Effects of Er3+ and Pr3+ Substitution on Structural, Dielectric, Ferroelectric and Photoluminescence Properties of the BaTi0.9Zr0.1O3 Ceramic
Source abstract
Abstract
BaTi0.9Zr0.1O3 (BZT), Ba1−x Ln2x/3□ x/3Ti0.9Zr0.1O3 (with x = 0.5% mol and Ln = Er3+) (BZT-Er) and Ba1−x Ln2x/3□ x/3Ti0.9Zr0.1O3 (with x = 0.5% mol and Ln = Pr3+) (BZT-Pr) were prepared via the conventional solid-state reaction method. X-ray diffraction showed that all these ceramics were in the single perovskite phase at room temperature (RT). The temperature dependence of dielectric behavior was investigated in the temperature range 25–225°C and exhibited a classical ferroelectric behavior. A slight decrease of the Curie temperature (T C) with Pr3+ and Er3+ substitution was observed in addition to an increase in the maximum dielectric permittivity ( $$ \varepsilon_{r\,\rm{max} }^{{\prime }} $$ ) of about 40% for the BZT-Er. At RT, the ferroelectric and piezoelectric coefficients were decreased for BZT-Pr, but were maintained for BZT-Er with a piezoelectric coefficient (d 33) of 185 pC/N, a planar electromechanical coupling factor of 30%, and a remanent polarization of 11.6 μC/cm2. The Raman bands as a function of temperature confirmed the paraelectric-ferroelectric phase transition of all those ceramics. The photoluminescence spectra showed that strong red (615 nm and 645 nm) and bright green (523 nm and 545 nm) emission bands were obtained, under excitation by laser at 488 nm at RT, for BZT-Pr and BZT-Er, respectively. These multifunctional materials showed a significant technological promise in coupling device applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Acoustic Wave Resonator Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. F. Benabdallah, A. Simon, H. Khemakhem, C. Elissalde, and M. Maglione, J. Appl. Phys. 109, 124116 (2011).10.1063/1.3599854 ↗
2. J. Ravez and A. Simon, Eur. Phys. J. Appl. Phys. 11, 9 (2000).10.1051/epjap:2000140 ↗
3. Y. Zhi, A. Chen, R. Guo, and A.S. Bhalla, J. Appl. Phys. 92, 1489 (2002).10.1063/1.1487435 ↗
4. C.M. Wu, T.B. Wu, and M.L. Chen, Appl. Phys. Lett. 69, 2659 (1996).10.1063/1.117550 ↗
5. X.G. Tang, J. Wang, X.X. Wang, and H.L.W. Chan, Solid State Commun. 131, 163 (2004).10.1016/j.ssc.2004.05.016 ↗
6. J. Qi, Z. Gui, Y. Wang, Q. Li, T. Li, and L. Li, J. Mater. Sci. Lett. 21, 405 (2002).10.1023/A:1014975721600 ↗
7. H. Chen, C. Yang, C. Fu, J. Shi, J. Zhang, and W. Leng, J. Mater. Sci.: Mater. Electron. 19, 379 (2008).10.1016/j.msea.2007.07.069 ↗
8. S.B. Reddy, K. Prasad Rao, and M.S. Ramachandra Rao, Scripta Mater. 57, 591 (2007).10.1016/j.scriptamat.2007.06.015 ↗
9. S.J. Kuang, X.G. Tang, L.Y. Li, Y.P. Jiang, and Q.X. Liu, Scripta Mater. 6, 68 (2009).10.1016/j.scriptamat.2009.03.016 ↗
10. X. Chou, J. Zhai, H. Jiang, and X. Yao, J. Appl. Phys. 102, 084106 (2007).10.1063/1.2799081 ↗
11. Q. Zhang, H. Sun, X. Wang, Y. Zhang, and X. Li, J. Eur. Ceram. Soc. 34, 1439 (2014).10.1016/j.jeurceramsoc.2013.11.028 ↗
12. W. Li, Z. Xu, R. Chu, P. Fu, and G. Zang, J. Alloys Compd. 583, 305 (2014).10.1016/j.jallcom.2013.08.103 ↗
13. A. Kerfah, K. Taibi, A. Guehria-Laidoudi, A. Simon, and J. Ravez, Solid State Sci. 8, 613 (2006).10.1016/j.solidstatesciences.2006.02.033 ↗
14. L. Guo, C. Zhong, X. Wang, and L. Li, J. Alloys Compd. 530, 22 (2012).10.1016/j.jallcom.2012.03.092 ↗
