journal article·2018-08

Design Optimization of a Thermoelectric Cooling Module Using Finite Element Simulations

Muhammad Abid, Ragnar Somdalen, Marina Sancho Rodrigo

Journal of Electronic Materials· Volume 47· Issue 8
Publisher page

Abstract

The thermoelectric industry is concerned about the size reduction, cooling performance and, ultimately, the production cost of thermoelectric modules. Optimization of the size and performance of a commercially available thermoelectric cooling module is considered using finite element simulations. Numerical simulations are performed on eight different three-dimensional geometries of a single thermocouple, and the results are further extended for a whole module as well. The maximum temperature rise at the hot and cold sides of a thermocouple is determined by altering its height and cross-sectional area. The influence of the soldering layer is analyzed numerically using temperature dependent and temperature independent thermoelectric properties of the solder material and the semiconductor pellets. Experiments are conducted to test the cooling performance of the thermoelectric module and the results are compared with the results obtained through simulations. Finally, cooling rate and maximum coefficient of performance (COPmax) are computed using convective and non-convective boundary conditions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal properties of materials · Heat Transfer and Optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. S. Riffat and X. Ma, Appl. Therm. Eng. 23, 913 (2003).10.1016/S1359-4311(03)00012-7 ↗
2. J.C. Bass, D.T. Allen, S. Ghamaty, and N.B. Elsner, in 20th IEEE Semiconductor Thermal Management and management symposium (2004).
3. H.J. Goldsmid, Introduction to Thermoelectricity (Springer Series in Materials Science, 2009).10.1007/978-3-642-00716-3 ↗
4. M.T. Terry, Semiconductors and Semimetals. Recent Trends in Thermoelectric Materials Research (London: Academic Press, 2000).
5. Y. Pan, B. Lin, and J. Chen, Appl. Energy 84, 882 (2007).10.1016/j.apenergy.2007.02.008 ↗
6. M.T. Terry and M.A. Subramanian, Thermoelectric Materials, Phenomena, and Applications: A Bird’s Eye View (Cambridge: MRS Bulletin, 2006).
7. A. Kyunghan, L. Changpeng, U. Ctirad, and G.K. Mercouri, Chem. Mater. 21, 1362 (2009).
8. X. Yukun, C. Guoxin, Q. Haiming, W. Menglei, X. Zhepeng, J. Jun, X. Jingtao, J. Haochuan, and X. Gaojie, J. Mater. Chem. A 2, 8512 (2014).10.1039/c4ta01554a ↗
9. Y. Jihui and C. Thierry, Mater. Res. Soc. 3, 224 (2006).
10. M. Fankai, C. Lingen, and S. Fengrui, Cryogenics 49, 57 (2009).10.1016/j.cryogenics.2008.11.005 ↗
11. H.L. Kong and J.K. Ook, Int. J. Heat Mass Transfer 50, 1982 (2007).10.1016/j.ijheatmasstransfer.2006.09.037 ↗
12. R.R. Chethan, S.R. Shrikantha, D. Vijay, and R. Karthikeyan, Int. J. Sci. Res. 2, 242 (2013).
13. Y. Kazuaki and S. Ali, J. Mater. Res. 27, 1211 (2012).10.1557/jmr.2012.79 ↗
14. K. Takashi, K. Kazuhisa, M. Kazuya, K. Takeshi, K. Hiromasa, H. Hirokuni, M. Hidetoshi, and F. Akio, J. Electron. Mater. 43, 2405 (2014).10.1007/s11664-014-3094-5 ↗
15. P. Dipak and R.R. Arakerimath, Int. J. Res. Aeron. Mech. Eng. 1, 1 (2013).
16. N.R. Kristiansen, G.J. Snyder, H.K. Nielsen, and L. Rosendahl, J. Electron. Mater. 41, 1024 (2012).10.1007/s11664-012-2009-6 ↗
17. C.R. Kumar, A. Sonthalia, and G. Rahul, Ther. Sci. 15, 1011 (2011).10.2298/TSCI100518053K ↗
