journal article·2015-06

Unileg Thermoelectric Generator Design for Oxide Thermoelectrics and Generalization of the Unileg Design Using an Idealized Metal

Waruna Wijesekara, Lasse Rosendahl, David R. Brown, G. Jeffrey Snyder

Journal of Electronic Materials· Volume 44· Issue 6
Publisher page

Abstract

The unileg thermoelectric generator (U-TEG) is an increasingly popular concept in the design of thermoelectric generators (TEGs). In this study, an oxide U-TEG design for high-temperature applications is introduced. For the unicouple TEG design, Ca3Co4O9 and Al-doped ZnO are used as the p- and n-leg thermoelectric materials, respectively. For the U-TEG design, constantan and Ca3Co4O9 are employed as conductor and semiconductor, respectively. The reduced current approach (RCA) technique is used to design the unicouple TEG and U-TEG in order to obtain the optimal area ratio. When both the unicouple TEG and U-TEG were subjected to a heat flux of 20 W/cm2, the volumetric power density was 0.18 W/cm3 and 0.44 W/cm3, respectively. Thermal shorting between the hot and cold sides of the generator through the highly thermally conducting conductor, which is one of the major drawbacks of the U-TEG, is overcome by using the optimal area ratio for conductor and semiconductor given by the RCA. The results are further confirmed by finite-element analysis using COMSOL Multiphysics software. Furthermore, the U-TEG design is generalized by using an idealized metal with zero Seebeck coefficient. Even though the idealized metal has no impact on the power output of the U-TEG and all the power in the system is generated by the semiconductor, the U-TEG design succeeded in producing a higher volumetric power density than the unicouple TEG design.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal properties of materials · Thermal Radiation and Cooling Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. T. Nemoto, T. Iida, J. Sato, T. Sakamoto, N. Hirayama, T. Nakajima, and Y. Takanashi, J. Electron. Mater. 42, 2192 (2013).10.1007/s11664-013-2569-0 ↗
2. D. Madan, A. Chen, P.K. Wright, and J.W. Evans, J. Electron. Mater. 41, 1481 (2012).10.1007/s11664-011-1885-5 ↗
3. D. Madan, Z. Wang, A. Chen, R.-C. Juang, J. Keist, P.K. Wright, and J.W. Evans, ACS Appl. Mater. Interfaces 4, 6117 (2012).10.1021/am301759a ↗
4. N. Wu, T.C. Holgate, N. Van Nong, N. Pryds, and S. Linderoth, J. Electron. Mater. 42, 2134 (2013).10.1007/s11664-013-2546-7 ↗
5. L. Han, L.T. Hung, N. van Nong, N. Pryds, and S. Linderoth, J. Electron. Mater. 42, 1573 (2012).10.1007/s11664-012-2325-x ↗
6. G.J. Snyder, in Thermoelectr. Handb. Macro to Nano (Taylor & Francis, Boca Raton, 2006), Chapter 11, pp. 1–26.
7. G. Snyder and T. Ursell, Phys. Rev. Lett. 91, 148301 (2003).10.1103/PhysRevLett.91.148301 ↗
8. H. Muta, K. Kurosaki, M. Uno, and S. Yamanaka, J. Alloys Compd. 359, 326 (2003).10.1016/S0925-8388(03)00295-0 ↗
9. C. Cagran, T. Hüpf, G. Pottlacher, and G. Lohöfer, Int. J. Thermophys. 28, 2176 (2007).10.1007/s10765-007-0245-4 ↗
10. W. Brückner, S. Baunack, G. Reiss, G. Leitner, and T. Knuth, Thin Solid Films 258, 252 (1995).10.1016/0040-6090(94)06358-3 ↗
11. F.J. DiSalvo, Science (80) 285, 703 (1999).10.1126/science.285.5428.703 ↗
12. G.J. Snyder and E.S. Toberer, Nat. Mater. 7, 105 (2008).10.1038/nmat2090 ↗
13. D.R. Smith and F.R. Fickett, J. Res. Natl. Inst. Stand. Technol. 100, 119 (1995).10.6028/jres.100.012 ↗
14. Y.A. Cengel, R.H. Turner, and J.M. Cimbala, in Fundam. Therm. - Fluid Sci., 3rd ed. (McGraw Hill Higher Education, Singapore, 2008), pp. 653–722.