journal article·2017-03

Microstructure and Properties of KSr2Nb5O15 Ceramics with Excess K+

Min Wang, Feng Gao, Jie Xu, Chaochao Zhang, Mengjie Qin, Li Wang, Yiting Guo

Journal of Electronic Materials· Volume 46· Issue 3
Publisher page

Abstract

KSr2Nb5O15-xK (KSN-xK, x = 0 mol.%, 4 mol.%, 8 mol.%, 12 mol.%, 16 mol.%, and 20 mol.%) lead-free ferroelectric ceramics have been prepared by a buried sintering method using needle-like KSN particles synthesized by molten salt synthesis, and their microstructure, dielectric properties, and infrared transmittance investigated. The results suggest that the KSN-xK ceramics had simplex tungsten bronze structure for x ≤ 12 mol.%, but K2Nb8O21 secondary phase appeared at higher x. Excess K+ compensated the shortage of A-site ions in KSN crystallites, alleviated lattice distortion, and drove the KSN component closer to stoichiometric ratio, all of which increased the Curie temperature. The dielectric relaxor behavior of the ceramics was enhanced as the excess K+ content was increased. The dielectric constant, dielectric tunability, and infrared transmittance initially increased then decreased with increasing x. The specimen with 12 mol.% excess K+ showed optimum electrical properties, including maximum infrared transmittance of ∼60%. This work confirms that A-site vacancies in KSN can be compensated by excess K+, and that this effect can be used to adjust the local composition, alleviate structural distortion of the oxygen octahedron, enhance the Curie temperature, etc.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Multiferroics and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. N. Setter, D. Damjanovic, L. Eng, G. Fox, S. Gevorgian, S. Hong, A. Kingon, H. Kohlstedt, N.Y. Park, G.B. Stephenson, I. Stolitchnov, A.K. Taganstev, D.V. Taylor, T. Yamada, and S. Streiffer, J. Appl. Phys. 100, 051606 (2006).10.1063/1.2336999 ↗
2. R.R. Neurgaonkar, W.K. Cory, J.R. Oliver, E.J. Sharp, G.L. Wood, and G.J. Salamo, Ferroelectrics 142, 167 (1993).10.1080/00150199308237896 ↗
3. E.L. Venturini, E.G. Spencer, P.V. Lenzo, and A.A. Ballman, J. Appl. Phys. 39, 343 (1968).10.1063/1.1655759 ↗
4. Y. Saito, H. Takao, T. Tani, T. Nonoyama, K. Takatori, T. Homma, T. Nagaya, and M. Nakamura, Nature 432, 84 (2004).10.1038/nature03028 ↗
5. J. Zhang, G. Wang, F. Gao, C.L. Mao, F. Cao, and X.L. Dong, Ceram. Int. 39, 1971 (2013).10.1016/j.ceramint.2012.08.048 ↗
6. R. Clarke and F.W. Ainger, Ferroelectrics 7, 101 (1974).10.1080/00150197408237961 ↗
7. E.A. Giess, G. Burns, D.F. O’Kane, and A.W. Smith, Appl. Phys. Lett. 11, 233 (1967).10.1063/1.1755113 ↗
8. S. Lanfredi, C.X. Cardoso, and M.A.L. Nobre, Mater. Sci. Eng. B 112, 139 (2004).10.1016/j.mseb.2004.05.021 ↗
9. M.H. Francombe, Acta Cryst. 13, 131 (1960).10.1107/S0365110X60000285 ↗
