16. J. Gonzalez-Dominguez, P. Castell, S. Bespin-Gascon, A. Anson-Casaos, A. Diez-Pascual, M. Gomez-Fatou, A. Benito, W. Maser, and M. Martinez, J. Mater. Chem. 22, 21285 (2012).10.1039/c2jm35272a ↗
17. P. Parent, J. Lasne, G. Marcotte, and C. Laffon, Phys. Chem. Chem. Phys. 13, 7142 (2011).10.1039/c0cp02864a ↗
18. J. Seo, J. Jeon, Y.H. Hwang, H. Park, M. Ryu, S.K. Park, and B. Bae, Sci. Rep. 3, 2085 (2013).10.1038/srep02085 ↗
19. S. Lee and W. Choi, J. Disp. Technol. 11, 698 (2015).10.1109/JDT.2015.2430848 ↗
20. Y.B. Yoo, J.H. Park, S.J. Lee, K.M. Song, and H.K. Baik, Jpn. J. Appl. Phys. 51, 040201 (2012).10.1143/JJAP.51.040201 ↗
21. J.S. Lee and W. Choi, J. Korean Phys. Soc. 64, 701 (2014).10.3938/jkps.64.701 ↗