18. J.H. Meng, X.X. Zhang, and X.D. Wang, Energy 71, 367 (2014).10.1016/j.energy.2014.04.082 ↗
19. J.H. Meng, X.X. Zhang, and X.D. Wang, J. Power Sources 245, 262 (2014).10.1016/j.jpowsour.2013.06.127 ↗
20. D.M. Rowe, Int. J. Innov. Energy Syst. Power 1, 13 (2006).
21. A. Attar, H. Lee, and W. Sean, J. Electron. Mater. 43, 2179 (2014).10.1007/s11664-014-3001-0 ↗
22. Z. Dongliang and T. Gang, Appl. Therm. Eng. 66, 15 (2014).10.1016/j.applthermaleng.2014.01.074 ↗
23. B.J. Huang, C.J. Chin, and C.L. Duang, Int. J. Refrig. 23, 208 (2000).10.1016/S0140-7007(99)00046-8 ↗
24. S. Limei, T. Zhilong, H. Qiang, T. Cheng, and C. Huanxin, Appl. Therm. Eng. 112, 688 (2017).10.1016/j.applthermaleng.2016.10.094 ↗
25. O. Sullivan, M.P. Gupta, S. Mukhopadhyay, and S. Kumar, J. Electron. Packag. 134, 1 (2012).10.1115/1.4006141 ↗
26. S.P. Gajendra, B.T. Abhijeet, and K.S. Babalu, in International Conference on Advances in Engineering and Technology (2014), pp. 28–33.
27. R.E. Simons, M.J. Ellsworth, and R.C. Chu, ASME J. Heat Trans. 127, 76 (2005).10.1115/1.1852496 ↗
28. N. Peranio, Structural, chemical, and thermoelectric properties of Bi2Te3 Peltier materials: bulk, thin films and superlattices. Ph.D. thesis. Von der Fakult¨at f¨ur Mathematik und Physik der Eberhard-Karls-Universität zu Tübingen (2008).
29. K. Park, S.W. Nam, and C.H. Lim, Intermetallics 18, 1744 (2010).10.1016/j.intermet.2010.05.011 ↗
30. H.J. Goldsmid, Materials 7, 2577 (2014).10.3390/ma7042577 ↗
31. M. Hodes, IEEE Trans. Comp. Packag. Technol. 30, 50 (2007).10.1109/TCAPT.2007.892068 ↗
32. W.H. Chen, C.Y. Liao, and C.I. Hung, Appl. Energy 89, 464 (2012).10.1016/j.apenergy.2011.08.022 ↗
33. Y.X. Huang, X.D. Wang, C.H. Cheng, and D.T. Lin, Energy 59, 689 (2013).10.1016/j.energy.2013.06.069 ↗
34. X.L. Gou, H. Xiao, and S.W. Yang, Appl. Energy 87, 3131 (2010).10.1016/j.apenergy.2010.02.013 ↗
35. Y.H. Cheng and W.K. Lin, Appl. Therm. Eng. 25, 2983 (2005).10.1016/j.applthermaleng.2005.03.007 ↗
36. M. Hodes, IEEE Trans. Compon. Packag. Technol. 28, 219 (2005).10.1109/TCAPT.2005.848532 ↗
37. D.M. Rowe, Handbook of Thermoelectrics (Boston: CRC Press, 1995).10.1201/9781420049718 ↗
38. H.S. Lee, Energy 56, 61 (2013).10.1016/j.energy.2013.04.049 ↗
39. C. Godart, A.P. Goncalves, E.B. Lopes, and B. Villeroy, NATO Science for Peace Security Series B: Physics and Biophysics (2009), pp. 19–50.
40. T.Y. Lin, C.N. Liao, and T.W. Albert, J. Electron. Mater. 1, 153 (2012).10.1007/s11664-011-1740-8 ↗
41. S. Mhiaoui, Physical properties of lead free solders in liquid and solid state. Ph.D. thesis. Von der Fakult¨at f¨ur Naturwissenschaften der Technischen Universit¨at Chemnitz (2007).
42. M. Picard, S. Turenne, D. Vasilevskiy, and R.A. Masut, J. Electron. Mater. 7, 2343 (2013).10.1007/s11664-012-2435-5 ↗
43. W.H. Chen, C.C. Wang, C. Hung, C.C. Yang, and R.C. Juang, Energy 64, 287 (2014).10.1016/j.energy.2013.10.073 ↗
44. H. Olle and R. Andersson, J. Electron. Mater. 6, 2247 (2014).
45. K.S. Kim, K. Suganuma, J.M. Kim, and C.W. Hwang, Miner. Met. Mater. Soc. 6, 39 (2004).10.1007/s11837-004-0109-3 ↗
46. X.D. Wang, Y.X. Huang, C.H. Cheng, D. Lin, and C.H. Kang, Energy 47, 488 (2012).10.1016/j.energy.2012.09.019 ↗
47. J.H. Meng, X.X. Zhang, and X.D. Wang, Int. J. Heat Mass Transfer 80, 227 (2015).10.1016/j.ijheatmasstransfer.2014.09.023 ↗