10. P.B. Jamieson, S.C. Abrahams, and J.L. Bernstein, J. Chem. Phys. 50, 4352 (1969).10.1063/1.1670903 ↗
11. L.L. Liu, J. Mater. Sci. Mater. Electron. 26, 4425 (2015).10.1007/s10854-015-2920-8 ↗
12. S.L. Xu, J.H. Lee, J.J. Kim, H.Y. Lee, and S.H. Cho, Mater. Sci. Eng. B 99, 483 (2003).10.1016/S0921-5107(02)00488-9 ↗
13. C.C. Zhang, F. Gao, X.B. Yan, M. Wang, Q.Q. Zhang, M.J. Qin, and L. Wang, Ceram. Int. 42, 242 (2016).10.1016/j.ceramint.2015.08.101 ↗
14. L.L. Liu, F. Gao, G.X. Hu, and J.N. Liu, Adv. Powder Technol. 25, 219 (2014).10.1016/j.apt.2013.04.002 ↗
15. G.X. Hu, F. Gao, L.L. Liu, B. Xu, and Z.T. Liu, J. Alloys Compd. 518, 44 (2012).10.1016/j.jallcom.2011.12.105 ↗
16. R. Clarke and J.C. Burnout, Ferroelectrics 8, 1 (1974).10.1080/00150197408234141 ↗
17. A. Bhanumathi, S.N. Murty, K. Umakantham, K.C. Mouli, G. Padmavathi, K.T. Rao, and V. Syamalamba, Ferroelectrics 102, 173 (1990).10.1080/00150199008221476 ↗
18. L.L. Liu, F. Gao, G.X. Hu, and J.N. Liu, Powder Technol. 235, 806 (2013).10.1016/j.powtec.2012.11.040 ↗
19. R.J. Xie and Y. Akimune, J. Mater. Chem. 12, 3156 (2002).10.1039/B202923P ↗
20. C.Y. Liu, Z.W. Lan, X.N. Jiang, Z. Yu, K. Sun, L. Li, and P. Liu, J. Magn. Magn. Mater. 320, 1335 (2008).10.1016/j.jmmm.2007.10.016 ↗
21. W.D. Kingery, J. Appl. Phys. 3, 30 (1959).
22. M.N. Rahaman, Ceramic Processing and Sintering (New York: Marcel Decker, 1995).
23. Y.J. Park, N.M. Hwang, and D.Y. Yoon, Metall. Trans. A 27, 2809 (1996).10.1007/BF02652373 ↗
24. L.L. Liu, Y.M. Zhang, Z.P. Hou, and F. Gao, J. Mater. Sci. Mater. Electron. 27, 11055 (2016).10.1007/s10854-016-5222-x ↗
25. L.L. Liu and F. Gao, Ferroelectrics 474, 99 (2015).10.1080/00150193.2015.996455 ↗
26. G.X. Hu, F. Gao, L.L. Liu, Z.Q. Deng, and Z.T. Liu, IEEE Trans. Ultrason. Ferr. 60, 1287 (2013).10.1109/TUFFC.2013.2703 ↗
27. L.L. Liu, F. Gao, G.X. Hu, J.N. Liu, and J.J. Li, J. Alloys Compd. 508, 93 (2013).10.1016/j.jallcom.2013.05.093 ↗
28. V. Hornebecq, C. Huber, M. Maglione, M. Antonietti, and C. Elissalde, Adv. Funct. Mater. 14, 899 (2004).10.1002/adfm.200305052 ↗
29. L.L. Pang, Z.G. Wang, J.R. Sun, C.F. Yao, X. Gao, K.F. Wei, M.H. Cui, B.S. Li, T.L. Shen, Y.B. Sheng, H.L. Chang, and H.P. Zhang, Nucl. Instr. Meth. Phys. Res. B 354, 301 (2015).10.1016/j.nimb.2014.11.117 ↗
30. A. Krell, J. Klimke, and T. Hutzler, Opt. Mater. 31, 1144 (2009).10.1016/j.optmat.2008.12.009 ↗
31. M. Fox, Optical Properties of Solids, 1st ed. (Oxford: Oxford University Press, 2001), pp. 49–75.
32. J.G.J. Peelen and R. Metsellar, J. Appl. Phys. 45, 216 (1974).10.1063/1.1662961 ↗
33. J.M. Haussonne, G. Desgardin, A. Herve, and B. Boufrou, J. Eur. Ceram. Soc. 10, 437 (1992).10.1016/0955-2219(92)90019-A ↗
34. S. Tian, Physical Properties of Materials, 1st ed. (Beijing: Beijing University of Aeronautics and Astronautics Press, 2002), pp. 122–134.