15. P. Du, L. Luo, W. Li, Y. Zhang, and H. Chen, Mater. Sci. Eng., B 178, 1219 (2013).10.1016/j.mseb.2013.08.007 ↗
16. P. Du, L. Luo, W. Li, Y. Zhang, and H. Chen, J. Alloys Compd. 551, 219 (2013).10.1016/j.jallcom.2012.10.003 ↗
17. P. Du, L. Luo, W. Li, Y. Zhang, and H. Chen, J. Alloys Compd. 559, 92 (2013).10.1016/j.jallcom.2013.01.096 ↗
18. Y. Zhao, X. Yuan, Y. Zhao, H. Zhou, J. Li, and HB. Jin, Mater. Lett. 162, 226 (2016).10.1016/j.matlet.2015.10.013 ↗
19. C. Ostos, L. Mestres, M.L. Martinez-Sarrion, J.E. Garcia, A. Albareda, and R. Perez, Solid State Sci. 11, 1016 (2009).10.1016/j.solidstatesciences.2009.01.006 ↗
20. J. Quan Qi, B. Bo Liu, H. Yong Tian, H. Zou, Z. Xing Yue, and L. Tu Li, Solid State Sci. 14, 1520 (2012).10.1016/j.solidstatesciences.2012.08.009 ↗
21. M. Ganguly, S.K. Rout, T.P. Sinha, S.K. Sharma, H.Y. Park, C.W. Ahn, and I.W. Kim, J. Alloys Compd. 579, 473 (2013).10.1016/j.jallcom.2013.06.104 ↗
22. B.K. Lee, S.Y. Chung, and S.J.L. Kang, J. Am. Ceram. Soc. 83, 2858 (2000).10.1111/j.1151-2916.2000.tb01645.x ↗
23. Y. Kaneko, F. Azough, T. Kida, K. Ito, T. Shimada, T. Minemura, B. Schaffer, and R. Freer, J. Am. Ceram. Soc. 95, 3928 (2012).10.1111/j.1551-2916.2012.05423.x ↗
24. J. Rodriguez-Carvajal, Program Fullprof, Laboratoire Léon Brillouin, (CEA-CNRS), Version May 2009, LLB-JRC, (2010).
25. R.D. Shannon, Acta Crystallogr. A 32, 751 (1976).10.1107/S0567739476001551 ↗
26. S. Mahboob, A.B. Dutta, C. Prakash, G. Swaminathan, S.V. Suryanarayana, G. Prasad, and G.S. Kumar, Mater. Sci. Eng., B 134, 36 (2006).10.1016/j.mseb.2006.06.050 ↗
27. M. Zannen, M. Dietze, H. Khemakhem, A. Kabadou, and M. ES-Souni, Ceram. Int. B 40, 13461 (2014).10.1016/j.ceramint.2014.05.069 ↗
28. V.S. Puli, D.K. Pradhan, W. Pérez, and R.S. Katiyar, J. Phys. Chem. Solids 74, 466 (2013).10.1016/j.jpcs.2012.11.012 ↗
29. J.C. Sczancoski, L.S. Cavalcante, T. Badapanda, S.K. Rout, S. Panigrahi, V.R. Mastelaro, J.A. Varela, M. Siu Li, and E. Longo, Solid State Sci. 12, 1160 (2010).10.1016/j.solidstatesciences.2010.04.002 ↗
30. Y.J. Jiang, L.Z. Zeng, R.P. Wang, Y. Zhu, and L. Lia, J. Raman Spectrosc. 27, 31 (1996).10.1002/(SICI)1097-4555(199601)27:1<31::AID-JRS920>3.0.CO;2-K ↗
31. B. Wang and L. Zhang, Phys. Status Solidi A 169, 57 (1998).10.1002/(SICI)1521-396X(199809)169:1<57::AID-PSSA57>3.0.CO;2-J ↗
32. Y. Zhi, A. Chen, P. M. Vilarinho, P. Q. Mantas, and J. L. Baptista, J. Eur. Ceram. Soc. 18, 1613 (1998).10.1016/S0955-2219(98)00027-2 ↗
33. X. Diez-Betriu, J.E. Garcia, C. Ostos, A.U. Boya, D.A. Ochoa, L. Mestres, and R. Perez, Mater. Chem. Phys. 125, 493 (2011).10.1016/j.matchemphys.2010.10.027 ↗
34. Y. Chen, X. Dong, R. Liang, J. Li, and Y. Wang, J. Appl. Phys. 98, 064107 (2005).10.1063/1.2058194 ↗
35. D. Hennings, A. Schnell, and G. Simon, J. Am. Ceram. Soc. 65, 539 (1982).10.1111/j.1151-2916.1982.tb10778.x ↗
36. F. Moura, A.Z. Simoes, B.D. Stojanovic, M.A. Zaghete, E. Longo, and J.A. Varela, J. Alloys Compd. 462, 129 (2008).10.1016/j.jallcom.2007.07.077 ↗
37. M.J. Haun, E. Furman, Z.Q. Zhuang, S.J. Jang, and L.E. Cross, Ferroelectrics 14, 313 (1989).10.1080/00150198908014273 ↗
38. S.Q. Man, H.L. Zhang, Y.L. Liu, J.X. Meng, E.Y.B. Pun, and P.S. Chung, Opt. Mater. 30, 334 (2007).10.1016/j.optmat.2006.11.045 ↗
39. S. Kuo, C. Chen, T. Tseng, S. Chang, and W. Hsieh, J. Appl. Phys. 92, 1868 (2002).10.1063/1.1492870 ↗